Manta-M4P issues

FAN2B header does not exist

4

In the documentation FAN2B is documented with pins 24V and PD4. PD4 does not exist in H616 Chip FAN2B Header it on PCB Is it FAN3B?

x2ocoder

M4P_Voron0_Mounting bracket. STL does not fit the mounting holes to the board

3 D model M4P_Voron0_Mounting bracket does not fit the mounting holes to the board

AleksKar-Bon

No bootloader Manta M4P-CB1 issue during set up

1

Hello, I am having an issue where I am reaching the stage where I am setting up the firmware for klipper. I am using a terminal and get to the...

Park8706

Ditch the full size SD Card

1

I went to set up my Manta M4P and nearly said WTF when it was requiring the use of a FULL SIZED SD CARD!!! Come on BigTreeTech --- who wants...

spankurmonkey

Can you connect a filament runout sensor to this board?

1

The manual claims it's possible, but I can't find any connection on the board named `FIL-DET`, or indeed, any `-DET`-type at all. Am I missing something?

kozross

HDMI does not work on V2.1 but does work on V2.2

I have an HDMI screen that does work on a V2.2 board but does not work on a V2.1. What do I need to do on the V2.1 board to...

kieraneglin

M4P green led stopped lighting up(led2) and board has stopped working

1

I had the Manta m4p working just fine, then randomly, while I unplugged the HDMI manta board stopped working. It still provides power to all components plugged into it but...

the-m0m0

Manta-M4P with CB1 and BTT SoC-Fan

3

When setting up the SoC-Fan, no voltage is applied to the port > [temperature_fan охлаждение_процессора_и_двигателей] > pin: PC15 > shutdown_speed: 0.0 > kick_start_time: 0.5 > off_below: 0.19 > min_temp: 0...

DiTheRX