40 Pin Header - CB1 GPIO Not Working PG7, PG8, PG9, PH10

Open x2ocoder opened this issue 3 years ago • 2 comments

The following pins do not have any output response with CB1

PG7, PG8, PG9, PH10

Nov 16 '22 14:11 x2ocoder

PG7/8/9 is documented as going to the BT Module in this PDF PH10 is documented as Reserved GPIO in this PDF yet is exposed on the 40 Pin Header https://github.com/bigtreetech/CB1/blob/master/Hardware/BIGTREETECH_CB1_V22_220812_SCH.pdf

Does PG7/8/9, PH10 also go to the 40 Pin Header as documented in Page 9 of this PDF? https://github.com/bigtreetech/Manta-M4P/blob/master/BIGTREETECH_MANTA_M4P_User_Manual.pdf

Jan 05 '23 06:01 x2ocoder

Have taken this down as something to correct. Will get onto it with the team a little later today. Thanks for pointing it out.

Jan 05 '23 06:01 looxonline