Manta-M4P

Manta-M4P copied to clipboard

Difference between v2.1 and v2.2

4

Are there any significant difference between current v2.2 version and previous v2.1? In `Hardware` folder only 2.1 documentation available, can it be updated?

asychev

ls /dev/serial/by-id/ always returns no file or directory found.

9

I have used both a compiled flash and one downloaded on the github along side the OS and in both cases I get the same error with my USB plugged...

Park8706

Unable to read tmc uart 'stepper_z' register IFCNT

1

when I try to home any axis or all of them I get this error.  [klippy (5).log](https://github.com/bigtreetech/Manta-M4P/files/14116661/klippy.5.log)

greggs12

Hi! Sorry if its too basic to ask. I am new to this! I want to ask if I want to use external Motor driver for my stepper motor, can...

SWAMI511

Manta-M4P with CB1 and BTT HDMI5

6

I have a problem with the activation of the BTT HDMI5 in the Manta-M4P and the CB1. How do I activate the HDMI port so that I can use the...

Kudach

How to connect SFS 2.0?

10

One cable from SFS 2.0 goes to E0-STOP, this is clear. Where to connect second?

asychev

RGB ports configuration

7

Hi. I spend few days now trying to get the RGB porst to work with no sucess. I try diferent RGBW and still no go. I'm using klipper and the...

acosano

I recently picked up the U2C V2.1, SBB2209, and Knomi V2 to upgrade my stealthburner setup. After two days of discord walk throughs we still cannot find a proper UUID...

Coolbobjoe

M4P / M8P CAN support with EBB42

4

I would like to use the M4P (with a Raspberry Pi CM4) and the EBB42 tool board. Is this combination possible? I will be running Klipper on the raspberry pi...

cstrachan88

leonmarkacz