MMU2-DIP
MMU2-DIP copied to clipboard
bigtreetech
MMU 3-axis stepper control
I have tried and tried I cannot get the mmu2 dip to communicate with the skr 1.4 turbo any and all help would be appreciated I'm running marlin 2.0.7.2 I've...
This is a very bad model. Almost nothing lines up. Considering you make the PCB and have all the dimensions, this is really not acceptable. With USB on the left...
MMU2-dip board is not port-aware. Created "firmware.hex" file with Visual Studio Code program You have currently installed the CH340 driver on Windows 10. And when I buy the board, I...
By connecting the two boards and using the Marlin 2.0.8 firmware downloaded precompiled from the Ender_5 configuration I have only one problem, when the MMU2 sensor does not see the...
Hi, i have connected the MMU2 to my SKR 1.4. I can not communicate with MMU2. Wiring is ok. when i connect my PC to SKR i get the MMU2...
I've hook up the power correctly.... But the board is not powering up. Works with USB no problem and uploaded HEX. file I've tried it with 12v and 24v ....?...
Hi, I wanted to know if it was possible to increase the number of extruders to 10? This should be possible by modifying the code and the led codes. Thanks.
Hi can you provide serial settings for Marlin 2.1.1 for the MMU2-DIP connecting to TFT on SKR Mini E3 v3?
Hi, Could you provide the pinout and shematics of this board in order to port the klipper firmware on it.
As a filament detection sensor, the proximity sensor was purchased as an NPN NO type and the filament detection was reversed. Is there any way to use this sensor now...