CB1
CB1 copied to clipboard
bigtreetech
OS System image for CB1
Hi, Trying to connect ds1307 rtc module to CB1+PI4B The overlays dtb file says that they are on the pins i2c0 "PI6", "PI7", i2c3 "PH4", "PH5". i2c1 pins are missing....
根据首页说明，在emmc系统刷了这个镜像。 https://github.com/bigtreetech/CB1/releases/download/V2.3.3/CB1_Debian11_minimal_kernel5.16_20230712.img.xz 之后手动安装图形界面openarena游戏和mesa-utils apt-get install xserver-xorg xinit lxde mate-desktop* openarena mesa-utils 测试游戏openarena和glxgears均不能正常显示。 而dosbox和浏览器访问bilibili.com均正常。 glxinfo输出如下 ``` name of display: :0 display: :0 screen: 0 direct rendering: Yes server glx vendor string:...
7” dumb display capable of tons of resolutions. This should just work right out of the box, period.
Hello there, so I had everything setup, then over a longer period of time I had my whole hotend disassembled and waited for parts for some months. Everything has arrived,...
I am not able to get my C920 camera working the CB1 does see if when it is plugged in.
Hi. I have a working custom RPI CM4 board. CB1 module (v2.2) after power on eats 120ma from 5V bus and it looks like it can't start. RX/TX shows nothing,...
I used raspberry pi imager to install `CB1_Debian11_bullseye_Klipper_kernel5.16_20221110.img` which was successful. However, after it was done installing there was no fat32 partition and windows (10) did not allow me to...
Does anyone know how to find the serial ID when using 1W DS18B20 Temp Sensor? This doesn't work only for raspberry pi "ls /sys/bus/w1/devices/" Thanks
I can get through to step 7. The volume mounts but when I try to write the image, I got a USB error. I've tried both Raspberry Pi Imager and...
How do you enable 1-wire on the CB1, specifcally for the DS18B20 sensor. Currently I use them on 3 of my machines that have enclosures to keep an eye on...
