BTT-TFT35-E3-V3.0

BTT-TFT35-E3-V3.0 copied to clipboard

btt tft35 v3 overheating

2

Hi :) Just purchased my first fdm printer (Creality Cr-10) Previous owner has done some work to it. But it has its flaws. As soon as i power on the...

kporabik

Black Screen

1

I updated my screen with BIGTREE_GD_TFT35_V3.0_E3.27.x.bin. It updates (at least I can see the percentage going up) and goes into black screen. It used to work nicely before. Obviously, it...

KilotsuzPilot

My TFT35-E3 touch screen displays random characters on the Left edge and scramble the screen from time to time

3

I've been having problems with my Z offset not being remembered and problems with the display in Marlin (mostly), When I try to readjust the offset in the Marlin mode...

chobson303

Update, forgot to include a file

1

I just realized I forgot to include the config.ini[ ](https://raw.githubusercontent.com/devinsheppard/TFT35_GD_E3_V3.0.1/main/Bin%20Files/config.ini)

devinsheppard

BTT TFT35 E3 V3.0.1 will not connect to the main board.

1

I'm using the BTT TFT35 E3 V3.0.1 GD and an SKR Mini E3 V3 with a RPi4. I used Kiauh to install mainsail, moonraker, klipper and fluidd. All of that...

devinsheppard

BTT SKR MINI E3 V3 AND TFT35 E3 V3.01 TOUCH MODE CONSTANTLY RESETS AND 'NO PRINTER ATTACHED' MESSAGE IS CONTINUOUS.

3

I HAVE AN ENDER 3 PRO AND I JUST REPLACED THE MOTHERBOARD AND THE SCREEN. I UPDATED THE FIRMWARE TO THE LATEST ON THE TFT DEVICE. I HAVE CHECKED 50...

Jhendrix0875

continuous pauses on SKR Mini E3 v1.2 with TFT35 E3 v3.0

22

Hello guys, i get continuous small pauses in the print when the mini e3 and the tft are connected. It seems like the tft is causing the board to wait...

nachosan100

Random freezes

18

I have an btt skr mini e3 v3 with marlin 2.1.1 and a tft35 e3 v3 running on my artillery sidewinder x1. When using the sdcard slot or usb port...

Thomas-tuta

setup BLtouch and edit mesh error

51

I am trying to setup mesh edit, because now bl touch tries to probe bed out of limit where is nothing. I tried everything but still stuck on it. Can...

Blisk

[BUG] (Stuck on Select Mode, Touch mode Not working after a minute or so)

24

I was adjusting my K values for Lin_Advance, it was all ok, after the printer finish, I turn it off (after waiting nozzle go under to 60C). Then I turn...

fenix8k