BTT-Expansion-module icon indicating copy to clipboard operation
BTT-Expansion-module copied to clipboard

Published 20 hours ago • verified publisher icon bigtreetech

M1_CS pin

Open bakaufman opened this issue 4 years ago • 2 comments

Which pin is used for CS? the diagram only include RX, EN, DIR, STEP, DIAG but not for CS. Help!

bakaufman avatar Oct 11 '20 21:10 bakaufman

Cs pin... Chip select pin is used for spi mode. So if you want to use spi you will need to pull from somwhere else. With uart mode you dont need that pin

TheStankec avatar Jan 10 '21 12:01 TheStankec

You need Uart_Pin which is same as CS pin in spi mode and assigning rx pin as uart pin is not working .

Shamoon78 avatar Jan 16 '24 03:01 Shamoon78