BIGTREETECH-SKR-V1.3 icon indicating copy to clipboard operation
BIGTREETECH-SKR-V1.3 copied to clipboard

Published 20 hours ago • verified publisher icon bigtreetech

SKR V1.4 don't load firmware

Open killrob opened this issue 2 years ago • 1 comments

Hi all, my SKR V1.4 suddenly don't load frimware from TF card, is possible to load it via USB with Xloader or Ultimaker Cura? or how can i reset completely the board?

killrob avatar Mar 26 '22 23:03 killrob

Try reformatting the card to FAT32, or try another card (preferably 8GB or less). Try more SD cards.

As a last resort, it should go upload via ST-Link. https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/issues/346

Or use a modified botloader and then it should go upload via USB. But I haven't tried it personally.

https://github.com/ardiehl/BTT_SKR_13_14_14T_SD-DFU-Bootloader https://github.com/GadgetAngel/BTT_SKR_13_14_14T_SD-DFU-Bootloader

radek8 avatar Mar 27 '22 21:03 radek8