BIGTREETECH-SKR-V1.1
BIGTREETECH-SKR-V1.1 copied to clipboard
bigtreetech
32bit board with LPC1768, support marlin2.0 and smoothieware
Hello, Where can I find documentation for jumper settings for this board? I'm specifically looking for a way to put my TMC 2130 (BTT v1.1) to this board SKR v1.1...
Hi, I would like to know if it's possible to use this display with this board and how should be the configuration file to make it works. From now with...
the marlin 2.0 firmware does not compile with the current version of platformio. Does anyone have a new version which works? i get an error message, which i do not...
Long story short I believe i shorted my thermistor pin on the board and can no longer read the signal. I wanted to change the pin from thermistor 0 to...
Add round bracket to every print instruction in order to compile properly with PlatformIO
I have a printrbot simple metal that i added this board to. it previously was using a KFB2.0 that burned out. the Z probe owrked fine on that board. Now,...
The pinout map does not correspond with the marlin pins file. This is a bit of an issue for setting spi pins properly
On SKR V1.1 stopped worked a sd card reader on LCD screen after update to a new marlin firmware helps only use from previous file version pins_BIGTREE_SKR_V1.1.h from github `/**...
When using the LCD connector (EXP 1 and EXP 2) for controlling all axis and extruders there is an issue when it comes to using the default P1.31(EXP 2 pin...
Metadata
Owner
Metadata
32bit board with LPC1768, support marlin2.0 and smoothieware