BIGTREETECH-OCTOPUS-V1.0
BIGTREETECH-OCTOPUS-V1.0 copied to clipboard
How to configure ps_on on klipper J36 / PE11
Hi, Im trying to use the ps_on pins with klipper whit the SKR Octopus 1.1, but it doesnt work. I am using PE11 from J36 to power a Relay, but I have not been successful. This is my config on klipper:
[output_pin ps_on]
pin: PE11
value: 1
I use a BTT Relay 1.2 and it works fine:
[output_pin power] pin: PE11 value: 1 shutdown_value: 0
FWIW there are two connections on the relay. I had to use the furthest from the logo on the top of the board but this config did work.