BIGTREETECH-OCTOPUS-Pro
BIGTREETECH-OCTOPUS-Pro copied to clipboard
bigtreetech
This is OCTOPUS Pro open source material
Is there any way to have both SD Card and USB Drive work together. If I enable `#define SDCARD_CONNECTION LCD` and `#define USB_FLASH_DRIVE_SUPPORT` I can only use USB Drive. when...
  How can I get the ez5160 pro's diag pins to be used on the octopus pro board? The ez connector diag pin is located on the clk of...
many of ESP12-(S/*) modules on amazon/aliexpress/ebay have other pinout (on silkprints they are same for available same-sized ) as on BTT used make sure and at least take a look...
subj. or that only make sound like "Oh, Power-lo-ss oc..c...u....r......e.......d" ?
Board intended for 4 Hotends. so ... multimaterial is choosen and requires more than 300C (even such is only by some, most thermistors works till 280С ) - then inputs...
I have a 446 and I can get it into DFU mode no worries. (BOOT0 is fine) It flashes klipper and reboots into it fine. But if I remove the...
Hello, I am thinking to use octopus to control a 6 axis robot, is there is a way to develop a new firmware for custom applications. Unfortunately i cant able...
I NEED BIN FILE FOR BTT OCTOPUS PRO V1.1 (H723) WITH TMC2209 DRIVERS, I AM NOT ABLE GET THE FIRMWARE IT WAS SHOWING ERRORS PLZ HELP.. BOARD BOARD_BTT_OCTOPUS_PRO_V1_0 ENV: STM32H723ZE_btt
I have tried every combination possible to use the onboard MAX31865 chip so i can run a PT1000 on the Octopus Pro with klipper, no matter the settings the error...
The Octopus pro V1.1 board with the STM32FH723ZE chip is lacking with clear information. I feel like in an effort to save time any information on that particular board was...
