BIGTREETECH-MINI-UPS-V2.0 icon indicating copy to clipboard operation
BIGTREETECH-MINI-UPS-V2.0 copied to clipboard

Published 20 hours ago • verified publisher icon bigtreetech

ups detect also power outage by starting the printer

Open TB1405 opened this issue 5 years ago • 5 comments

I hvae a problem with the mini UPS 24V. The modul detect the power outage succesful and the Z Axis raise 10mm up. But if i power on the printer again the modul detect again a power outage and now the axis raises again 10mm up. But if i now continue the print the nozzle is 10mm above the obeject.

TB1405 avatar Dec 07 '19 16:12 TB1405

I have the same problem. The printer responds when the power is turned on instead of a power outage during printing. Did you deal with it?

dziabi3 avatar Feb 03 '20 15:02 dziabi3

I didn't bother with the UPS. Unfortunately I cannot help there

TB1405 avatar Feb 03 '20 15:02 TB1405

Ho lo stesso problema. La stampante risponde quando viene accesa l'alimentazione anziché un'interruzione di corrente durante la stampa. L'hai affrontato?

Have you found any solution? Even my print resumes with a difference of 10mm ....

TheMiguelBi avatar Apr 30 '20 17:04 TheMiguelBi

Out of curiosity, which display do you use ?? 🧐 I have done many other tests today. Here the detail: bigtreetech/BIGTREETECH-TouchScreenFirmware#644

TheMiguelBi avatar May 01 '20 15:05 TheMiguelBi

Hi...I contacted BTT And they sent me files claiming they have tested it on BTT SKR MINI E3V2 AND BTT UPS 24V for Ender 3..but I'm still facing same issue with their firmware also....can u test it on your machine...and let me know??.... thanks...link https://drive.google.com/folderview?id=1lLJ8wB38pCyJNlhxEXdSRXJNUCHG2Eis

atharvbadkas avatar Dec 18 '20 11:12 atharvbadkas