bert269

WIS build show as **willow-inference-server:latest** I reinstalled WIS yesterday with this scipt after stopping and removing the containers: 

no it does not - it seems perfecty fine and it ends with only the '......couldn't understand that'. Over the ESP-boxes it sounds like an additional word: "then" is added

dioes not make a difference. They get powered cycle a lot.

....Or will it be possible to make that an 'selectable option' in the configuration menu? - to select the 'success' and 'failure' sound? Granted - the sound file probably should...

Also - the middle button does not wake the device always. The only way to get out of this 'sleep state' is to press reset. Please let me know if...

Device has very erratic response - 1/10 times it would work. Sometimes afer wake-word it turns onto screen "Say Command" and stuck there. Other times it does not even respond...

Yes. I do have an older Intel NUC -i3 laying around that I can deploy Debian on and do another flash-test. Al the compiles and linking seems to went fine...

ok. I managed to get Ubuntu installed on an older NUC box. I restarted and are trying to flash, but this is the result: _[ 1479.461248] usb 1-1: new full-speed...

Sure: ` bert@NUC-Ubuntu:~/willow$ id uid=1000(bert) gid=1000(bert) groups=1000(bert),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),122(lpadmin),134(lxd),135(sambashare) bert@NUC-Ubuntu:~/willow$ ls -al /dev/ttyACM0 crw-rw---- 1 root dialout 166, 0 May 26 14:30 /dev/ttyACM0 `

I am running it with sudo (as I discovered it early on during the build process). Look at the output from three posts ago - I use sudo ./utils.sh .....I...