which file to print pcb?

[digimbyte]

Hello, I would buy the board, but after conversion and international shipping, it would cost $150 to send. I would instead like to get the pcb printed and hand solder the components, but I do not know what file to send to the pcb fabricator. is it the Gerber files? https://github.com/bdring/Grbl_ESP32_MPCNC_Controller/tree/master/gerbers if so, what is the latest? v1p2 or v1p2p1?

[bdring]

The latest version is V1p2p2. I added it to the repo

[digimbyte]

Awesome! Thank you! just a final question, but do you have a parts/component list somewhere? I would need to order the parts to hand solder and know where to play some things.

[bdring]

There should have been a spreadsheet in there somewhere

On Tue, Dec 1, 2020 at 7:29 PM DIGI Byte [email protected] wrote:

Awesome! Thank you! just a final question, but do you have a parts/component list somewhere? I would need to order the parts to hand solder and know where to play some things.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/bdring/Grbl_ESP32_MPCNC_Controller/issues/16#issuecomment-736927561, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABOJ3KWXNXFE67WW3TNA6DSSWJ75ANCNFSM4UHYQBCQ .

-- Bart Dring

"If you did not build it, you will never own it"

[ledfreak3d]

dip file missing for latest pcb else i cant create pick and place file

[digimbyte]

Following up, I have the board printed, still, FOUND the spreadsheet for parts, uploaded here for ease of use https://drive.google.com/file/d/1y-1JvpqACTF4xXB_mZf0SvkP85wMdah4/view?usp=sharing

[digimbyte]

I've been able to source most parts for a reasonable price except the PNP - Darlington 500mA 30V 250mW SOT-23(SOT-23-3) Darlington Transistors RoHS

is there an alternative but spec-specific requirement? I found 5A versions and 45V and 60V versions https://www.aliexpress.com/item/33043446978.html

[Alexander1987777]

Хотел бы заказать плату по её номеру с монтажем. Возможно

[Alexander1987777]

??

[Alexander1987777]

Где-то там должна была быть таблица … Во вторник, 1 декабря 2020 г., в 19:29 DIGI Byte @.***> написал: Замечательно! Спасибо! последний вопрос, но есть ли у вас где-нибудь список деталей / компонентов? Мне нужно было бы заказать детали для ручной пайки и знать, где кое-что сыграть. - Вы получили это, потому что прокомментировали. Ответьте на это письмо напрямую, просмотрите его на GitHub < # 16 (comment) > или откажитесь от подписки < https://github.com/notifications/unsubscribe-auth/AABOJ3KWXNXFE67WW3TNA6DSSWJ75ANCNFSM4UHYQBCQ >.

• Барт Дринг «Если вы не построили его, вы никогда не станете его владельцем»

Последняя версия - V1p2p2. Я добавил это в репо

Где-то там должна была быть таблица … On Tue, Dec 1, 2020 at 7:29 PM DIGI Byte @.***> wrote: Awesome! Thank you! just a final question, but do you have a parts/component list somewhere? I would need to order the parts to hand solder and know where to play some things. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#16 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABOJ3KWXNXFE67WW3TNA6DSSWJ75ANCNFSM4UHYQBCQ . -- Bart Dring "If you did not build it, you will never own it"

Могу ли я такие платы заказать?