bdring
Problem: How to configure 6x CNC Controller for FluidNC for a Y axis with two stepper motors and ball screw drives.
Wiki Search Terms
dual motor axis, dual axis motors
Controller Board
6-pack/6x CNC Controller for FluidNC
Machine Description
Langmuir systems MR-1 CNC mill. Looking to replace the controller board for greater functionality. Need to know if the firmware can be set up to accommodate two stepper motors and two limit switches for the Y axis, and if yes, then how. Thank you.
Input Circuits
NA. See below.
Configuration file
NA. See below.
Startup Messages
NA. See below.
User Interface Software
No response
What happened?
NA. See below.
GCode File
No response
Other Information
I have not purchased the board yet. I want to know if the board can accommodate the situation described above before I spend the money on something that won't work. Also, the VFD spindle must support both CW and CCW operation. Thank you.
We support the dual Y with auto squaring. See the wikiand here is an example.
https://github.com/bdring/fluidnc-config-files/blob/main/contributed/6x_CNC_Controller/6x_xyyz_pwm.yaml
We support CW and CCW
Hi, is possible this configuration?
6x_XYZXAB_pwm.yaml
Please be more specific about what you want.
