PMSBLM

PMSBLM copied to clipboard

Prusa Mini Firmware 5.1.0 uses new Unified Bed Leveling Mesh Output

25

Hi, I've used your tool and mod in the past to greatly improve my bed leveling on the Mini. Ever since the update to 5.1.0 however I can no longer...

thomasvnl

Mesh sizes

5

The latest MINI alpha firmware uses a 6x6 mesh size instead of 4x4 or 7x7, would it be possible to add this as an option to the 'G29 absolute to...

5tu

DIN 7991 not working for me

1

Found that #3 mentions "the 16mm screws are DIN 965 or DIN 7991", which I'm assuming is why the guide says either works. My experience says DIN 7991 does not...

bstansell

Would 4mm ID tubing work?

2

I'm in actual sourcing hell, and the best I've been able to find locally whose temperature resistance I can verify is 4mm ID, 7mm OD. Would this work, or is...

kozross

Wrong silicon tube in the manual

3

U cant use silicon from: https://fmic.pl/laczniki-silikonowe/193-5923-przewod-podcisnienia-3mm-vacuum.html The tube is 9.8mm OD

islonina

I seem to be unable to find the right silicone tubing - either the inner diameter is wrong, or it's regular silicone tubing with a heat resistance of 200°C and...

Einkatzi

Add Prusa i3 MK3.5 support please

11

Hey, it would be great if you could do a support for the Prusa MK3.5s :)

Investegate