r8152
r8152 copied to clipboard
bb-qq
Works for a while on DS420+ rear port
Issue: Installs and works for a while but after a few hours, and possibly when under load copying files, the device disconnects from the network. The dongle looks fine with connection light lit and activity light flashing but nothing is working.
My environment: DS420+ DSM 6.2.3-25426 Update 3 Port: USB3.0 at back USBC-E2500 driver: r8152-geminilake-2.14.0-2.spk
Can you try the front port? Some users reported stability issues when they use rear ports.
Sure thing. I was wondering why that might be given the ports are the same. I will or course give it a try and report back, thank you.
On Sun, 10 Jan 2021 at 12:06, bb-qq [email protected] wrote:
Can you try the front port? Some users reported stability issues when they use rear ports.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/bb-qq/r8152/issues/84#issuecomment-757465391, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB6PW744I26SUROVVQLR6F3SZGJ5JANCNFSM4V3ZAKWQ .
-- Regards,
Jim
Strange my 916+ worked flawlessly for weeks ... today I had 2 disconnects ...
Sure thing. I was wondering why that might be given the ports are the same. I will or course give it a try and report back, thank you.
What were the results? @mrbroons The front ports are soldered directly to the motherboard, while the rear ports are via the daughter card. This seems to affect the signal quality or something else.
Strange my 916+ worked flawlessly for weeks ... today I had 2 disconnects ...
After all, how often is a disconnection likely to occur?
Strange my 916+ worked flawlessly for weeks ... today I had 2 disconnects ...
After all, how often is a disconnection likely to occur?
I didn't had disconnects in normal usage but when I'm transferring a lot of files then sometimes it will disconnect