DS224+ Successful install of driver and adapter working but fails after less than a day
Description of the problem
I managed to install the correct driver and conenct the adapter to my DS224+, and everything was working well until less than a day later the lights on the adaptor went off. I double checked the adaptor by connecting it to a lan cable and to a TV, and the lights came on, meaning that its not an adaptor issue,
I've uninstalled and reinstalled the driver to no avail. I've tried the front ports too. I've think I've done everything short of getting a new adapter which im averse to. The below outputs are without the adaptor connected, as i cant get access to my NAS with the adaptor.
One small note, i am able to see my NAS in find.synology.com when using the adaptor, but it shows the IP of LAN 1 instead of LAN 3 or 4.
Description of your products
- DS224+
- x86_64 GNU/Linux synology_geminilake_224+
- DSM version 7.2.2-72806
- UGREEN UG-CM648-25051 USB TO RJ45 ETHERNET ADAPTER CONVERTER
Description of your environment
- NAS connected directly to router via Cat6
Output of dmesg command
[dmesg.txt](https://github.com/user-attachments/files/21566975/dmesg.txt)
Output of lsusb command
|__usb1 1d6b:0002:0404 09 2.00 480MBit/s 0mA 1IF (Linux 4.4.302+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub
|__1-4 f400:f400:0100 00 2.00 480MBit/s 200mA 1IF (Synology DiskStation 65003A692C81C604)
|__usb2 1d6b:0003:0404 09 3.00 5000MBit/s 0mA 1IF (Linux 4.4.302+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub
Output of ifconfig -a command
docker0 Link encap:Ethernet HWaddr 02:42:37:0A:C7:51
inet addr:172.17.0.1 Bcast:172.17.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 90:09:D0:52:5B:8A
inet addr:192.168.0.109 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12832 errors:0 dropped:0 overruns:0 frame:0
TX packets:7926 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4273119 (4.0 MiB) TX bytes:7619738 (7.2 MiB)
Interrupt:84 base 0x2000
eth1 Link encap:Ethernet HWaddr 90:09:D0:52:5B:8B
inet addr:169.254.241.88 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:85 base 0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:18401 errors:0 dropped:0 overruns:0 frame:0
TX packets:18401 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:9759257 (9.3 MiB) TX bytes:9759257 (9.3 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.302+ (root@build5) (gcc version 12.2.0 (GCC) ) #72806 SMP Mon Jul 21 23:14:27 CST 2025
[ 0.000000] Command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS224+ vender_format_version=2 synoboot2 sn=23A0WBR1BSJA4 macs=9009d0525b8a,9009d0525b8b syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000070f9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070f9e000-0x000000007149dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007149e000-0x000000007789dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007789e000-0x0000000077a9dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077a9e000-0x0000000077addfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077ade000-0x0000000078d5efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078d5f000-0x000000007965efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007965f000-0x0000000079bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079c00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x01deca10-0x01deca1f] usable ==> usable
[ 0.000000] e820: update [mem 0x59b5e020-0x59b5e4e9] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001deca0f] usable
[ 0.000000] reserve setup_data: [mem 0x0000000001deca10-0x0000000001deca1f] usable
[ 0.000000] reserve setup_data: [mem 0x0000000001deca20-0x000000000fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000012151000-0x0000000059b5e01f] usable
[ 0.000000] reserve setup_data: [mem 0x0000000059b5e020-0x0000000059b5e4e9] usable
[ 0.000000] reserve setup_data: [mem 0x0000000059b5e4ea-0x0000000070f9dfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070f9e000-0x000000007149dfff] type 20
[ 0.000000] reserve setup_data: [mem 0x000000007149e000-0x000000007789dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007789e000-0x0000000077a9dfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000077a9e000-0x0000000077addfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000077ade000-0x0000000078d5efff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078d5f000-0x000000007965efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007965f000-0x0000000079bfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000079c00000-0x000000007fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] efi: EFI v2.60 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x77add000 ACPI 2.0=0x77add014 SMBIOS=0x74b45000 SMBIOS 3.0=0x74b43000 ESRT=0x74b46218
[ 0.000000] esrt: Reserving ESRT space from 0x0000000074b46218 to 0x0000000074b46250.
[ 0.000000] SMBIOS 3.0.1 present.
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x79c00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-combining
[ 0.000000] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 2 base 007A000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 0090000000 mask 7FF0000000 write-combining
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] Base memory trampoline at [ffff88000007a000] 7a000 size 28672
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x370eb000-0x3786cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000077ADD014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x0000000077AB6188 0000F4 (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x0000000077AD3000 000114 (v06 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x0000000077AC1000 00AF67 (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000077A97000 000040
[ 0.000000] ACPI: FACS 0x0000000077A97000 000040
[ 0.000000] ACPI: UEFI 0x0000000077ADC000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000077ADB000 000042 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ADA000 000781 (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x0000000077AD9000 000034 (v04 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: BDAT 0x0000000077AD7000 000030 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x0000000077AD2000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x0000000077AD1000 00005C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000077AD0000 000084 (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000077ACF000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: NPKT 0x0000000077ACE000 000065 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: PRAM 0x0000000077ACD000 000030 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WSMT 0x0000000077ACC000 000028 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABE000 000271 (v02 INSYDE UsbCTabl 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABD000 000937 (v01 INSYDE Platform 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABC000 000583 (v02 INSYDE Cpu0Ist 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABB000 00072B (v02 INSYDE CpuSsdt 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABA000 00032D (v02 INSYDE Cpu0Tst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077AB9000 00017C (v02 INSYDE ApTst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077AB3000 00274C (v02 INSYDE SaSsdt 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x0000000077AB8000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x0000000077AC0000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x0000000077AD5000 000034 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x0000000077AD6000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x0000000077AD4000 0000A8 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x0000000077ABF000 000104 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000079bfffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x0000000000085fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000012151000-0x0000000070f9dfff]
[ 0.000000] node 0: [mem 0x0000000077ade000-0x0000000078d5efff]
[ 0.000000] node 0: [mem 0x000000007965f000-0x0000000079bfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079bfffff]
[ 0.000000] On node 0 totalpages: 460275
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3972 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7130 pages used for memmap
[ 0.000000] DMA32 zone: 456303 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SYNO Spinup Group 0: 1
[ 0.000000] SYNO Spinup Group 1: 1
[ 0.000000] SYNO Spinup Group Delay: 16
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x01dec000-0x01decfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x01dec000-0x01decfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x59b5e000-0x59b5efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x59b5e000-0x59b5efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x70f9e000-0x7149dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7149e000-0x7789dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7789e000-0x77a9dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77a9e000-0x77addfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78d5f000-0x7965efff]
[ 0.000000] e820: [mem 0x80000000-0xd3708fff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 37 pages/cpu @ffff880070800000 s111576 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s111576 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 453058
[ 0.000000] Kernel command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS224+ vender_format_version=2 synoboot2 sn=23A0WBR1BSJA4 macs=9009d0525b8a,9009d0525b8b syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[ 0.000000] DMAR: Disable GFX device mapping
[ 0.000000] Internal netif num: 2
[ 0.000000] Support HDD Dynamic Power.
[ 0.000000] Synology Hardware Version: DS224+
[ 0.000000] Vender format version: 2
[ 0.000000] Serial Number: 23A0WBR1BSJA4
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 1731992K/1841100K available (5667K kernel code, 869K rwdata, 1816K rodata, 984K init, 668K bss, 109108K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1996.692 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.38 BogoMIPS (lpj=1996692)
[ 0.011848] pid_max: default: 32768 minimum: 301
[ 0.017003] ACPI: Core revision 20150930
[ 0.034814] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.044006] Security Framework initialized
[ 0.048418] AppArmor: AppArmor initialized
[ 0.052980] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.060453] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.068656] Initializing cgroup subsys io
[ 0.072969] Initializing cgroup subsys memory
[ 0.077826] Initializing cgroup subsys devices
[ 0.082778] Initializing cgroup subsys freezer
[ 0.087766] CPU: Physical Processor ID: 0
[ 0.092197] CPU: Processor Core ID: 0
[ 0.104336] CPU0: Thermal monitoring enabled (TM1)
[ 0.109556] process: using mwait in idle threads
[ 0.114668] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.120589] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.127198] Speculative Store Bypass: Vulnerable
[ 0.134052] Freeing SMP alternatives memory: 24K
[ 0.145807] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.162332] TSC deadline timer enabled
[ 0.162337] smpboot: CPU0: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
[ 0.173165] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.184388] ... version: 4
[ 0.188853] ... bit width: 48
[ 0.193418] ... generic registers: 4
[ 0.197885] ... value mask: 0000ffffffffffff
[ 0.203809] ... max period: 00007fffffffffff
[ 0.209733] ... fixed-purpose events: 3
[ 0.214200] ... event mask: 000000070000000f
[ 0.220565] x86: Booting SMP configuration:
[ 0.225042] .... node #0, CPUs: #1 #2 #3
[ 0.261625] x86: Booted up 1 node, 4 CPUs
[ 0.266102] smpboot: Total of 4 processors activated (15973.53 BogoMIPS)
[ 0.278902] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.287995] devtmpfs: initialized
[ 0.291820] PM: Registering ACPI NVS region [mem 0x7789e000-0x77a9dfff] (2097152 bytes)
[ 0.300675] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.311452] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.318429] pinctrl core: initialized pinctrl subsystem
[ 0.324422] NET: Registered protocol family 16
[ 0.339222] cpuidle: using governor ladder
[ 0.350620] cpuidle: using governor menu
[ 0.354870] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.363255] ACPI: bus type PCI registered
[ 0.367804] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.378115] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.385693] PCI: Using configuration type 1 for base access
[ 0.398366] ACPI: Added _OSI(Module Device)
[ 0.402854] ACPI: Added _OSI(Processor Device)
[ 0.407795] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.413040] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.423517] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.440256] ACPI: Dynamic OEM Table Load:
[ 0.444544] ACPI: SSDT 0xFFFF880078B37800 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.454890] ACPI: Dynamic OEM Table Load:
[ 0.459167] ACPI: SSDT 0xFFFF880078B37A00 00015F (v02 PmRef ApIst 00003000 INTL 20130117)
[ 0.469329] ACPI: Dynamic OEM Table Load:
[ 0.473615] ACPI: SSDT 0xFFFF88006BF2E9C0 00008D (v02 PmRef ApCst 00003000 INTL 20130117)
[ 0.484499] ACPI: Interpreter enabled
[ 0.488414] ACPI: (supports S0 S4 S5)
[ 0.492473] ACPI: Using IOAPIC for interrupt routing
[ 0.498048] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.509144] ACPI: Power Resource [DRST] (on)
[ 0.514014] ACPI: Power Resource [DRST] (on)
[ 0.518891] ACPI: Power Resource [DRST] (on)
[ 0.523758] ACPI: Power Resource [DRST] (on)
[ 0.528623] ACPI: Power Resource [DRST] (on)
[ 0.533490] ACPI: Power Resource [DRST] (on)
[ 0.542114] ACPI: Power Resource [WRST] (on)
[ 0.550361] ACPI: Power Resource [FN00] (on)
[ 0.555499] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.562216] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.572089] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.579675] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.588805] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.600687] PCI host bridge to bus 0000:00
[ 0.605119] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.612013] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.619587] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.627162] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.634737] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.643088] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.651440] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.659791] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[ 0.668143] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
[ 0.676495] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.684847] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
[ 0.693201] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[ 0.701551] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
[ 0.709903] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
[ 0.718256] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
[ 0.726607] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
[ 0.734960] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
[ 0.743312] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
[ 0.751663] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
[ 0.760014] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.766144] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[ 0.766478] pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
[ 0.766498] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.766506] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.766512] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.766855] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[ 0.766906] pci 0000:00:0f.0: reg 0x10: [mem 0xa1212000-0xa1212fff 64bit]
[ 0.767007] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.767309] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[ 0.767334] pci 0000:00:12.0: reg 0x10: [mem 0xa1210000-0xa1211fff]
[ 0.767342] pci 0000:00:12.0: reg 0x14: [mem 0xa121b000-0xa121b0ff]
[ 0.767351] pci 0000:00:12.0: reg 0x18: [io 0x3080-0x3087]
[ 0.767361] pci 0000:00:12.0: reg 0x1c: [io 0x3088-0x308b]
[ 0.767370] pci 0000:00:12.0: reg 0x20: [io 0x3060-0x307f]
[ 0.767378] pci 0000:00:12.0: reg 0x24: [mem 0xa1219000-0xa12197ff]
[ 0.767413] pci 0000:00:12.0: PME# supported from D3hot
[ 0.767667] pci 0000:00:13.0: [8086:31d9] type 01 class 0x060400
[ 0.767737] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.767958] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.774138] pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
[ 0.774203] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[ 0.774424] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.780621] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[ 0.780651] pci 0000:00:15.0: reg 0x10: [mem 0xa1200000-0xa120ffff 64bit]
[ 0.780709] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.780932] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.787133] pci 0000:00:16.0: [8086:31ac] type 00 class 0x118000
[ 0.787162] pci 0000:00:16.0: reg 0x10: [mem 0xa1213000-0xa1213fff 64bit]
[ 0.787177] pci 0000:00:16.0: reg 0x18: [mem 0xa1214000-0xa1214fff 64bit]
[ 0.787503] pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
[ 0.787532] pci 0000:00:18.0: reg 0x10: [mem 0xa1215000-0xa1215fff 64bit]
[ 0.787546] pci 0000:00:18.0: reg 0x18: [mem 0xa1216000-0xa1216fff 64bit]
[ 0.787842] pci 0000:00:18.2: [8086:31c0] type 00 class 0x118000
[ 0.787873] pci 0000:00:18.2: reg 0x10: [mem 0xa1217000-0xa1217fff 64bit]
[ 0.787888] pci 0000:00:18.2: reg 0x18: [mem 0xa1218000-0xa1218fff 64bit]
[ 0.788228] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[ 0.788665] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[ 0.788728] pci 0000:00:1f.1: reg 0x10: [mem 0xa121a000-0xa121a0ff 64bit]
[ 0.788810] pci 0000:00:1f.1: reg 0x20: [io 0x3040-0x305f]
[ 0.789215] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.789258] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.789284] pci 0000:01:00.0: reg 0x18: [mem 0xa1104000-0xa1104fff 64bit]
[ 0.789301] pci 0000:01:00.0: reg 0x20: [mem 0xa1100000-0xa1103fff 64bit]
[ 0.789374] pci 0000:01:00.0: supports D1 D2
[ 0.789376] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.789436] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.797591] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.802956] pci 0000:00:13.0: bridge window [io 0x2000-0x2fff]
[ 0.802961] pci 0000:00:13.0: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.803026] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.803070] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.803096] pci 0000:02:00.0: reg 0x18: [mem 0xa1004000-0xa1004fff 64bit]
[ 0.803115] pci 0000:02:00.0: reg 0x20: [mem 0xa1000000-0xa1003fff 64bit]
[ 0.803186] pci 0000:02:00.0: supports D1 D2
[ 0.803189] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.803249] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.811398] pci 0000:00:13.2: PCI bridge to [bus 02]
[ 0.816755] pci 0000:00:13.2: bridge window [io 0x1000-0x1fff]
[ 0.816760] pci 0000:00:13.2: bridge window [mem 0xa1000000-0xa10fffff]
[ 0.816774] pci_bus 0000:00: on NUMA node 0
[ 0.817658] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.826484] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.835418] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.844352] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.853288] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.862220] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.871155] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.880090] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.890436] ACPI: Enabled 3 GPEs in block 00 to 7F
[ 0.895727] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.901902] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.910939] vgaarb: loaded
[ 0.913945] vgaarb: bridge control possible 0000:00:02.0
[ 0.919950] SCSI subsystem initialized
[ 0.924114] libata version 3.00 loaded.
[ 0.924182] pps_core: LinuxPPS API ver. 1 registered
[ 0.929583] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 0.939786] PTP clock support registered
[ 0.944240] EFI Variables Facility v0.08 2004-May-17
[ 1.007591] pstore: Registered efi as persistent store backend
[ 1.013930] PCI: Using ACPI for IRQ routing
[ 1.025427] PCI: pci_cache_line_size set to 64 bytes
[ 1.025513] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 1.025516] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[ 1.025518] e820: reserve RAM buffer [mem 0x01deca10-0x03ffffff]
[ 1.025520] e820: reserve RAM buffer [mem 0x59b5e020-0x5bffffff]
[ 1.025522] e820: reserve RAM buffer [mem 0x70f9e000-0x73ffffff]
[ 1.025523] e820: reserve RAM buffer [mem 0x78d5f000-0x7bffffff]
[ 1.025525] e820: reserve RAM buffer [mem 0x79c00000-0x7bffffff]
[ 1.025773] clocksource: Switched to clocksource hpet
[ 1.039947] AppArmor: AppArmor Filesystem Enabled
[ 1.045119] pnp: PnP ACPI init
[ 1.048548] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.055037] system 00:00: [io 0x0400-0x047f] has been reserved
[ 1.061638] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 1.068245] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.068903] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
[ 1.076509] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[ 1.083889] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[ 1.091268] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[ 1.098649] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[ 1.106031] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[ 1.113413] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[ 1.120833] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 1.128173] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.135556] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.135871] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.136054] pnp: PnP ACPI: found 3 devices
[ 1.149729] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.159491] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 1.165004] pci 0000:00:13.0: bridge window [io 0x2000-0x2fff]
[ 1.171846] pci 0000:00:13.0: bridge window [mem 0xa1100000-0xa11fffff]
[ 1.179378] pci 0000:00:13.2: PCI bridge to [bus 02]
[ 1.184909] pci 0000:00:13.2: bridge window [io 0x1000-0x1fff]
[ 1.191710] pci 0000:00:13.2: bridge window [mem 0xa1000000-0xa10fffff]
[ 1.199288] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.199291] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.199293] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.199296] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.199298] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.199301] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.199303] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 1.199306] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[ 1.199308] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
[ 1.199310] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
[ 1.199313] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
[ 1.199315] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
[ 1.199317] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
[ 1.199320] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
[ 1.199322] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
[ 1.199325] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
[ 1.199327] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
[ 1.199329] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
[ 1.199332] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
[ 1.199334] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.199337] pci_bus 0000:01: resource 1 [mem 0xa1100000-0xa11fffff]
[ 1.199339] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.199341] pci_bus 0000:02: resource 1 [mem 0xa1000000-0xa10fffff]
[ 1.199377] NET: Registered protocol family 2
[ 1.204187] IP idents hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.212182] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.220109] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.227494] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.234764] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.241446] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.248660] NET: Registered protocol family 1
[ 1.253502] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.255090] PCI: CLS 64 bytes, default 64
[ 1.535328] Trying to unpack rootfs image as initramfs...
[ 4.013546] decompress cpio completed and skip redundant lzma
[ 4.021606] Freeing initrd memory: 7688K
[ 4.025835] DMAR: Host address width 39
[ 4.030088] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[ 4.036029] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
[ 4.045333] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[ 4.051261] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[ 4.060093] DMAR: RMRR base: 0x000000777d7000 end: 0x000000777f6fff
[ 4.067079] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 4.074086] DMAR: No ATSR found
[ 4.077801] DMAR: dmar1: Using Queued invalidation
[ 4.082989] IOMMU passthrough mode = 1
[ 4.087170] DMAR: Hardware identity mapping for device 0000:00:00.0
[ 4.094141] DMAR: Hardware identity mapping for device 0000:00:0f.0
[ 4.101136] DMAR: Hardware identity mapping for device 0000:00:12.0
[ 4.108130] DMAR: Hardware identity mapping for device 0000:00:13.0
[ 4.115116] DMAR: Hardware identity mapping for device 0000:00:13.2
[ 4.122112] DMAR: Hardware identity mapping for device 0000:00:15.0
[ 4.129106] DMAR: Hardware identity mapping for device 0000:00:16.0
[ 4.136093] DMAR: Hardware identity mapping for device 0000:00:18.0
[ 4.143090] DMAR: Hardware identity mapping for device 0000:00:18.2
[ 4.150082] DMAR: Hardware identity mapping for device 0000:00:1f.0
[ 4.157068] DMAR: Hardware identity mapping for device 0000:00:1f.1
[ 4.164067] DMAR: Hardware identity mapping for device 0000:01:00.0
[ 4.171058] DMAR: Hardware identity mapping for device 0000:02:00.0
[ 4.178042] DMAR: Setting RMRR:
[ 4.181538] DMAR: Ignoring identity map for HW passthrough device 0000:00:15.0 [0x777d7000 - 0x777f6fff]
[ 4.192130] DMAR: Prepare 0-16MiB unity mapping for LPC
[ 4.197954] DMAR: Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
[ 4.207697] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 4.214911] iommu: Adding device 0000:00:00.0 to group 0
[ 4.220794] iommu: Adding device 0000:00:0f.0 to group 1
[ 4.226709] iommu: Adding device 0000:00:12.0 to group 2
[ 4.232637] iommu: Adding device 0000:00:13.0 to group 3
[ 4.238558] iommu: Adding device 0000:00:13.2 to group 4
[ 4.244481] iommu: Adding device 0000:00:15.0 to group 5
[ 4.250404] iommu: Adding device 0000:00:16.0 to group 6
[ 4.256328] iommu: Adding device 0000:00:18.0 to group 7
[ 4.262247] iommu: Adding device 0000:00:18.2 to group 7
[ 4.268175] iommu: Adding device 0000:00:1f.0 to group 8
[ 4.274093] iommu: Adding device 0000:00:1f.1 to group 8
[ 4.280048] iommu: Adding device 0000:01:00.0 to group 9
[ 4.285942] iommu: Adding device 0000:02:00.0 to group 10
[ 4.292758] audit: initializing netlink subsys (disabled)
[ 4.298642] audit: type=2000 audit(1574135962.011:1): initialized
[ 4.305682] Initialise system trusted keyring
[ 4.340763] VFS: Disk quotas dquot_6.6.0
[ 4.345107] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.481523] Key type asymmetric registered
[ 4.486007] Asymmetric key parser 'x509' registered
[ 4.491435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 4.499628] io scheduler noop registered
[ 4.504069] io scheduler deadline registered
[ 4.508817] io scheduler cfq registered (default)
[ 4.514617] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
[ 4.522235] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 4.529507] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded
[ 4.529551] pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt
[ 4.537271] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 4.544559] pcie_pme 0000:00:13.2:pcie01: service driver pcie_pme loaded
[ 4.904207] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.086952] Linux agpgart interface v0.103
[ 5.128487] brd: module loaded
[ 5.139618] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.148514] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.184325] dw-apb-uart.1: ttyS1 at MMIO 0xa1215000 (irq = 54, base_baud = 115200) is a 16550A
[ 5.204516] console [ttyS0] disabled
[ 5.208360] dw-apb-uart.2: ttyS0 at MMIO 0xa1217000 (irq = 6, base_baud = 115200) is a 16550A
[ 5.218053] console [ttyS0] enabled
[ 5.225655] bootconsole [earlyser0] disabled
[ 5.235345] Loading iSCSI transport class v2.0-870.
[ 5.242658] ahci 0000:00:12.0: version 3.0
[ 5.242933] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.252035] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
[ 5.263500] scsi host0: ahci
[ 5.270098] scsi host1: ahci
[ 5.273447] ata1 : SATA max UDMA/133 abar m2048@0xa1219000 port 0xa1219100 irq 338
[ 5.281936] ata2 : SATA max UDMA/133 abar m2048@0xa1219000 port 0xa1219180 irq 338
[ 5.290619] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.293069] tsc: Refined TSC clocksource calibration: 1996.803 MHz
[ 5.293071] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990c471fbb, max_idle_ns: 881590442488 ns
[ 5.317451] i8042: No controller found
[ 5.321825] mousedev: PS/2 mouse device common for all mice
[ 5.340760] rtc-s35390a i2c-RTC35390:00: rtc core: registered rtc-s35390a as rtc0
[ 5.349178] i2c /dev entries driver
[ 5.353395] i801_smbus 0000:00:1f.1: SMBus using polling
[ 5.361603] md: raid1 personality registered for level 1
[ 5.367722] NET: Registered protocol family 17
[ 5.372740] Key type dns_resolver registered
[ 5.377798] mce: Using 7 MCE banks
[ 5.381908] registered taskstats version 1
[ 5.386509] Loading compiled-in untrusted X.509 certificates
[ 5.392851] Loading compiled-in X.509 certificates
[ 5.398252] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[ 5.410887] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[ 5.422191] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[ 5.435148] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[ 5.446156] page_owner is disabled
[ 5.450075] AppArmor: AppArmor sha1 policy hashing enabled
[ 5.456894] rtc-s35390a i2c-RTC35390:00: setting system clock to 2025-08-29 07:00:00 UTC (1756450800)
[ 5.595104] ata1 (slot 2): SATA link down (SStatus 0 SControl 300)
[ 5.602053] ata1 (slot 2): Disk is not present for SATA link down event
[ 8.290852] clocksource: Switched to clocksource tsc
[ 13.644474] ata2 (slot 1): link is slow to respond, please be patient (ready=0)
[ 18.450760] ata2 (slot 1): softreset failed (device not ready)
[ 18.457280] ata2 (slot 1): SRST fail, set srst fail flag
[ 23.819042] ata2 (slot 1): link is slow to respond, please be patient (ready=0)
[ 28.625326] ata2 (slot 1): softreset failed (device not ready)
[ 28.631844] ata2 (slot 1): SRST fail, set srst fail flag
[ 31.192478] ata2 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 31.200264] ata2 (slot 1): link reset sucessfully clear error flags
[ 31.241571] ata2.00 (slot 1): disabling queued TRIM support
[ 31.241575] ata2.00 (slot 1): ATA-11: ST16000NM001G-2KK103, SN03, max UDMA/133
[ 31.249662] ata2.00 (slot 1): 31251759104 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 31.258702] ata2.00 (slot 1): SN: ZL26QDWN
[ 31.299872] ata2.00 (slot 1): disabling queued TRIM support
[ 31.299878] ata2.00 (slot 1): configured for UDMA/133
[ 31.306261] scsi 1:0:0:0: Direct-Access ATA ST16000NM001G-2KK103 SN03 PQ: 0 ANSI: 5
[ 31.316253] got SATA disk[0]
[ 31.319895] sd 1:0:0:0: [sata1] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB)
[ 31.328855] sd 1:0:0:0: [sata1] 4096-byte physical blocks
[ 31.335007] sd 1:0:0:0: [sata1] Write Protect is off
[ 31.340564] sd 1:0:0:0: [sata1] Mode Sense: 00 3a 00 10
[ 31.340604] sd 1:0:0:0: [sata1] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 31.415902] sata1: p1 p2 p5
[ 31.419501] sd 1:0:0:0: [sata1] Attached SCSI disk
[ 31.426150] Freeing unused kernel memory: 984K
[ 31.431118] Write protecting the kernel read-only data: 8192k
[ 31.437761] Freeing unused kernel memory: 468K
[ 31.443338] Freeing unused kernel memory: 232K
[ 31.594461] random: nonblocking pool is initialized
[ 31.649092] ACPI: bus type USB registered
[ 31.653615] usbcore: registered new interface driver usbfs
[ 31.659768] usbcore: registered new interface driver hub
[ 31.665726] usbcore: registered new interface driver ethub
[ 31.671869] usbcore: registered new device driver usb
[ 31.697672] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 31.704619] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 31.914019] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009010
[ 31.923455] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 31.923813] hub 1-0:1.0: USB hub found
[ 31.928053] hub 1-0:1.0: 9 ports detected
[ 31.932600] port1 is going to power up Vbus by GPIO#29(ACTIVE_HIGH)
[ 32.039736] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[ 32.048149] port2 is going to power up Vbus by GPIO#30(ACTIVE_HIGH)
[ 32.155261] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[ 32.164665] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 32.170505] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 32.178831] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 32.188132] hub 2-0:1.0: USB hub found
[ 32.192352] hub 2-0:1.0: 7 ports detected
[ 32.196893] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[ 32.205304] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[ 32.229795] geminilake_synobios: loading out-of-tree module taints kernel.
[ 32.248650] synobios open /dev/ttyS1 success
[ 32.263728] correction with 0x00
[ 32.268355] 2025-8-29 7:0:27 UTC
[ 32.271962] synobios: load, major number 201
[ 32.276732] Brand: Synology
[ 32.279851] Model: DS-224+
[ 32.282870] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 32.292310] synobios cpu_arch proc entry initialized
[ 32.297857] synobios crypto_hw proc entry initialized
[ 32.303500] synobios syno_platform proc entry initialized
[ 32.314578] Module [geminilake_synobios] is removed.
[ 32.323591] synobios: unload
[ 32.391619] xor: measuring software checksum speed
[ 32.407505] prefetch64-sse: 7424.000 MB/sec
[ 32.407516] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 32.429506] generic_sse: 6616.000 MB/sec
[ 32.434273] xor: using function: prefetch64-sse (7424.000 MB/sec)
[ 32.463517] raid6: sse2x1 gen() 4968 MB/s
[ 32.484519] raid6: sse2x1 xor() 3064 MB/s
[ 32.505512] raid6: sse2x2 gen() 5679 MB/s
[ 32.526517] raid6: sse2x2 xor() 3583 MB/s
[ 32.547519] raid6: sse2x4 gen() 6324 MB/s
[ 32.568528] raid6: sse2x4 xor() 2625 MB/s
[ 32.573299] raid6: using algorithm sse2x4 gen() 6324 MB/s
[ 32.579330] raid6: .... xor() 2625 MB/s, rmw enabled
[ 32.584874] raid6: using ssse3x2 recovery algorithm
[ 32.615226] Btrfs loaded, crc32c=crc32c-generic
[ 32.702075] md: md0 stopped.
[ 32.710463] md: bind
@bb-qq tried a new adapter, the adapter lights up, but finds.synology still shows the old ip (direct connect to lan cable), and can't connect to it
The dmesg log does not indicate that the r8152 USB Ethernet device was recognized. Please use lsusb to verify that it is connected at the USB level.