Support for belkin 2.5Gbps adaptor

[8roecyber8]

Description of the problem

Replace this line with your answer. Product link https://www.belkin.com/p/usb-c-to-2.5-gb-ethernet-adapter/INC012btBK.html - only shows 1000Mbps duplex option in adaptor

Logs for ethtool Settings for eth2: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full 2500baseX/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00007fff (32767) drv probe link timer ifdown ifup rx_err tx_err tx_queued intr tx_done rx_status pktdata hw wol Link detected: yes

Description of your products

• the product name of your NAS model
  • and output of uname -a command
  • DSM version x.x
• the product name of the ethernet dongle

Description of your environment

• connect directly to a PC or using a Ethernet switch
  • PC: NIC model name or chipset name
  • Ethernet switch: model name
• cable category (Cat.5e or Cat.6 or Cat.7)

Output of dmesg command

(paste output here, or attach as a file)

Output of lsusb command

(paste output here)

Output of ifconfig -a command

(paste output here)

[coronas2k]

• your dmesg link is not working
• What's the NIC or Switch model on the other side?
• See: #554 are you using a USB-C adapter? check lsusb for the speed. It should be 5000MBit/s.

[bb-qq]

Please check this article. https://github.com/bb-qq/r8152/wiki/Troubleshooting#reverse-the-orientation-of-the-type-c-connector