DS415+ slow upload speeds, kernel index fail error

Open sspeed22 opened this issue 6 months ago • 3 comments

### Description of the problem File copies transfer at less than gigabit speed, Active backup writes only transfer around 27 MB/s when it was transferring at nearly full gigabit speed on internal adapter.

Get a lot of these index fails in the kern.log when copying [ 224.924612] r8152 3-1:1.0: read type=0x0133, index=0xb414 fail -71 [ 411.161675] r8152 3-1:1.0: read type=0x01cc, index=0xb400 fail -71 [ 1468.619167] r8152 3-1:1.0: read type=0x0133, index=0xb400 fail -71 [ 1527.756258] perf interrupt took too long (2504 > 5000), lowering kernel.perf_event_max_sample_rate to 50000 [ 1555.760581] r8152 3-1:1.0: read type=0x0133, index=0xb400 fail -71 [ 1574.767477] r8152 3-1:1.0: read type=0x0133, index=0xb5d4 fail -71 [ 1601.803957] r8152 3-1:1.0: read type=0x01cc, index=0xb408 fail -71 [ 1732.981428] r8152 3-1:1.0: read type=0x01cc, index=0xb408 fail -71 [ 1759.016098] r8152 3-1:1.0: read type=0x01cc, index=0xb408 fail -71

### Description of your products

Synology DS415+ (avoton) DSM 7.1.1.42962 Update 8 YuLinca 4 Port 2.5G Network Switch with 2x10G SFP CableCreation 2.5G Ethernet to USB Adapter r8152-avoton-2.19.2-2_7.1.spk

ESXi 8.0 server -> Unifi 10gbe aggregation switch -> YuLinca -> DS415+

iperf3 from test client to DS415+ MTU:1500 Server (DS415+) listening on 5201 (test #3)

Accepted connection from 10.1.1.167 (test client), port 58936 [ 5] local 10.1.1.1 port 5201 connected to 10.1.1.167 port 58938 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 59.6 MBytes 500 Mbits/sec
[ 5] 1.00-2.00 sec 77.2 MBytes 647 Mbits/sec
[ 5] 2.00-3.00 sec 74.5 MBytes 625 Mbits/sec
[ 5] 3.00-4.00 sec 69.4 MBytes 582 Mbits/sec
[ 5] 4.00-5.00 sec 72.9 MBytes 612 Mbits/sec
[ 5] 5.00-6.00 sec 75.3 MBytes 631 Mbits/sec
[ 5] 6.00-7.00 sec 76.4 MBytes 641 Mbits/sec
[ 5] 7.00-8.00 sec 73.9 MBytes 620 Mbits/sec
[ 5] 8.00-9.00 sec 75.8 MBytes 636 Mbits/sec
[ 5] 9.00-10.00 sec 76.3 MBytes 640 Mbits/sec

[ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 731 MBytes 613 Mbits/sec receiver

iperf3 from test client to DS1817+ on 10gbe MTU:1500 Connecting to host 10.1.1.16, port 5201 [ 5] local 10.1.1.167 port 41812 connected to 10.1.1.16 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.05 GBytes 9.05 Gbits/sec 668 847 KBytes
[ 5] 1.00-2.00 sec 1.09 GBytes 9.35 Gbits/sec 359 1.46 MBytes
[ 5] 2.00-3.00 sec 1.03 GBytes 8.88 Gbits/sec 1155 1.39 MBytes
[ 5] 3.00-4.00 sec 1.08 GBytes 9.25 Gbits/sec 1008 1.37 MBytes
[ 5] 4.00-5.00 sec 1.06 GBytes 9.09 Gbits/sec 3 1.44 MBytes
[ 5] 5.00-6.00 sec 1.05 GBytes 9.05 Gbits/sec 165 1.36 MBytes
[ 5] 6.00-7.00 sec 1.07 GBytes 9.23 Gbits/sec 46 1.40 MBytes
[ 5] 7.00-8.00 sec 1.04 GBytes 8.91 Gbits/sec 308 1.02 MBytes
[ 5] 8.00-9.00 sec 1.04 GBytes 8.90 Gbits/sec 24 1.55 MBytes
[ 5] 9.00-10.00 sec 940 MBytes 7.88 Gbits/sec 228 1.39 MBytes

[ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 10.4 GBytes 8.96 Gbits/sec 3964 sender [ 5] 0.00-10.00 sec 10.4 GBytes 8.95 Gbits/sec receiver

iperf3 from DS415+ to test client MTU:1500 Connecting to host 10.1.1.167 (test client), port 5201 [ 5] local 10.1.1.1 port 58263 connected to 10.1.1.167 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 212 MBytes 1.78 Gbits/sec 0 635 KBytes
[ 5] 1.00-2.00 sec 211 MBytes 1.77 Gbits/sec 0 642 KBytes
[ 5] 2.00-3.00 sec 211 MBytes 1.77 Gbits/sec 0 648 KBytes
[ 5] 3.00-4.00 sec 211 MBytes 1.77 Gbits/sec 2 652 KBytes
[ 5] 4.00-5.00 sec 211 MBytes 1.77 Gbits/sec 0 652 KBytes
[ 5] 5.00-6.00 sec 207 MBytes 1.74 Gbits/sec 0 655 KBytes
[ 5] 6.00-7.00 sec 211 MBytes 1.77 Gbits/sec 0 656 KBytes
[ 5] 7.00-8.00 sec 210 MBytes 1.76 Gbits/sec 0 659 KBytes
[ 5] 8.00-9.00 sec 211 MBytes 1.77 Gbits/sec 0 680 KBytes
[ 5] 9.00-10.00 sec 211 MBytes 1.77 Gbits/sec 0 708 KBytes

[ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 2.06 GBytes 1.77 Gbits/sec 2 sender [ 5] 0.00-10.04 sec 2.06 GBytes 1.76 Gbits/sec receiver

iperf3 from DS1817+ on gbe to test client MTU:1500 Connecting to host 10.1.1.167, port 5201 [ 5] local 10.1.1.16 port 41163 connected to 10.1.1.167 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.09 GBytes 9.33 Gbits/sec 0 3.29 MBytes
[ 5] 1.00-2.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.41 MBytes
[ 5] 2.00-3.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.43 MBytes
[ 5] 3.00-4.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.49 MBytes
[ 5] 4.00-5.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.54 MBytes
[ 5] 5.00-6.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.58 MBytes
[ 5] 6.00-7.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.61 MBytes
[ 5] 7.00-8.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.66 MBytes
[ 5] 8.00-9.00 sec 1.09 GBytes 9.36 Gbits/sec 0 3.71 MBytes
[ 5] 9.00-10.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.75 MBytes

[ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 10.9 GBytes 9.37 Gbits/sec 0 sender [ 5] 0.00-10.04 sec 10.9 GBytes 9.34 Gbits/sec receiver

### Output of dmesg command [ 211.918421] WARNING: at //source/r8152/r8152.c:1400 ocp_read_word+0x7e/0x90 r8152 [ 211.927327] Modules linked in: bridge stp pci_stub vhost_net tun kvm_intel kvm fuse r8152(OF) 8021q vfat fat vhost_scsi(O) vhost(O) tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) udf isofs cifs synoacl_vfs(O) btrfs zstd_decompress ecryptfs zstd_compress xxhash raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx leds_lp3943 aesni_intel glue_helper lrw gf128mul ablk_helper syno_hddmon(P) avoton_synobios(PO) hid_generic usbhid hid usblp usb_storage qede(O) qed(O) mlx5_core(O) mlx4_en(O) mlx4_core(O) mlx_compat(O) atlantic_v2(O) atlantic(O) tn40xx(O) i40e(O) ixgbe(O) be2net(O) i2c_algo_bit openvswitch(O) gre nf_defrag_ipv6 nf_conntrack igb(O) e1000e(O) [ 212.013471] sg dm_snapshot crc_itu_t crc_ccitt psnap p8022 llc zlib_deflate libcrc32c hfsplus md4 hmac sit tunnel4 ipv6 zram(C) flashcache_syno(O) flashcache(O) syno_flashcache_control(O) dm_mod crc32c_intel cryptd arc4 sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq mperf processor thermal_sys cpufreq_stats freq_table vxlan ip_tunnel loop etxhci_hcd xhci_hcd uhci_hcd ehci_pci ehci_hcd usbcore usb_common [last unloaded: avoton_synobios] [ 212.069475] CPU: 2 PID: 10404 Comm: snmpd Tainted: PF C O 3.10.108 #42962 [ 212.077812] Hardware name: Insyde MohonPeak/Type2 - Board Product Name1, BIOS M.012 2017/05/09 [ 212.087501] ffffffff8147dfd1 ffffffff8146f5e1 0000000000000002 ffff88025198bbf4 [ 212.096210] ffff88025198bc2c 000000000000a000 ffff8802720f2000 ffffffffa0e4536e [ 212.104993] ffffffb900000000 ffffffff81289913 000000000000040a ffff8802720f26c0 [ 212.113790] Call Trace: [ 212.116655] [] ? dump_stack+0xc/0x15 [ 212.122618] [] ? warn_slowpath_common+0x56/0x6c [ 212.129676] [] ? ocp_read_word+0x7e/0x90 [r8152] [ 212.136833] [] ? number.isra.1+0x383/0x3e0 [ 212.143410] [] ? r8152_phy_read+0x63/0x90 [r8152] [ 212.150650] [] ? rtl8152_get_settings+0x1d5/0x390 [r8152] [ 212.158661] [] ? ethtool_get_settings+0x14f/0x170 [ 212.165920] [] ? seq_vprintf+0x25/0x50 [ 212.172095] [] ? seq_printf+0x40/0x50 [ 212.178254] [] ? dev_ethtool+0x414/0x1e00 [ 212.184769] [] ? inet_gifconf+0xb8/0x130 [ 212.191140] [] ? netdev_run_todo+0x4d/0x270 [ 212.197758] [] ? dev_ioctl+0xef/0x7c0 [ 212.203821] [] ? sk_setup_caps+0xc0/0xc0 [ 212.210203] [] ? wake_up_atomic_t+0x30/0x30 [ 212.216925] [] ? sock_do_ioctl+0x3f/0x50 [ 212.223360] [] ? sock_ioctl+0x217/0x270 [ 212.229691] [] ? do_vfs_ioctl+0x797/0x9d0 [ 212.236231] [] ? __fput+0x125/0x250 [ 212.242073] [] ? SyS_ioctl+0xa3/0xb0 [ 212.248033] [] ? system_call_fastpath+0x1c/0x21 [ 212.255080] ---[ end trace 4cb6a38bf888da7e ]--- [ 224.924612] r8152 3-1:1.0: read type=0x0133, index=0xb414 fail -71 [ 411.161675] r8152 3-1:1.0: read type=0x01cc, index=0xb400 fail -71


### Output of ``lsusb`` command
|__usb1          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (ehci_hcd 0000:00:16.0) hub
  |__1-1         8087:07db:0002 09  2.00  480MBit/s 0mA 1IF  ( ffffffd1ffffffb2ffffffdbffffffad) hub
    |__1-1.1     f400:f400:0100 00  2.00  480MBit/s 200mA 1IF  (Synology DiskStation 65004AF1D1B76D43)
|__usb2          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0000:04:00.0) hub
|__usb3          1d6b:0003:0310 09  3.00 5000MBit/s 0mA 1IF  (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0000:04:00.0) hub
  |__3-1         0bda:8156:3104 00  3.20 5000MBit/s 256mA 1IF  (Realtek USB 10/100/1G/2.5G LAN 4013000001)

(paste output here)


### Output of ``ifconfig -a`` command
eth0      Link encap:Ethernet  HWaddr 00:11:32:3A:8A:79  
          UP BROADCAST SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth1      Link encap:Ethernet  HWaddr 00:11:32:3A:8A:7A  
          UP BROADCAST SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth2      Link encap:Ethernet  HWaddr 6C:6E:07:09:09:3A  
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:1621275 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3416008 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1987831748 (1.8 GiB)  TX bytes:4630447456 (4.3 GiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:7749 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7749 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1706085 (1.6 MiB)  TX bytes:1706085 (1.6 MiB)

ovs-syste Link encap:Ethernet  HWaddr 0E:C4:59:62:6D:B4  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ovs_eth0  Link encap:Ethernet  HWaddr 00:11:32:3A:8A:79  
          inet addr:10.1.1.1  Bcast:10.1.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ovs_eth1  Link encap:Ethernet  HWaddr 00:11:32:3A:8A:7A  
          inet addr:169.254.199.75  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ovs_eth2  Link encap:Ethernet  HWaddr 6C:6E:07:09:09:3A  
          inet addr:10.1.1.1  Bcast:10.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::6e6e:7ff:fe09:93a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:694806 errors:0 dropped:0 overruns:0 frame:0
          TX packets:460009 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1931583764 (1.7 GiB)  TX bytes:4438698334 (4.1 GiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Jun 13 '25 14:06 sspeed22

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.108 (root@build3) (gcc version 8.5.0 (GCC) ) #42962 SMP Mon Aug 19 15:12:09 CST 2024 [ 0.000000] Command line: root=/dev/md0 ihd_num=4 netif_num=2 HddHotplug=1 pwrctl_pin=N0754 SataPortMap=422 DiskIdxMap=020006 syno_hw_version=DS415+ macs=0011323a8a79,0011323a8a7a,0011323a8a7b,0011323a8a7c sn=14B1MIN431200 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000087000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ea9efff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ea9f000-0x000000007f3befff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f3bf000-0x000000007f7befff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f7bf000-0x000000007f7fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f7ff000-0x000000007f7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec80000-0x00000000fecfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] e820: update [mem 0x01d87020-0x01d8702f] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000086fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000087000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001d8701f] usable [ 0.000000] reserve setup_data: [mem 0x0000000001d87020-0x0000000001d8702f] usable [ 0.000000] reserve setup_data: [mem 0x0000000001d87030-0x000000007ea9efff] usable [ 0.000000] reserve setup_data: [mem 0x000000007ea9f000-0x000000007f3befff] reserved [ 0.000000] reserve setup_data: [mem 0x000000007f3bf000-0x000000007f7befff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000007f7bf000-0x000000007f7fefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000007f7ff000-0x000000007f7fffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec80000-0x00000000fecfffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fef00000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by INSYDE Corp. [ 0.000000] efi: SMBIOS=0x7ed06000 ACPI 2.0=0x7f7fe014 [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000085000) (0MB) [ 0.000000] efi: mem02: type=2, attr=0xf, range=[0x0000000000085000-0x0000000000087000) (0MB) [ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x0000000000087000-0x0000000000088000) (0MB) [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x00000000768a0000) (1895MB) [ 0.000000] efi: mem06: type=4, attr=0xf, range=[0x00000000768a0000-0x00000000768c0000) (0MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x00000000768c0000-0x0000000078205000) (25MB) [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000078205000-0x0000000078bb8000) (9MB) [ 0.000000] efi: mem09: type=4, attr=0xf, range=[0x0000000078bb8000-0x000000007989c000) (12MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000007989c000-0x000000007989f000) (0MB) [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x000000007989f000-0x0000000079a6a000) (1MB) [ 0.000000] efi: mem12: type=1, attr=0xf, range=[0x0000000079a6a000-0x0000000079a9f000) (0MB) [ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x0000000079a9f000-0x000000007bb4b000) (32MB) [ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x000000007bb4b000-0x000000007bb4c000) (0MB) [ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x000000007bb4c000-0x000000007bb5f000) (0MB) [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000007bb5f000-0x000000007bb63000) (0MB) [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000007bb63000-0x000000007bb7d000) (0MB) [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x000000007bb7d000-0x000000007bb87000) (0MB) [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x000000007bb87000-0x000000007bbfd000) (0MB) [ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x000000007bbfd000-0x000000007bc5d000) (0MB) [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x000000007bc5d000-0x000000007bc6a000) (0MB) [ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x000000007bc6a000-0x000000007c5eb000) (9MB) [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x000000007c5eb000-0x000000007c5f2000) (0MB) [ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x000000007c5f2000-0x000000007c5f3000) (0MB) [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x000000007c5f3000-0x000000007c5f9000) (0MB) [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000007c5f9000-0x000000007c5fa000) (0MB) [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x000000007c5fa000-0x000000007c61e000) (0MB) [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000007c61e000-0x000000007c61f000) (0MB) [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x000000007c61f000-0x000000007c62c000) (0MB) [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x000000007c62c000-0x000000007c633000) (0MB) [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x000000007c633000-0x000000007c634000) (0MB) [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x000000007c634000-0x000000007da9f000) (20MB) [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x000000007da9f000-0x000000007e1e6000) (7MB) [ 0.000000] efi: mem34: type=2, attr=0xf, range=[0x000000007e1e6000-0x000000007e71e000) (5MB) [ 0.000000] efi: mem35: type=3, attr=0xf, range=[0x000000007e71e000-0x000000007ea9f000) (3MB) [ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x000000007ea9f000-0x000000007ec9f000) (2MB) [ 0.000000] efi: mem37: type=6, attr=0x800000000000000f, range=[0x000000007ec9f000-0x000000007ef9f000) (3MB) [ 0.000000] efi: mem38: type=0, attr=0xf, range=[0x000000007ef9f000-0x000000007f3bf000) (4MB) [ 0.000000] efi: mem39: type=10, attr=0xf, range=[0x000000007f3bf000-0x000000007f7bf000) (4MB) [ 0.000000] efi: mem40: type=9, attr=0xf, range=[0x000000007f7bf000-0x000000007f7ff000) (0MB) [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x000000007f7ff000-0x000000007f800000) (0MB) [ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000100000000-0x0000000280000000) (6144MB) [ 0.000000] efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB) [ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000fec80000-0x00000000fed00000) (0MB) [ 0.000000] efi: mem45: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB) [ 0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fed03000-0x00000000fed04000) (0MB) [ 0.000000] efi: mem47: type=11, attr=0x8000000000000001, range=[0x00000000fed08000-0x00000000fed09000) (0MB) [ 0.000000] efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000fed0c000-0x00000000fed10000) (0MB) [ 0.000000] efi: mem49: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed1d000) (0MB) [ 0.000000] efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x00000000ff000000) (1MB) [ 0.000000] efi: mem51: type=11, attr=0x8000000000000000, range=[0x00000000ffa00000-0x0000000100000000) (6MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Insyde MohonPeak/Type2 - Board Product Name1, BIOS M.012 2017/05/09 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF000000 mask FFF000000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask F80000000 write-back [ 0.000000] 4 base 07F800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000081000] 81000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a3a000, 0x01a3afff] PGTABLE [ 0.000000] BRK [0x01a3b000, 0x01a3bfff] PGTABLE [ 0.000000] BRK [0x01a3c000, 0x01a3cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x27fe00000-0x27fffffff] [ 0.000000] [mem 0x27fe00000-0x27fffffff] page 2M [ 0.000000] BRK [0x01a3d000, 0x01a3dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x27c000000-0x27fdfffff] [ 0.000000] [mem 0x27c000000-0x27fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x27bffffff] [ 0.000000] [mem 0x200000000-0x27bffffff] page 2M [ 0.000000] BRK [0x01a3e000, 0x01a3efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7ea9efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7e9fffff] page 2M [ 0.000000] [mem 0x7ea00000-0x7ea9efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x7f7ff000-0x7f7fffff] [ 0.000000] [mem 0x7f7ff000-0x7f7fffff] page 4k [ 0.000000] BRK [0x01a3f000, 0x01a3ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x7e1e6000-0x7e71dfff] [ 0.000000] ACPI: RSDP 0x000000007F7FE014 00024 (v02 INSYDE) [ 0.000000] ACPI: XSDT 0x000000007F7FE120 0009C (v01 INSYDE MOHOPEAK 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000007F7F9000 0010C (v05 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x000000007F7F2000 02D87 (v02 INSYDE MOHOPEAK 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000007F7BC000 00040 [ 0.000000] ACPI: UEFI 0x000000007F7FD000 00236 (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x000000007F7FC000 00042 (v01 INSYDE MOHOPEAK 00000000 ACPI 00040000) [ 0.000000] ACPI: BDAT 0x000000007F7FB000 00030 (v01 INSYDE MOHOPEAK 00000000 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x000000007F7FA000 00028 (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 0x000000007F7F8000 00038 (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000007F7F7000 00092 (v03 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x000000007F7F6000 0003C (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: WDAT 0x000000007F7F5000 001C4 (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007F7F0000 009F1 (v01 INSYDE MOHOPEAK 00003000 ACPI 00040000) [ 0.000000] ACPI: HEST 0x000000007F7EF000 000A8 (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: ERST 0x000000007F7EE000 00230 (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: BERT 0x000000007F7ED000 00030 (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: EINJ 0x000000007F7EC000 00150 (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x000000007F7EB000 00038 (v01 INSYDE MOHOPEAK 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880277600000-ffff88027e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x27fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00086fff] [ 0.000000] node 0: [mem 0x00100000-0x7ea9efff] [ 0.000000] node 0: [mem 0x7f7ff000-0x7f7fffff] [ 0.000000] node 0: [mem 0x100000000-0x27fffffff] [ 0.000000] On node 0 totalpages: 2091558 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3974 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7038 pages used for memmap [ 0.000000] DMA32 zone: 514720 pages, LIFO batch:31 [ 0.000000] Normal zone: 21504 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000087000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000001d87000 - 0000000001d88000 [ 0.000000] PM: Registered nosave memory: 0000000001d87000 - 0000000001d88000 [ 0.000000] PM: Registered nosave memory: 000000007ea9f000 - 000000007f3bf000 [ 0.000000] PM: Registered nosave memory: 000000007f3bf000 - 000000007f7bf000 [ 0.000000] PM: Registered nosave memory: 000000007f7bf000 - 000000007f7ff000 [ 0.000000] PM: Registered nosave memory: 000000007f800000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec80000 [ 0.000000] PM: Registered nosave memory: 00000000fec80000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000 [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed02000 [ 0.000000] PM: Registered nosave memory: 00000000fed02000 - 00000000fed03000 [ 0.000000] PM: Registered nosave memory: 00000000fed03000 - 00000000fed04000 [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed0c000 [ 0.000000] PM: Registered nosave memory: 00000000fed0c000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed1d000 [ 0.000000] PM: Registered nosave memory: 00000000fed1d000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000ffa00000 [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000 [ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88027fc00000 s80704 r8192 d21696 u262144 [ 0.000000] pcpu-alloc: s80704 r8192 d21696 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062939 [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=4 netif_num=2 HddHotplug=1 pwrctl_pin=N0754 SataPortMap=422 DiskIdxMap=020006 syno_hw_version=DS415+ macs=0011323a8a79,0011323a8a7a,0011323a8a7b,0011323a8a7c sn=14B1MIN431200 [ 0.000000] Internal HD num: 4 [ 0.000000] Internal netif num: 2 [ 0.000000] Support HDD Hotplug. [ 0.000000] Get sata id 7 pwrctl pin 54 [ 0.000000] Sata Port Map: 422 [ 0.000000] Disk Index Map: 020006 [ 0.000000] Synology Hardware Version: DS415+-j [ 0.000000] Serial Number: 14B1MIN431200 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8108184k/10485760k available (4729k kernel code, 2119528k absent, 258048k reserved, 4111k data, 804k init) [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2394.002 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.00 BogoMIPS (lpj=2394002) [ 0.011919] pid_max: default: 32768 minimum: 301 [ 0.017121] init_memory_mapping: [mem 0x7ea9f000-0x7ec9efff] [ 0.023470] [mem 0x7ea9f000-0x7ec9efff] page 4k [ 0.023488] init_memory_mapping: [mem 0x7ec9f000-0x7ef9efff] [ 0.029836] [mem 0x7ec9f000-0x7ef9efff] page 4k [ 0.031001] Security Framework initialized [ 0.035619] AppArmor: AppArmor initialized [ 0.040227] Mount-cache hash table entries: 256 [ 0.045521] Initializing cgroup subsys memory [ 0.050421] Initializing cgroup subsys devices [ 0.055406] Initializing cgroup subsys freezer [ 0.060389] Initializing cgroup subsys blkio [ 0.065200] CPU: Physical Processor ID: 0 [ 0.069698] CPU: Processor Core ID: 0 [ 0.077608] mce: CPU supports 6 MCE banks [ 0.082110] CPU0: Thermal monitoring handled by SMI [ 0.082118] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0 tlb_flushall_shift: 6 [ 0.097916] FEATURE SPEC_CTRL Not Present [ 0.102411] FEATURE IBPB_SUPPORT Not Present [ 0.107200] Spectre V2 : Vulnerable [ 0.111202] Freeing SMP alternatives: 20k freed [ 0.116290] ACPI: Core revision 20130328 [ 0.123508] ACPI: All ACPI Tables successfully acquired [ 0.132192] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.148940] smpboot: CPU0: Intel(R) Atom(TM) CPU C2538 @ 2.40GHz (fam: 06, model: 4d, stepping: 08) [ 0.159309] TSC deadline timer enabled [ 0.159325] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. [ 0.168909] ... version: 3 [ 0.173399] ... bit width: 40 [ 0.177987] ... generic registers: 2 [ 0.182477] ... value mask: 000000ffffffffff [ 0.188427] ... max period: 000000007fffffff [ 0.194378] ... fixed-purpose events: 3 [ 0.198867] ... event mask: 0000000700000003 [ 0.227043] CPU1: Thermal monitoring handled by SMI [ 0.244404] CPU2: Thermal monitoring handled by SMI [ 0.261802] CPU3: Thermal monitoring handled by SMI [ 0.206754] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.263959] Brought up 4 CPUs [ 0.267482] smpboot: Total of 4 processors activated (19152.01 BogoMIPS) [ 0.275450] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.284785] devtmpfs: initialized [ 0.288760] PM: Registering ACPI NVS region [mem 0x7f3bf000-0x7f7befff] (4194304 bytes) [ 0.299502] NET: Registered protocol family 16 [ 0.305104] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.313596] ACPI: bus type PCI registered [ 0.318219] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.328660] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.336590] PCI: Using configuration type 1 for base access [ 0.349034] bio: create slab at 0 [ 0.353785] ACPI: Added _OSI(Module Device) [ 0.358469] ACPI: Added _OSI(Processor Device) [ 0.363449] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.368720] ACPI: Added _OSI(Processor Aggregator Device) [ 0.375712] ACPI: EC: Look up EC in DSDT [ 0.376631] ACPI: Executed 1 blocks of module-level executable AML code [ 0.385436] [Firmware Bug]: ACPI: BIOS OSI(Linux) query ignored [ 0.392802] ACPI: SSDT 0x000000007F339918 0044E (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.402508] ACPI: Dynamic OEM Table Load: [ 0.407014] ACPI: SSDT 0x0000000000000000 0044E (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.416607] ACPI: SSDT 0x000000007F339D98 001FA (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.426319] ACPI: Dynamic OEM Table Load: [ 0.430825] ACPI: SSDT 0x0000000000000000 001FA (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.444561] ACPI: SSDT 0x000000007F33BA18 0047A (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.454372] ACPI: Dynamic OEM Table Load: [ 0.458875] ACPI: SSDT 0x0000000000000000 0047A (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.471279] ACPI: SSDT 0x000000007F33AD98 00119 (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.481015] ACPI: Dynamic OEM Table Load: [ 0.485519] ACPI: SSDT 0x0000000000000000 00119 (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.500654] ACPI: Interpreter enabled [ 0.504764] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S4] (20130328/hwxface-568) [ 0.515126] ACPI: (supports S0 S5) [ 0.518935] ACPI: Using IOAPIC for interrupt routing [ 0.524594] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.534909] ACPI: No dock devices found. [ 0.545796] ACPI: Power Resource [FN00] (off) [ 0.551343] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.558575] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.565753] acpi PNP0A08:00: ACPI OSC control (0x10) granted [ 0.572531] PCI host bridge to bus 0000:00 [ 0.577126] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.583268] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.590196] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.597123] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.604831] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] [ 0.612537] pci_bus 0000:00: root bus resource [mem 0x280000000-0xfffffffff] [ 0.620448] pci 0000:00:00.0: [8086:1f0c] type 00 class 0x060000 [ 0.620600] pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400 [ 0.620620] pci 0000:00:01.0: reg 10: [mem 0x80200000-0x8021ffff 64bit] [ 0.620668] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.620733] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.627168] pci 0000:00:02.0: [8086:1f11] type 01 class 0x060400 [ 0.627188] pci 0000:00:02.0: reg 10: [mem 0x80220000-0x8023ffff 64bit] [ 0.627237] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.627301] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.633735] pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400 [ 0.633755] pci 0000:00:03.0: reg 10: [mem 0x80240000-0x8025ffff 64bit] [ 0.633804] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.633865] pci 0000:00:03.0: System wakeup disabled by ACPI [ 0.640317] pci 0000:00:04.0: [8086:1f13] type 01 class 0x060400 [ 0.640336] pci 0000:00:04.0: reg 10: [mem 0x80260000-0x8027ffff 64bit] [ 0.640384] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.640444] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.646888] pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000 [ 0.647038] pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600 [ 0.647096] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold [ 0.647229] pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000 [ 0.647249] pci 0000:00:13.0: reg 10: [mem 0x802ca000-0x802ca3ff 64bit] [ 0.647454] pci 0000:00:14.0: [8086:1f41] type 00 class 0x020000 [ 0.647472] pci 0000:00:14.0: reg 10: [mem 0x80280000-0x8029ffff 64bit] [ 0.647483] pci 0000:00:14.0: reg 18: [io 0x2080-0x209f] [ 0.647503] pci 0000:00:14.0: reg 20: [mem 0x802c0000-0x802c3fff 64bit] [ 0.647553] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold [ 0.647621] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.654055] pci 0000:00:14.1: [8086:1f41] type 00 class 0x020000 [ 0.654073] pci 0000:00:14.1: reg 10: [mem 0x802a0000-0x802bffff 64bit] [ 0.654083] pci 0000:00:14.1: reg 18: [io 0x2060-0x207f] [ 0.654103] pci 0000:00:14.1: reg 20: [mem 0x802c4000-0x802c7fff 64bit] [ 0.654153] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold [ 0.654218] pci 0000:00:14.1: System wakeup disabled by ACPI [ 0.660678] pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320 [ 0.660704] pci 0000:00:16.0: reg 10: [mem 0x802cb000-0x802cb3ff] [ 0.660808] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.660871] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.667300] pci 0000:00:17.0: [8086:1f22] type 00 class 0x010601 [ 0.667320] pci 0000:00:17.0: reg 10: [io 0x20b8-0x20bf] [ 0.667330] pci 0000:00:17.0: reg 14: [io 0x20cc-0x20cf] [ 0.667339] pci 0000:00:17.0: reg 18: [io 0x20b0-0x20b7] [ 0.667348] pci 0000:00:17.0: reg 1c: [io 0x20c8-0x20cb] [ 0.667357] pci 0000:00:17.0: reg 20: [io 0x2040-0x205f] [ 0.667367] pci 0000:00:17.0: reg 24: [mem 0x802c9000-0x802c97ff] [ 0.667408] pci 0000:00:17.0: PME# supported from D3hot [ 0.667543] pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601 [ 0.667563] pci 0000:00:18.0: reg 10: [io 0x20a8-0x20af] [ 0.667573] pci 0000:00:18.0: reg 14: [io 0x20c4-0x20c7] [ 0.667582] pci 0000:00:18.0: reg 18: [io 0x20a0-0x20a7] [ 0.667591] pci 0000:00:18.0: reg 1c: [io 0x20c0-0x20c3] [ 0.667600] pci 0000:00:18.0: reg 20: [io 0x2020-0x203f] [ 0.667609] pci 0000:00:18.0: reg 24: [mem 0x802c8000-0x802c87ff] [ 0.667651] pci 0000:00:18.0: PME# supported from D3hot [ 0.667785] pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100 [ 0.667977] pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500 [ 0.667994] pci 0000:00:1f.3: reg 10: [mem 0x802cc000-0x802cc01f] [ 0.668027] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f] [ 0.668286] pci 0000:01:00.0: [1095:3132] type 00 class 0x010600 [ 0.668315] pci 0000:01:00.0: reg 10: [mem 0x80104000-0x8010407f 64bit] [ 0.668337] pci 0000:01:00.0: reg 18: [mem 0x80100000-0x80103fff 64bit] [ 0.668352] pci 0000:01:00.0: reg 20: [io 0x1000-0x107f] [ 0.668379] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.668446] pci 0000:01:00.0: supports D1 D2 [ 0.668488] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.676855] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.682425] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.682430] pci 0000:00:01.0: bridge window [mem 0x80100000-0x801fffff] [ 0.682528] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.688197] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.693877] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.693902] pci 0000:04:00.0: reg 10: [mem 0x80000000-0x80007fff 64bit] [ 0.694002] pci 0000:04:00.0: supports D1 D2 [ 0.694005] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot [ 0.694046] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.702414] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.707990] pci 0000:00:04.0: bridge window [mem 0x80000000-0x800fffff] [ 0.708016] pci_bus 0000:00: on NUMA node 0 [ 0.708019] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.716418] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.725563] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.734697] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.743837] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.752972] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.762106] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.771239] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.780383] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.788629] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.794058] acpi root: _SB.PCI0 notify handler is installed [ 0.794091] Found 1 acpi root devices [ 0.794452] vgaarb: loaded [ 0.797722] SCSI subsystem initialized [ 0.801926] ACPI: bus type ATA registered [ 0.806595] libata version 3.00 loaded. [ 0.806780] pps_core: LinuxPPS API ver. 1 registered [ 0.812348] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected] [ 0.822638] PTP clock support registered [ 0.827223] EFI Variables Facility v0.08 2004-May-17 [ 0.850480] Registered efi as persistent store backend [ 0.856248] PCI: Using ACPI for IRQ routing [ 0.865158] PCI: pci_cache_line_size set to 64 bytes [ 0.865209] e820: reserve RAM buffer [mem 0x00087000-0x0008ffff] [ 0.865216] e820: reserve RAM buffer [mem 0x01d87020-0x03ffffff] [ 0.865219] e820: reserve RAM buffer [mem 0x7ea9f000-0x7fffffff] [ 0.865222] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff] [ 0.865590] Switching to clocksource hpet [ 0.878512] AppArmor: AppArmor Filesystem Enabled [ 0.883917] pnp: PnP ACPI init [ 0.887357] ACPI: bus type PNP registered [ 0.891978] pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active) [ 0.892229] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.899653] system 00:01: [mem 0x7f800000-0x7fffffff] could not be reserved [ 0.907463] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.907590] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.914234] system 00:02: [io 0x0500-0x05fe] has been reserved [ 0.920874] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.927508] system 00:02: [mem 0xfed00000-0xfedfffff] could not be reserved [ 0.935317] system 00:02: [mem 0x000c0000-0x000dffff] has been reserved [ 0.942736] system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.950545] system 00:02: [mem 0xffa00000-0xffffffff] has been reserved [ 0.957957] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.958061] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.958198] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.958320] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.958563] pnp: PnP ACPI: found 6 devices [ 0.963159] ACPI: bus type PNP unregistered [ 0.980377] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.990080] pci 0000:00:01.0: BAR 15: assigned [mem 0x80300000-0x803fffff pref] [ 0.998281] pci 0000:01:00.0: BAR 6: assigned [mem 0x80300000-0x8037ffff pref] [ 1.006382] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.011943] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 1.018781] pci 0000:00:01.0: bridge window [mem 0x80100000-0x801fffff] [ 1.026396] pci 0000:00:01.0: bridge window [mem 0x80300000-0x803fffff pref] [ 1.034503] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.040081] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.045659] pci 0000:00:04.0: PCI bridge to [bus 04] [ 1.051231] pci 0000:00:04.0: bridge window [mem 0x80000000-0x800fffff] [ 1.059120] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.059124] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.059128] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.059131] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff] [ 1.059134] pci_bus 0000:00: resource 8 [mem 0x280000000-0xfffffffff] [ 1.059137] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 1.059141] pci_bus 0000:01: resource 1 [mem 0x80100000-0x801fffff] [ 1.059144] pci_bus 0000:01: resource 2 [mem 0x80300000-0x803fffff pref] [ 1.059147] pci_bus 0000:04: resource 1 [mem 0x80000000-0x800fffff] [ 1.059232] NET: Registered protocol family 2 [ 1.064418] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.072901] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.080791] TCP: Hash tables configured (established 65536 bind 65536) [ 1.088200] TCP: reno registered [ 1.091834] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.098724] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.106195] NET: Registered protocol family 1 [ 1.121440] PCI: CLS 64 bytes, default 64 [ 1.393596] Trying to unpack rootfs image as initramfs... [ 2.867798] decompress cpio completed and skip redundant lzma [ 2.874484] Freeing initrd memory: 5344k freed [ 2.881553] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.888799] software IO TLB [mem 0x728a0000-0x768a0000] (64MB) mapped at [ffff8800728a0000-ffff88007689ffff] [ 2.899872] Simple Boot Flag at 0x44 set to 0x1 [ 2.919757] Initialise module verification [ 2.924454] audit: initializing netlink socket (disabled) [ 2.930556] type=2000 audit(1749821647.454:1): initialized [ 2.956468] bounce pool size: 64 pages [ 2.961499] VFS: Disk quotas dquot_6.5.2 [ 2.965962] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.973443] msgmni has been set to 15940 [ 2.978242] Key type asymmetric registered [ 2.982843] Asymmetric key parser 'x509' registered [ 2.988509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.996824] io scheduler noop registered [ 3.001237] io scheduler deadline registered [ 3.006055] io scheduler cfq registered (default) [ 3.771834] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.799540] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.826836] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.906970] brd: module loaded [ 3.907929] tsc: Refined TSC clocksource calibration: 2393.903 MHz [ 3.907934] Switching to clocksource tsc [ 3.929453] Loading iSCSI transport class v2.0-870. [ 3.956586] ahci 0000:00:17.0: version 3.0 [ 3.956751] ahci 0000:00:17.0: irq 40 for MSI/MSI-X [ 3.966944] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 3.976030] ahci 0000:00:17.0: flags: 64bit ncq led clo pio deso sadm sds apst [ 3.984232] ahci 0000:00:17.0: setting latency timer to 64 [ 3.997873] scsi0 : ahci [ 4.002616] scsi1 : ahci [ 4.005958] scsi2 : ahci [ 4.009564] scsi3 : ahci [ 4.013260] ata1: SATA max UDMA/133 abar m2048@0x802c9000 port 0x802c9100 irq 40 [ 4.021579] ata2: SATA max UDMA/133 abar m2048@0x802c9000 port 0x802c9180 irq 40 [ 4.029878] ata3: SATA max UDMA/133 abar m2048@0x802c9000 port 0x802c9200 irq 40 [ 4.038174] ata4: SATA max UDMA/133 abar m2048@0x802c9000 port 0x802c9280 irq 40 [ 7.352874] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.363928] ata1.00: supports DRM functions and may not be fully accessible [ 7.371939] ata1.00: ATA-10: Crucial_CT2050MX300SSD1, M0CR070, max UDMA/133 [ 7.379856] ata1.00: 4004704368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 7.387955] ata1.00: SN: 171816E65C6F [ 7.420153] ata1.00: supports DRM functions and may not be fully accessible [ 7.439628] ata1.00: configured for UDMA/133 [ 7.444436] ata1.00: Find SSD disks. [Crucial_CT2050MX300SSD1] [ 7.455431] scsi 0:0:0:0: Direct-Access Crucial CT2050MX300SSD1 n/a PQ: 0 ANSI: 5 [ 7.465875] sd 0:0:0:0: [sdc] 4004704368 512-byte logical blocks: (2.05 TB/1.86 TiB) [ 7.468132] Delay 5 seconds to wait for disk 4 ready. [ 7.480357] sd 0:0:0:0: [sdc] Write Protect is off [ 7.485727] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 7.485767] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.104908] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 > [ 9.114038] sd 0:0:0:0: [sdc] Attached SCSI disk [ 20.830634] ata2: link is slow to respond, please be patient (ready=0) [ 22.929850] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 23.119895] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 23.127438] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 23.135441] ata2.00: SN: WD-WCC4N6HX5XAC [ 23.140805] ata2.00: configured for UDMA/133 [ 23.146163] scsi 1:0:0:0: Direct-Access WDC WD30EFRX-68EUZN0 82.0 PQ: 0 ANSI: 5 [ 23.156634] sd 1:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 23.165347] sd 1:0:0:0: [sdd] 4096-byte physical blocks [ 23.171399] sd 1:0:0:0: [sdd] Write Protect is off [ 23.176785] sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 23.176834] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.254495] sdd: sdd1 sdd2 sdd5 sdd6 sdd7 [ 23.261191] sd 1:0:0:0: [sdd] Attached SCSI disk [ 23.465157] ata3: SATA link down (SStatus 0 SControl 300) [ 23.471216] ata3: No present pin info for SATA link down event [ 23.786338] ata4: SATA link down (SStatus 0 SControl 300) [ 23.792394] ata4: No present pin info for SATA link down event [ 23.800546] ahci 0000:00:18.0: irq 41 for MSI/MSI-X [ 23.811369] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 23.820448] ahci 0000:00:18.0: flags: 64bit ncq led clo pio deso sadm sds apst [ 23.828646] ahci 0000:00:18.0: setting latency timer to 64 [ 23.831435] scsi4 : ahci [ 23.838492] scsi5 : ahci [ 23.841650] ata5: SATA max UDMA/133 abar m2048@0x802c8000 port 0x802c8100 irq 41 [ 23.849980] ata6: SATA max UDMA/133 abar m2048@0x802c8000 port 0x802c8180 irq 41 [ 23.858284] Delay 5 seconds to wait for disk 1 ready. [ 37.226083] ata5: link is slow to respond, please be patient (ready=0) [ 41.876759] ata5: COMRESET failed (errno=-16) [ 41.881644] ata5: COMRESET fail, set COMRESET fail flag [ 44.388214] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 44.395147] ata5: link reset sucessfully clear error flags [ 44.402800] ata5.00: applying link speed limit horkage to 1.5 Gbps [ 46.702547] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 46.711514] ata5.00: ATA-8: Hitachi HDS723030ALA640, MKAOA580, max UDMA/133 [ 46.719331] ata5.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 46.727332] ata5.00: SN: MK0311YHGJLK8A [ 46.734225] ata5.00: configured for UDMA/133 [ 46.740963] scsi 4:0:0:0: Direct-Access Hitachi HDS723030ALA640 MKAO PQ: 0 ANSI: 5 [ 46.751433] sd 4:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 46.752497] Delay 5 seconds to wait for disk 2 ready. [ 46.765886] sd 4:0:0:0: [sda] Write Protect is off [ 46.771264] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 46.771305] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.824471] sda: sda1 sda2 sda5 sda6 sda7 [ 46.832238] sd 4:0:0:0: [sda] Attached SCSI disk [ 60.114270] ata6: link is slow to respond, please be patient (ready=0) [ 63.540252] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 63.689959] ata6.00: ATA-9: WDC WD40EFRX-68WT0N0, 80.00A80, max UDMA/133 [ 63.697495] ata6.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 63.705496] ata6.00: SN: WD-WCC4E1298700 [ 63.710873] ata6.00: configured for UDMA/133 [ 63.716262] scsi 5:0:0:0: Direct-Access WDC WD40EFRX-68WT0N0 80.0 PQ: 0 ANSI: 5 [ 63.726782] sd 5:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 63.730836] sata_sil24 0000:01:00.0: version 1.1 [ 63.730971] sata_sil24 0000:01:00.0: Increase sil3132 swing to 0xf [ 63.742407] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 63.748409] sd 5:0:0:0: [sdb] Write Protect is off [ 63.753786] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 63.753836] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 63.832602] sdb: sdb1 sdb2 sdb5 sdb6 sdb7 sdb8 [ 63.843198] sd 5:0:0:0: [sdb] Attached SCSI disk [ 64.731671] sata_sil24 0000:01:00.0: Increase sil3132 swing to 0xf [ 65.743278] scsi6 : sata_sil24 [ 65.748917] scsi7 : sata_sil24 [ 65.752717] ata7: SATA max UDMA/100 host m128@0x80104000 port 0x80100000 irq 16 [ 65.760932] ata8: SATA max UDMA/100 host m128@0x80104000 port 0x80102000 irq 16 [ 67.789712] ata7: SATA link down (SStatus 0 SControl 0) [ 67.795577] ata7: No present pin info for SATA link down event [ 69.822881] ata8: SATA link down (SStatus 0 SControl 0) [ 69.828742] ata8: No present pin info for SATA link down event [ 69.835763] rtc_cmos 00:03: RTC can wake from S4 [ 69.841409] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 69.848279] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs [ 69.856518] i2c /dev entries driver [ 69.864109] md: raid1 personality registered for level 1 [ 69.870088] cpuidle: using governor ladder [ 69.874686] cpuidle: using governor menu [ 69.879219] TCP: cubic registered [ 69.882937] NET: Registered protocol family 17 [ 69.887945] Key type dns_resolver registered [ 69.900165] Loading module verification blacklist certificates [ 69.906719] Loading module verification certificates [ 69.912323] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 69.925544] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 69.937187] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 69.950472] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 69.961811] registered taskstats version 1 [ 69.966787] rtc_cmos 00:03: setting system clock to 2025-06-13 13:35:16 UTC (1749821716) [ 69.977184] Freeing unused kernel memory: 804k freed [ 69.982963] Write protecting the kernel read-only data: 8192k [ 69.989591] Freeing unused kernel memory: 1404k freed [ 69.997488] Freeing unused kernel memory: 552k freed [ 70.118079] ACPI: bus type USB registered [ 70.122881] usbcore: registered new interface driver usbfs [ 70.129214] usbcore: registered new interface driver hub [ 70.135343] usbcore: registered new interface driver ethub [ 70.141688] usbcore: registered new device driver usb [ 70.162177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 70.176366] ehci-pci: EHCI PCI platform driver [ 70.182245] ehci-pci 0000:00:16.0: setting latency timer to 64 [ 70.182258] ehci-pci 0000:00:16.0: EHCI Host Controller [ 70.188151] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1 [ 70.196458] ehci-pci 0000:00:16.0: debug port 2 [ 70.205459] ehci-pci 0000:00:16.0: cache line size of 64 is not supported [ 70.205485] ehci-pci 0000:00:16.0: irq 23, io mem 0x802cb000 [ 70.217084] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00 [ 70.223964] hub 1-0:1.0: USB hub found [ 70.228174] hub 1-0:1.0: 8 ports detected [ 70.244712] uhci_hcd: USB Universal Host Controller Interface driver [ 70.283102] etxhci_hcd-170202 0000:04:00.0: Etron xHCI Host Controller [ 70.290447] etxhci_hcd-170202 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 70.311875] etxhci_hcd-170202 0000:04:00.0: irq 42 for MSI/MSI-X [ 70.312703] xHCI etxhci_add_endpoint called for root hub [ 70.312707] xHCI etxhci_check_bandwidth called for root hub [ 70.312876] ethub 2-0:1.0: USB hub found [ 70.317297] ethub 2-0:1.0: 2 ports detected [ 70.322101] etxhci_hcd-170202 0000:04:00.0: Etron xHCI Host Controller [ 70.329433] etxhci_hcd-170202 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 70.339406] xHCI etxhci_add_endpoint called for root hub [ 70.339410] xHCI etxhci_check_bandwidth called for root hub [ 70.339582] ethub 3-0:1.0: USB hub found [ 70.344005] ethub 3-0:1.0: 2 ports detected [ 70.363202] synobios open /dev/ttyS1 success [ 70.368089] 2025-6-13 13:35:17 UTC [ 70.371907] synobios: load, major number 201 [ 70.376698] Brand: Synology [ 70.379828] Model: DS-415+ [ 70.382859] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 70.392338] synobios cpu_arch proc entry initialized [ 70.397905] synobios crypto_hw proc entry initialized [ 70.403568] synobios syno_platform proc entry initialized [ 70.417210] Module [avoton_synobios] is removed. [ 70.423298] synobios: unload [ 70.562328] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 70.653478] md: md0 stopped. [ 70.658651] md: bind [ 70.661915] md: bind [ 70.665207] md: bind [ 70.668448] md: bind [ 70.671763] md/raid1:md0: active with 4 out of 4 mirrors [ 70.700146] md0: detected capacity change from 0 to 2549940224 [ 70.704661] Got empty serial number. Generate serial number from product. [ 70.705201] hub 1-1:1.0: USB hub found [ 70.705287] hub 1-1:1.0: 4 ports detected [ 70.723538] md0: unknown partition table [ 70.935333] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) [ 70.945280] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) [ 70.995588] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 71.011681] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 72.502645] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) [ 72.512598] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) [ 72.542599] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 72.700838] loop: module loaded [ 72.769077] EXT3-fs (loop0): error: couldn't mount because of unsupported optional features (2c0) [ 72.779165] EXT2-fs (loop0): error: couldn't mount because of unsupported optional features (2c0) [ 72.807170] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 72.839825] usb 3-1: new SuperSpeed USB device number 2 using etxhci_hcd-170202 [ 77.394227] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) [ 77.404166] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0) [ 77.430040] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 77.917732] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0) [ 77.947025] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 78.404089] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 78.424514] systemd[1]: Detected architecture x86-64. [ 78.445646] systemd[1]: Set hostname to . [ 80.619382] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. [ 80.639592] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. [ 80.659529] systemd[1]: Cannot add dependency job for unit pkgctl-dsm6-ui-compatible.service, ignoring: Unit pkgctl-dsm6-ui-compatible.service failed to load: No such file or directory. [ 80.678122] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked. [ 80.694540] systemd[1]: Reached target Swap. [ 80.700892] systemd[1]: Starting Swap. [ 80.706653] systemd[1]: Reached target Paths. [ 80.712285] systemd[1]: Starting Paths. [ 80.718499] systemd[1]: Created slice Root Slice. [ 80.724977] systemd[1]: Starting Root Slice. [ 80.731457] systemd[1]: Created slice BTRFS Space Reclaim. [ 80.738994] systemd[1]: Starting BTRFS Space Reclaim. [ 80.746367] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape.. [ 80.757718] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape.. [ 80.768853] systemd[1]: Created slice Synology Swap Works. [ 80.776419] systemd[1]: Starting Synology Swap Works. [ 80.783761] systemd[1]: Created slice SecureSignIn's slice. [ 80.791426] systemd[1]: Starting SecureSignIn's slice. [ 80.798859] systemd[1]: Created slice LogCenter's slice. [ 80.806240] systemd[1]: Starting LogCenter's slice. [ 80.813415] systemd[1]: Created slice User and Session Slice. [ 80.821269] systemd[1]: Starting User and Session Slice. [ 80.828897] systemd[1]: Created slice user-196791.slice. [ 80.836268] systemd[1]: Starting user-196791.slice. [ 80.843415] systemd[1]: Created slice Apple Filing Protocol Daemon. [ 80.851865] systemd[1]: Starting Apple Filing Protocol Daemon. [ 80.860095] systemd[1]: Created slice OpenBSD Secure Shell server. [ 80.868433] systemd[1]: Starting OpenBSD Secure Shell server. [ 80.876563] systemd[1]: Created slice Node.js_v12's slice. [ 80.884131] systemd[1]: Starting Node.js_v12's slice. [ 80.891422] systemd[1]: Listening on Journal Audit Socket. [ 80.899177] systemd[1]: Created slice scemd. [ 80.905383] systemd[1]: Starting scemd. [ 80.911392] systemd[1]: Created slice DiagnosisTool's slice. [ 80.919132] systemd[1]: Starting DiagnosisTool's slice. [ 80.926671] systemd[1]: Created slice Python2's slice. [ 80.933870] systemd[1]: Starting Python2's slice. [ 80.940810] systemd[1]: Created slice Node.js_v18's slice. [ 80.948387] systemd[1]: Starting Node.js_v18's slice. [ 80.955734] systemd[1]: Created slice Synology Index slice (WAT). [ 80.963988] systemd[1]: Starting Synology Index slice (WAT). [ 80.972030] systemd[1]: Created slice SMBService's slice. [ 80.979491] systemd[1]: Starting SMBService's slice. [ 80.986730] systemd[1]: Created slice Synology DSM desktop service. [ 80.995181] systemd[1]: Starting Synology DSM desktop service. [ 81.003407] systemd[1]: Created slice DhcpServer's slice. [ 81.010900] systemd[1]: Starting DhcpServer's slice. [ 81.018128] systemd[1]: Created slice DNSServer's slice. [ 81.025501] systemd[1]: Starting DNSServer's slice. [ 81.032652] systemd[1]: Created slice Virtualization's slice. [ 81.040534] systemd[1]: Starting Virtualization's slice. [ 81.048157] systemd[1]: Created slice ActiveBackup's slice. [ 81.055818] systemd[1]: Starting ActiveBackup's slice. [ 81.063306] systemd[1]: Created slice System Slice. [ 81.070194] systemd[1]: Starting System Slice. [ 81.076905] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. [ 81.087600] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. [ 81.098262] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 81.106619] systemd[1]: Starting system-serial\x2dgetty.slice. [ 81.114726] systemd[1]: Reached target Slices. [ 81.121232] systemd[1]: Starting Slices. [ 81.127318] systemd[1]: Created slice Task Scheduler Group. [ 81.134986] systemd[1]: Starting Task Scheduler Group. [ 81.142451] systemd[1]: Created slice HybridShare's slice. [ 81.150003] systemd[1]: Starting HybridShare's slice. [ 81.157338] systemd[1]: Created slice SNMP. [ 81.163451] systemd[1]: Starting SNMP. [ 81.169338] systemd[1]: Created slice SynologyApplicationService's slice. [ 81.178367] systemd[1]: Starting SynologyApplicationService's slice. [ 81.187160] systemd[1]: Listening on udev Control Socket. [ 81.194650] systemd[1]: Starting udev Control Socket. [ 81.202002] systemd[1]: Created slice StorageAnalyzer's slice. [ 81.209958] systemd[1]: Starting StorageAnalyzer's slice. [ 81.217713] systemd[1]: Created slice HyperBackup's slice. [ 81.225344] systemd[1]: Starting HyperBackup's slice. [ 81.232639] systemd[1]: Created slice Shared Folder Sync. [ 81.240100] systemd[1]: Starting Shared Folder Sync. [ 81.247343] systemd[1]: Created slice HyperBackupVault's slice. [ 81.255418] systemd[1]: Starting HyperBackupVault's slice. [ 81.263240] systemd[1]: Created slice BTRFS Optimization. [ 81.270712] systemd[1]: Starting BTRFS Optimization. [ 81.277963] systemd[1]: Created slice CMS group. [ 81.284577] systemd[1]: Starting CMS group. [ 81.290938] systemd[1]: Created slice Synology DSM internal service. [ 81.299480] systemd[1]: Starting Synology DSM internal service. [ 81.307807] systemd[1]: Created slice AntiVirus's slice. [ 81.315166] systemd[1]: Starting AntiVirus's slice. [ 81.322340] systemd[1]: Created slice ReplicationService's slice. [ 81.330577] systemd[1]: Starting ReplicationService's slice. [ 81.338611] systemd[1]: Created slice SynoFinder's slice. [ 81.346080] systemd[1]: Starting SynoFinder's slice. [ 81.353326] systemd[1]: Created slice Synology Flashcache. [ 81.360894] systemd[1]: Starting Synology Flashcache. [ 81.368242] systemd[1]: Created slice WebDAVServer's slice. [ 81.375909] systemd[1]: Starting WebDAVServer's slice. [ 81.383355] systemd[1]: Created slice Performance alarm. [ 81.390751] systemd[1]: Starting Performance alarm. [ 81.397903] systemd[1]: Listening on Journal Socket. [ 81.404905] systemd[1]: Starting Journal Socket. [ 81.412575] systemd[1]: Starting Synology Task Scheduler Init... [ 81.421008] systemd[1]: Starting Load ntb_brd module... [ 81.428391] systemd[1]: Started Machine Check Exception Logging Daemon. [ 81.436334] systemd[1]: Starting Machine Check Exception Logging Daemon... [ 81.446500] systemd[1]: Starting Synology swap... [ 81.453436] systemd[1]: Starting Set time zone information to kernel... [ 81.462397] systemd[1]: Starting Set boot sequence config... [ 81.477783] systemd[1]: Mounting Temporary Directory... [ 81.485615] systemd[1]: Starting Disabling fan checking flag ...... [ 81.494145] systemd[1]: Starting Set hostname... [ 81.500959] systemd[1]: Starting check integrity of rd.gz decompression... [ 81.509141] systemd[1]: Started Set project quota ID for /var/log. [ 81.517804] systemd[1]: Created slice Synology DSM Storage Service. [ 81.526138] systemd[1]: Starting Synology DSM Storage Service. [ 81.534442] systemd[1]: Created slice Synology Cache Advisor. [ 81.542198] systemd[1]: Starting Synology Cache Advisor. [ 81.549911] systemd[1]: Created slice OAuthService's slice. [ 81.557487] systemd[1]: Starting OAuthService's slice. [ 81.564967] systemd[1]: Created slice r8152's slice. [ 81.571921] systemd[1]: Starting r8152's slice. [ 81.578701] systemd[1]: Created slice FileStation's slice. [ 81.586267] systemd[1]: Starting FileStation's slice. [ 81.604900] systemd[1]: Starting Load Kernel Modules... [ 81.612091] systemd[1]: Created slice ActiveInsight's slice. [ 81.619708] systemd[1]: Starting ActiveInsight's slice. [ 81.628113] systemd[1]: Mounting Debug File System... [ 81.634587] systemd[1]: Created slice SSDP service. [ 81.641352] systemd[1]: Starting SSDP service. [ 81.648055] systemd[1]: Created slice synobackup daemon slice. [ 81.655976] systemd[1]: Starting synobackup daemon slice. [ 81.663658] systemd[1]: Listening on udev Kernel Socket. [ 81.671081] systemd[1]: Starting udev Kernel Socket. [ 81.679190] systemd[1]: Starting Link coredump path to volume if possible... [ 81.687947] systemd[1]: Created slice Package Center Slice. [ 81.695480] systemd[1]: Starting Package Center Slice. [ 81.702845] systemd[1]: Reached target Timers. [ 81.709329] systemd[1]: Starting Timers. [ 81.716259] systemd[1]: Starting unbind USB device... [ 81.718946] ACPI: Requesting acpi_cpufreq [ 81.719487] Monitor-Mwait will be used to enter C-1 state [ 81.719510] Monitor-Mwait will be used to enter C-2 state [ 81.719519] ACPI: acpi_idle registered with cpuidle [ 81.729042] systemd[1]: Created slice DirectoryServerForWindowsDomain's slice. [ 81.738710] systemd[1]: Starting DirectoryServerForWindowsDomain's slice. [ 81.747773] systemd[1]: Created slice Directory Service Client. [ 81.755779] systemd[1]: Starting Directory Service Client. [ 81.763644] systemd[1]: Created slice ScsiTarget's slice. [ 81.771145] systemd[1]: Starting ScsiTarget's slice. [ 81.779196] systemd[1]: Starting Journal Socket (/dev/log). [ 81.787164] systemd[1]: Mounted Debug File System. [ 81.793131] systemd[1]: Mounted Temporary Directory. [ 81.800599] systemd[1]: Started Synology Task Scheduler Init. [ 81.808571] systemd[1]: Started Load ntb_brd module. [ 81.815452] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected] [ 81.826346] systemd[1]: Started Set time zone information to kernel. [ 81.835454] systemd[1]: Started Set boot sequence config. [ 81.843055] systemd[1]: Started Disabling fan checking flag .... [ 81.851245] flashcache: flashcache-1.0-2022-09-21-12:47 initialized [ 81.859569] systemd[1]: Started Set hostname. [ 81.866381] systemd[1]: Started check integrity of rd.gz decompression. [ 81.875563] systemd[1]: Started unbind USB device. [ 81.882164] systemd[1]: Listening on Journal Socket (/dev/log). [ 81.883399] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2022-09-21-12:47-debug initialized [ 81.901761] systemd[1]: Reached target Sockets. [ 81.904824] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 81.906494] zram: Created 4 device(s) ... [ 81.926189] NET: Registered protocol family 10 [ 81.926195] systemd[1]: Starting Sockets. [ 81.927231] systemd[1]: Starting Journal Service... [ 81.945943] systemd[1]: Reached target Local File Systems. [ 81.953506] systemd[1]: Starting Local File Systems. [ 81.960922] systemd-journald[5081]: Failed to join audit multicast group. The kernel is probably too old or multicast reading is not supported. Ignoring: Operation not permitted [ 81.961632] systemd[1]: Starting Set boot sequence config for temporary use... [ 81.981046] sit: IPv6 over IPv4 tunneling driver [ 81.998610] systemd[1]: Starting D-Bus System Message Bus... [ 82.006989] systemd[1]: Starting udev Coldplug all Devices... [ 82.014868] systemd[1]: Starting Open vSwitch database server... [ 82.023160] systemd[1]: Starting D-Bus Session Message Bus... [ 82.031190] systemd[1]: Starting Mount usb fs... [ 82.040143] systemd[1]: Started Link coredump path to volume if possible. [ 82.049591] systemd[1]: Started Set boot sequence config for temporary use. [ 82.051436] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 82.051531] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 82.051622] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 82.051715] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 82.058248] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.2.4-NAPI [ 82.058249] e1000e: Copyright(c) 1999 - 2019 Intel Corporation. [ 82.063151] md: md1 stopped. [ 82.110877] systemd[1]: Started Mount usb fs. [ 82.118586] systemd[1]: Started Journal Service. [ 82.136918] systemd-journald[5081]: Received request to flush runtime journal from PID 1 [ 82.150534] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 82.252961] md: bind [ 82.253594] gre: GRE over IPv4 demultiplexor driver [ 82.264960] md: bind [ 82.269414] md: bind [ 82.275418] md: bind [ 82.278351] openvswitch: Open vSwitch switching datapath 2.4.1 [ 82.289323] md/raid1:md1: active with 4 out of 4 mirrors [ 82.391668] md1: detected capacity change from 0 to 2147418112 [ 82.403750] md1: unknown partition table [ 82.565106] Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.22 [ 82.572331] Copyright(c) 2007 - 2018 Intel Corporation. [ 82.786598] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 82.803436] Adding 1224700k swap on /dev/zram0. Priority:1 extents:1 across:1224700k SS [ 82.820576] Adding 1224700k swap on /dev/zram1. Priority:1 extents:1 across:1224700k SS [ 82.837064] Adding 1224700k swap on /dev/zram2. Priority:1 extents:1 across:1224700k SS [ 82.853556] Adding 1224700k swap on /dev/zram3. Priority:1 extents:1 across:1224700k SS [ 83.580864] igb 0000:00:14.0: irq 43 for MSI/MSI-X [ 83.580878] igb 0000:00:14.0: irq 44 for MSI/MSI-X [ 84.932413] igb 0000:00:14.0: added PHC on eth0 [ 84.937529] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Linux Driver [ 84.944671] igb 0000:00:14.0: eth0: (PCIe:integrated:integrated) [ 84.951527] igb 0000:00:14.0 eth0: MAC: 00:a0:c9:00:00:00 [ 84.957680] igb 0000:00:14.0: eth0: PBA No: 002100-000 [ 84.964327] igb 0000:00:14.0: LRO is disabled [ 84.969224] igb 0000:00:14.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 85.980246] igb 0000:00:14.1: irq 45 for MSI/MSI-X [ 85.980260] igb 0000:00:14.1: irq 46 for MSI/MSI-X [ 87.332763] igb 0000:00:14.1: added PHC on eth1 [ 87.337893] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Linux Driver [ 87.345040] igb 0000:00:14.1: eth1: (PCIe:integrated:integrated) [ 87.351879] igb 0000:00:14.1 eth1: MAC: 00:a0:c9:00:00:01 [ 87.358007] igb 0000:00:14.1: eth1: PBA No: 002100-000 [ 87.364583] igb 0000:00:14.1: LRO is disabled [ 87.369468] igb 0000:00:14.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 87.428278] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.5.5 [ 87.436096] Copyright(c) 1999 - 2019 Intel Corporation. [ 87.464167] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.7.29 [ 87.473635] i40e: Copyright(c) 2013 - 2018 Intel Corporation. [ 87.502423] tn40xx low_mem_msg proc entry initialized [ 87.508094] tn40xx low_mem_counter proc entry initialized [ 87.514151] tn40xx debug_msg proc entry initialized [ 87.519619] tn40xx: Tehuti Network Driver, 0.3.6.12.3 [ 87.570261] Compat-mlnx-ofed backport release: c22af88 [ 87.576032] Backport based on mlnx_ofed/mlnx-ofa_kernel-4.0.git c22af88 [ 87.583460] compat.git: mlnx_ofed/mlnx-ofa_kernel-4.0.git [ 87.678279] qed_init called [ 87.681418] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0 [ 87.687579] creating debugfs root node [ 87.708243] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0 [ 87.720433] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 87.727628] scsi8 : usb-storage 1-1.1:1.0 [ 87.732239] usbcore: registered new interface driver usb-storage [ 87.760161] usbcore: registered new interface driver usblp [ 87.778128] usbcore: registered new interface driver usbhid [ 87.785140] usbhid: USB HID core driver [ 87.798317] avoton_synobios: module license 'Synology Inc.' taints kernel. [ 87.806529] Disabling lock debugging due to kernel taint [ 87.814646] synobios open /dev/ttyS1 success [ 87.820469] 2025-6-13 13:35:34 UTC [ 87.825747] synobios: load, major number 201 [ 87.825752] Brand: Synology [ 87.825753] Model: DS-415+ [ 87.825755] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 87.825766] synobios cpu_arch proc entry initialized [ 87.825768] synobios crypto_hw proc entry initialized [ 87.825770] synobios syno_platform proc entry initialized [ 87.851635] Syno_HddMon: Initialization completed. [ 88.522960] device ovs-system entered promiscuous mode [ 88.533768] device ovs_eth0 entered promiscuous mode [ 88.736725] scsi 8:0:0:0: Direct-Access Synology DiskStation PMAP PQ: 0 ANSI: 6 [ 88.747106] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 88.753888] sd 8:0:0:0: [synoboot] 245760 512-byte logical blocks: (125 MB/120 MiB) [ 88.764006] sd 8:0:0:0: [synoboot] Write Protect is off [ 88.769885] sd 8:0:0:0: [synoboot] Mode Sense: 23 00 00 00 [ 88.771392] sd 8:0:0:0: [synoboot] No Caching mode page found [ 88.777849] sd 8:0:0:0: [synoboot] Assuming drive cache: write through [ 88.789277] sd 8:0:0:0: [synoboot] No Caching mode page found [ 88.795735] sd 8:0:0:0: [synoboot] Assuming drive cache: write through [ 88.804155] synoboot: synoboot1 synoboot2 [ 88.813302] sd 8:0:0:0: [synoboot] No Caching mode page found [ 88.819774] sd 8:0:0:0: [synoboot] Assuming drive cache: write through [ 88.827127] sd 8:0:0:0: [synoboot] Attached SCSI disk [ 90.889531] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 90.907187] device eth0 entered promiscuous mode [ 90.954121] IPv6: ADDRCONF(NETDEV_UP): ovs_eth0: link is not ready [ 91.040296] device ovs_eth1 entered promiscuous mode [ 91.954118] md: md2 stopped. [ 91.987147] md: bind [ 91.990431] md: bind [ 91.993715] md: bind [ 92.004210] md: bind [ 92.027540] xor: measuring software checksum speed [ 92.042653] prefetch64-sse: 8316.000 MB/sec [ 92.057662] generic_sse: 7456.000 MB/sec [ 92.062447] xor: using function: prefetch64-sse (8316.000 MB/sec) [ 92.097702] raid6: sse2x1 gen() 1078 MB/s [ 92.118706] raid6: sse2x1 xor() 2402 MB/s [ 92.139724] raid6: sse2x2 gen() 2058 MB/s [ 92.160732] raid6: sse2x2 xor() 2869 MB/s [ 92.181739] raid6: sse2x4 gen() 3214 MB/s [ 92.202751] raid6: sse2x4 xor() 2589 MB/s [ 92.207529] raid6: using algorithm sse2x4 gen() (3214 MB/s) [ 92.213779] raid6: .... xor() 2589 MB/s, rmw enabled [ 92.219346] raid6: using ssse3x2 recovery algorithm [ 92.268419] md: raid6 personality registered for level 6 [ 92.274384] md: raid5 personality registered for level 5 [ 92.280349] md: raid4 personality registered for level 4 [ 92.286306] md: raidF1 personality registered for level 45 [ 92.292754] md/raid:md2: device sda5 operational as raid disk 0 [ 92.299402] md/raid:md2: device sdd5 operational as raid disk 3 [ 92.306054] md/raid:md2: device sdc5 operational as raid disk 2 [ 92.312698] md/raid:md2: device sdb5 operational as raid disk 1 [ 92.320116] md/raid:md2: allocated 4368kB [ 92.324737] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 92.333144] RAID conf printout: [ 92.333147] --- level:5 rd:4 wd:4 [ 92.333150] disk 0, o:1, dev:sda5 [ 92.333153] disk 1, o:1, dev:sdb5 [ 92.333155] disk 2, o:1, dev:sdc5 [ 92.333158] disk 3, o:1, dev:sdd5 [ 92.395905] md2: detected capacity change from 0 to 2985773432832 [ 92.403217] md2: unknown partition table [ 92.408580] md: md4 stopped. [ 92.413835] md: bind [ 92.417136] md: bind [ 92.420457] md: bind [ 92.424991] md/raid:md4: device sda7 operational as raid disk 0 [ 92.431668] md/raid:md4: device sdb7 operational as raid disk 2 [ 92.438333] md/raid:md4: device sdd7 operational as raid disk 1 [ 92.445635] md/raid:md4: allocated 3312kB [ 92.450320] md/raid:md4: raid level 5 active with 3 out of 3 devices, algorithm 2 [ 92.458750] RAID conf printout: [ 92.458753] --- level:5 rd:3 wd:3 [ 92.458756] disk 0, o:1, dev:sda7 [ 92.458759] disk 1, o:1, dev:sdd7 [ 92.458764] disk 2, o:1, dev:sdb7 [ 92.506738] md4: detected capacity change from 0 to 1888275398656 [ 92.551551] md4: unknown partition table [ 92.556860] md: md3 stopped. [ 92.636608] md: bind [ 92.639880] md: bind [ 92.643218] md: bind [ 92.646560] md: bind [ 92.651196] md/raid:md3: device sda6 operational as raid disk 0 [ 92.657860] md/raid:md3: device sdb6 operational as raid disk 3 [ 92.664525] md/raid:md3: device sdd6 operational as raid disk 2 [ 92.671165] md/raid:md3: device sdc6 operational as raid disk 1 [ 92.678563] md/raid:md3: allocated 4368kB [ 92.683254] md/raid:md3: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 92.691676] RAID conf printout: [ 92.691679] --- level:5 rd:4 wd:4 [ 92.691683] disk 0, o:1, dev:sda6 [ 92.691686] disk 1, o:1, dev:sdc6 [ 92.691689] disk 2, o:1, dev:sdd6 [ 92.691691] disk 3, o:1, dev:sdb6 [ 92.763019] md3: detected capacity change from 0 to 3150583234560 [ 92.783793] md3: unknown partition table [ 93.401971] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 93.417435] device eth1 entered promiscuous mode [ 93.437060] bio: create slab at 1 [ 93.445562] IPv6: ADDRCONF(NETDEV_UP): ovs_eth1: link is not ready [ 96.536660] flashcache_syno: /dev/vg1000/lv exclude check success [ 97.619500] bio: create slab at 2 [ 97.624180] Btrfs loaded [ 97.627404] BTRFS: device label 2022.11.03-17:41:47 v25556 devid 1 transid 1854710 /dev/mapper/cachedev_0 [ 97.638687] BTRFS info (device dm-1): enabling auto syno reclaim space [ 97.646023] BTRFS info (device dm-1): use ssd allocation scheme [ 97.652664] BTRFS info (device dm-1): using free space tree [ 97.658912] BTRFS: has skinny extents [ 101.063176] CIFS VFS: Error connecting to socket. Aborting operation. [ 101.070569] CIFS VFS: cifs_mount failed w/return code = -101 [ 103.412359] CIFS VFS: Error connecting to socket. Aborting operation. [ 103.419788] CIFS VFS: cifs_mount failed w/return code = -101 [ 105.139534] Synotify use 16384 event queue size [ 105.144744] Synotify use 16384 event queue size [ 105.889856] warning: nginx' uses 32-bit capabilities (legacy support in use) [ 105.890261] warning: nginx' uses 32-bit capabilities (legacy support in use) [ 106.731357] ata1.00: supports DRM functions and may not be fully accessible [ 106.739916] ata1.00: supports DRM functions and may not be fully accessible [ 106.748238] ata1.00: configured for UDMA/133 [ 106.753031] ata1: EH complete [ 106.957842] ata2.00: configured for UDMA/133 [ 106.962638] ata2: EH complete [ 107.896932] ata5.00: configured for UDMA/133 [ 107.901739] ata5: EH complete [ 108.967903] ata6.00: configured for UDMA/133 [ 108.972705] ata6: EH complete [ 111.601420] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: oldalloc [ 112.237071] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(a9fa419a5b2a). [ 112.267141] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 112.339608] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 112.352937] iSCSI:target_core_configfs.c:5777:target_init_dbroot db_root: cannot open: /etc/target [ 112.363152] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 112.440974] iSCSI:target_core_file.c:152:fd_attach_hba RODSP plugin for fileio is enabled. [ 112.450265] iSCSI:target_core_file.c:159:fd_attach_hba ODX Token Manager is enabled. [ 112.459032] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. [ 112.469174] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled. [ 112.478069] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled. [ 112.761177] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512 [ 112.940161] FAT-fs (synoboot2): fat_set_state: set=1 process=synopkicompatsy pid=11456 [ 113.011521] FAT-fs (synoboot2): fat_set_state: set=0 process=synopkicompatsy pid=11456 [ 113.248332] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null) [ 114.756024] 8021q: 802.1Q VLAN Support v1.8 [ 114.760819] 8021q: adding VLAN 0 to HW filter on device eth0 [ 114.767318] 8021q: adding VLAN 0 to HW filter on device eth1 [ 116.051147] CIFS VFS: Error connecting to socket. Aborting operation. [ 116.058515] CIFS VFS: cifs_mount failed w/return code = -101 [ 116.730047] r8152: module verification failed: signature and/or required key missing - tainting kernel [ 116.747691] usbcore: registered new interface driver r8152 [ 116.755303] etxhci_hcd-170202 0000:04:00.0: WARN Event TRB for slot 1 ep 2 with no TDs queued? [ 116.764985] etxhci_hcd-170202 0000:04:00.0: WARN Event TRB for slot 1 ep 3 with no TDs queued? [ 116.775086] etxhci_hcd-170202 0000:04:00.0: WARN Event TRB for slot 1 ep 6 with no TDs queued? [ 117.889887] usb 3-1: reset SuperSpeed USB device number 2 using etxhci_hcd-170202 [ 118.987724] r8152 3-1:1.0 eth2: v2.19.2 (2024/10/21) [ 118.993316] r8152 3-1:1.0 eth2: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[ 119.010838] r8152 3-1:1.0 eth2: chip rev 14 [ 119.112996] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 119.213717] device ovs_eth2 entered promiscuous mode [ 119.256311] device eth2 entered promiscuous mode [ 119.283186] IPv6: ADDRCONF(NETDEV_UP): ovs_eth2: link is not ready [ 121.090311] fuse init (API version 7.22) [ 122.227723] IPv6: ADDRCONF(NETDEV_CHANGE): ovs_eth2: link becomes ready [ 122.237499] r8152 3-1:1.0 eth2: Promiscuous mode enabled [ 122.244421] r8152 3-1:1.0 eth2: carrier on [ 150.602916] cgroup: systemd (1) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 150.772996] tun: Universal TUN/TAP device driver, 1.6 [ 150.778693] tun: (C) 1999-2004 Max Krasnyansky [email protected] [ 154.866654] Bridge firewalling registered [ 211.906054] r8152 3-1:1.0: read type=0x01cc, index=0xb408 fail -71 [ 211.913118] ------------[ cut here ]------------ [ 211.918421] WARNING: at //source/r8152/r8152.c:1400 ocp_read_word+0x7e/0x90 r8152 [ 211.927327] Modules linked in: bridge stp pci_stub vhost_net tun kvm_intel kvm fuse r8152(OF) 8021q vfat fat vhost_scsi(O) vhost(O) tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) udf isofs cifs synoacl_vfs(O) btrfs zstd_decompress ecryptfs zstd_compress xxhash raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx leds_lp3943 aesni_intel glue_helper lrw gf128mul ablk_helper syno_hddmon(P) avoton_synobios(PO) hid_generic usbhid hid usblp usb_storage qede(O) qed(O) mlx5_core(O) mlx4_en(O) mlx4_core(O) mlx_compat(O) atlantic_v2(O) atlantic(O) tn40xx(O) i40e(O) ixgbe(O) be2net(O) i2c_algo_bit openvswitch(O) gre nf_defrag_ipv6 nf_conntrack igb(O) e1000e(O) [ 212.013471] sg dm_snapshot crc_itu_t crc_ccitt psnap p8022 llc zlib_deflate libcrc32c hfsplus md4 hmac sit tunnel4 ipv6 zram(C) flashcache_syno(O) flashcache(O) syno_flashcache_control(O) dm_mod crc32c_intel cryptd arc4 sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq mperf processor thermal_sys cpufreq_stats freq_table vxlan ip_tunnel loop etxhci_hcd xhci_hcd uhci_hcd ehci_pci ehci_hcd usbcore usb_common [last unloaded: avoton_synobios] [ 212.069475] CPU: 2 PID: 10404 Comm: snmpd Tainted: PF C O 3.10.108 #42962 [ 212.077812] Hardware name: Insyde MohonPeak/Type2 - Board Product Name1, BIOS M.012 2017/05/09 [ 212.087501] ffffffff8147dfd1 ffffffff8146f5e1 0000000000000002 ffff88025198bbf4 [ 212.096210] ffff88025198bc2c 000000000000a000 ffff8802720f2000 ffffffffa0e4536e [ 212.104993] ffffffb900000000 ffffffff81289913 000000000000040a ffff8802720f26c0 [ 212.113790] Call Trace: [ 212.116655] [] ? dump_stack+0xc/0x15 [ 212.122618] [] ? warn_slowpath_common+0x56/0x6c [ 212.129676] [] ? ocp_read_word+0x7e/0x90 [r8152] [ 212.136833] [] ? number.isra.1+0x383/0x3e0 [ 212.143410] [] ? r8152_phy_read+0x63/0x90 [r8152] [ 212.150650] [] ? rtl8152_get_settings+0x1d5/0x390 [r8152] [ 212.158661] [] ? ethtool_get_settings+0x14f/0x170 [ 212.165920] [] ? seq_vprintf+0x25/0x50 [ 212.172095] [] ? seq_printf+0x40/0x50 [ 212.178254] [] ? dev_ethtool+0x414/0x1e00 [ 212.184769] [] ? inet_gifconf+0xb8/0x130 [ 212.191140] [] ? netdev_run_todo+0x4d/0x270 [ 212.197758] [] ? dev_ioctl+0xef/0x7c0 [ 212.203821] [] ? sk_setup_caps+0xc0/0xc0 [ 212.210203] [] ? wake_up_atomic_t+0x30/0x30 [ 212.216925] [] ? sock_do_ioctl+0x3f/0x50 [ 212.223360] [] ? sock_ioctl+0x217/0x270 [ 212.229691] [] ? do_vfs_ioctl+0x797/0x9d0 [ 212.236231] [] ? __fput+0x125/0x250 [ 212.242073] [] ? SyS_ioctl+0xa3/0xb0 [ 212.248033] [] ? system_call_fastpath+0x1c/0x21 [ 212.255080] ---[ end trace 4cb6a38bf888da7e ]--- [ 224.924612] r8152 3-1:1.0: read type=0x0133, index=0xb414 fail -71 [ 411.161675] r8152 3-1:1.0: read type=0x01cc, index=0xb400 fail -71

Jun 13 '25 14:06 sspeed22

I would like to know about the index fails you see, but I think the problem here is the YuLinca switch. I get the same crappy upload performance when I plug the built-in gigabit adapter to the YuLinca switch. Strangely download performance is great.

Although I do get a strange pause every single time on the DS415+ that I don't see elsewhere. It's consistent from every test client back to the DS415+, every single time.

test client to DS415+ on gigabit Connecting to host 10.1.1.1, port 5201 [ 5] local 10.1.1.16 port 54417 connected to 10.1.1.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 114 MBytes 954 Mbits/sec 0 1.17 MBytes
[ 5] 1.00-2.00 sec 112 MBytes 940 Mbits/sec 0 1.18 MBytes
[ 5] 2.00-3.00 sec 112 MBytes 942 Mbits/sec 0 1.20 MBytes
[ 5] 3.00-4.00 sec 111 MBytes 932 Mbits/sec 0 1.20 MBytes
[ 5] 4.00-5.00 sec 112 MBytes 940 Mbits/sec 0 1.20 MBytes
[ 5] 5.00-6.00 sec 74.5 MBytes 625 Mbits/sec 1 1.41 KBytes
[ 5] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec 1 1.41 KBytes
[ 5] 7.00-8.00 sec 0.00 Bytes 0.00 bits/sec 1 1.41 KBytes
[ 5] 8.00-9.00 sec 22.0 MBytes 185 Mbits/sec 371 882 KBytes
[ 5] 9.00-10.00 sec 112 MBytes 941 Mbits/sec 0 993 KBytes

[ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 770 MBytes 646 Mbits/sec 374 sender [ 5] 0.00-10.01 sec 768 MBytes 643 Mbits/sec receiver

iperf Done. root@diskstation:/var/log/synolog# /volume1/@appstore/synocli-monitor/bin/iperf3 -c 10.1.1.167

same test client to another test client on 10gbe Connecting to host 10.1.1.167, port 5201 [ 5] local 10.1.1.16 port 49806 connected to 10.1.1.167 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.09 GBytes 9.33 Gbits/sec 0 3.22 MBytes
[ 5] 1.00-2.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.30 MBytes
[ 5] 2.00-3.00 sec 1.09 GBytes 9.39 Gbits/sec 0 3.34 MBytes
[ 5] 3.00-4.00 sec 1.09 GBytes 9.38 Gbits/sec 0 3.44 MBytes
[ 5] 4.00-5.00 sec 1.09 GBytes 9.35 Gbits/sec 383 2.66 MBytes
[ 5] 5.00-6.00 sec 1.09 GBytes 9.35 Gbits/sec 467 1.98 MBytes
[ 5] 6.00-7.00 sec 1.09 GBytes 9.38 Gbits/sec 0 2.07 MBytes
[ 5] 7.00-8.00 sec 1.09 GBytes 9.38 Gbits/sec 0 2.14 MBytes
[ 5] 8.00-9.00 sec 1.09 GBytes 9.37 Gbits/sec 0 2.19 MBytes
[ 5] 9.00-10.00 sec 1.09 GBytes 9.39 Gbits/sec 0 2.23 MBytes

[ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 10.9 GBytes 9.37 Gbits/sec 850 sender [ 5] 0.00-10.04 sec 10.9 GBytes 9.34 Gbits/sec receiver

Jun 13 '25 14:06 sspeed22

Did you check this page? https://github.com/bb-qq/r8152/wiki/Troubleshooting

Jun 23 '25 03:06 bb-qq