r8152
r8152 copied to clipboard
bb-qq
Package suddenly not worked (endless broken)
Description of the problem
Replace this line with your answer.
Description of your products
- the product name of your NAS model
- and output of
uname -acommand- DSM version x.x
- the product name of the ethernet dongle
DS918+ (xpenology) Linux NAS 4.4.302+ #69057 SMP Fri Jan 12 17:02:59 CST 2024 x86_64 GNU/Linux synology_apollolake_918+ DSM 7.2.1 U5 (Lastest) Cablemates 2.5G USB Ethernet (0bda:8156:3000)
Description of your environment
- connect directly to a PC or using a Ethernet switch
- PC: NIC model name or chipset name
- Ethernet switch: model name
- cable category (Cat.5e or Cat.6 or Cat.7)
PC used same RTL8156 Connected by switch with multiple 2.5G devices (Other work well) Cable is Cat.6 Switch is QNAP QSW Series (5P)
Output of dmesg command
Output of lsusb command
|__usb1 1d6b:0002:0404 09 2.00 480MBit/s 0mA 1IF (Linux 4.4.302+ xhci-hcd xHCI Host Controller 0000:00:14.0) hub
|__1-7 0bda:0129:3960 ff 2.00 480MBit/s 500mA 1IF (Generic USB2.0-CRW 20100201396000000)
|__usb2 1d6b:0003:0404 09 3.00 5000MBit/s 0mA 1IF (Linux 4.4.302+ xhci-hcd xHCI Host Controller 0000:00:14.0) hub
|__2-1 f400:f400:0100 00 3.00 5000MBit/s 896mA 1IF (SanDisk Ultra Fit 4C530001071029109505)
|__2-3 0bda:8156:3000 00 3.20 5000MBit/s 512mA 1IF (Realtek USB 10/100/1G/2.5G LAN 000000001)
USB Keyboard is removed before type it
Output of ifconfig -a command
docker0 Link encap:Ethernet HWaddr 02:42:4D:64:10:99
inet addr:172.17.0.1 Bcast:172.17.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 9C:5C:8E:20:F5:25
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:85030 errors:0 dropped:0 overruns:0 frame:0
TX packets:155707 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8964180 (8.5 MiB) TX bytes:213353842 (203.4 MiB)
eth1 Link encap:Ethernet HWaddr A0:CE:C8:C8:14:5F
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:8721 (8.5 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:19774 errors:0 dropped:0 overruns:0 frame:0
TX packets:19774 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:2764065 (2.6 MiB) TX bytes:2764065 (2.6 MiB)
ovs-syste Link encap:Ethernet HWaddr 7A:89:7E:36:BE:27
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ovs_eth0 Link encap:Ethernet HWaddr 9C:5C:8E:20:F5:25
inet addr:192.168.1.129 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: 2001:470:24:2ff:9e5c:8eff:fe20:f525/64 Scope:Global
inet6 addr: fe80::9e5c:8eff:fe20:f525/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:81367 errors:0 dropped:0 overruns:0 frame:0
TX packets:19687 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:7569999 (7.2 MiB) TX bytes:205920319 (196.3 MiB)
ovs_eth1 Link encap:Ethernet HWaddr A0:CE:C8:C8:14:5F
inet addr:192.168.11.1 Bcast:192.168.11.255 Mask:255.255.255.0
inet6 addr: fe80::a2ce:c8ff:fec8:145f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:8721 (8.5 KiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
tap021132 Link encap:Ethernet HWaddr 46:25:DD:1F:46:80
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:675 errors:0 dropped:0 overruns:0 frame:0
TX packets:44100 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:51045 (49.8 KiB) TX bytes:3833479 (3.6 MiB)
It work well at today morning but not work after reboot NAS
I fount no LAN 2 on Control panel and checked package manager
It need to fix and click fix i can found LAN 2 on DSM but can't communication with other device
Reboot it again package broken again
I tried remove -> reboot -> reinstall -> reboot same result
$route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.1.1 0.0.0.0 UG 0 0 0 ovs_eth0
172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ovs_eth0
192.168.11.0 0.0.0.0 255.255.255.0 U 0 0 0 ovs_eth1
$ping 192.168.11.1
PING 192.168.11.1 (192.168.11.1) 56(84) bytes of data.
64 bytes from 192.168.11.1: icmp_seq=1 ttl=64 time=0.034 ms
$ping 192.168.11.3
PING 192.168.11.3 (192.168.11.3) 56(84) bytes of data.
From 192.168.11.1 icmp_seq=1 Destination Host Unreachable
$lsmod|grep r8
r8152 224445 0
r8168 544464 0
r8169 71712 0
mii 4099 2 r8169,usbnet
usbcore 210297 12 etxhci_hcd,r8152,usblp,uhci_hcd,usb_storage,ehci_hcd,ehci_pci,usbhid,usbnet,cdc_ncm,xhci_hcd,xhci_pci
Tried Force ReInstall DSM but nothing changed
edit
Network is fixed by manully
but Package broken is not fixed (I need to click fix at every reboot)
Did you try full re-installation? https://github.com/bb-qq/r8152/wiki/Troubleshooting#uninstall-completely--full-reinstallation
Did you try full re-installation? https://github.com/bb-qq/r8152/wiki/Troubleshooting#uninstall-completely--full-reinstallation
Yes I tried that (remove is uninstall&delete appconf)
but nothing changed
Package always broken at reboot
👋 I'm experiencing the same problem. After installation the NIC is recognised. After a restart of DSM the NIC will not be recognised anymore.
It seems like the DMS package isn't automatically started. Simply going into Package Center, and clicking Run on the driver package brings back the NIC.
DSM Version: DSM 7.2.1-69057 Update 5
Driver Version: r8152-r1000-2.17.1-2_7.2.spk
Adapter: CLUB 3D CAC-1420 (RTL8156/Type-A)
Device: DS1522+
EDIT
It looks like either this issue only occurred on the first reboot after installation or is intermittent. I just rebooted again and I can see the package running and the NIC visible.
For Xpnology user + ARCLoader 24.5.13 tested on noname AliExpress USB3.0 to LAN dongle on rtl8152 chip sorry but i dont have a 2.5G dongle TRY: 1.Install as usual [https://github.com/bb-qq/r8152] 2. After reboot you have broken pakage 3.Reboot go to ARCLoader config mode 4. Go to "Show ARC Loader" 5. Go to DSM Modules 6. Go to "Choose Modules" 7. Find r8152 and uncheck it 8. Find realteck (Realteck PHY driver) tick this 9. Rebuild Loader Everything should work and after reboot too.
For Xpnology user + ARCLoader 24.5.13 tested on noname AliExpress USB3.0 to LAN dongle on rtl8152 chip sorry but i dont have a 2.5G dongle TRY: 1.Install as usual [https://github.com/bb-qq/r8152] 2. After reboot you have broken pakage 3.Reboot go to ARCLoader config mode 4. Go to "Show ARC Loader" 5. Go to DSM Modules 6. Go to "Choose Modules" 7. Find r8152 and uncheck it 8. Find realteck (Realteck PHY driver) tick this 9. Rebuild Loader Everything should work and after reboot too.
I was used ARPL
At first time all OK. but some day i was reboot NAS and package is broken
No DSM or bootloiader changed
OK I will reCheck bootloader setting
For Xpnology user + ARCLoader 24.5.13 tested on noname AliExpress USB3.0 to LAN dongle on rtl8152 chip sorry but i dont have a 2.5G dongle TRY: 1.Install as usual [https://github.com/bb-qq/r8152] 2. After reboot you have broken pakage 3.Reboot go to ARCLoader config mode 4. Go to "Show ARC Loader" 5. Go to DSM Modules 6. Go to "Choose Modules" 7. Find r8152 and uncheck it 8. Find realteck (Realteck PHY driver) tick this 9. Rebuild Loader Everything should work and after reboot too.
I was used ARPL
At first time all OK. but some day i was reboot NAS and package is broken
No DSM or bootloiader changed
OK I will reCheck bootloader setting
Try to deselect r8152 driver in Loader Modules
-
ARPL v1.1 Beta have a r8152 driver in the: Advanced menu - Modules - Coose modules to include - r8152
-
ARPL i18 Modules menu - Show/Select modules - r8152
Another way (not automatically)
- manualy Restore package in the package center after next reboot
- via ssh somthing like this (do not remeber right command) synopkg restart
I dont find any solusion that restart broken package after boot automatically not via Scheduler and not via script. Sorry for my English.
For Xpnology user + ARCLoader 24.5.13 tested on noname AliExpress USB3.0 to LAN dongle on rtl8152 chip sorry but i dont have a 2.5G dongle TRY: 1.Install as usual [https://github.com/bb-qq/r8152] 2. After reboot you have broken pakage 3.Reboot go to ARCLoader config mode 4. Go to "Show ARC Loader" 5. Go to DSM Modules 6. Go to "Choose Modules" 7. Find r8152 and uncheck it 8. Find realteck (Realteck PHY driver) tick this 9. Rebuild Loader Everything should work and after reboot too.
I was used ARPL At first time all OK. but some day i was reboot NAS and package is broken No DSM or bootloiader changed OK I will reCheck bootloader setting
Try to deselect r8152 driver in Loader Modules
* ARPL v1.1 Beta have a r8152 driver in the: Advanced menu - Modules - Coose modules to include - r8152 * ARPL i18 Modules menu - Show/Select modules - r8152Another way (not automatically)
* manualy Restore package in the package center after next reboot * via ssh somthing like this (do not remeber right command) synopkg restartI dont find any solusion that restart broken package after boot automatically not via Scheduler and not via script. Sorry for my English.
Thanks for help
Problem is fixed
I don't know why it broken
but It create another problem
I can upload huge data with SMB but I can't do that with FTP (Even can't upload 5~10G File) SMB : Can transfer over 100G data/Full Speed FTP : Can't transfer few G files/Slow
If i reEnable bootloader's driver package is broken but all work well