bb-qq

I don't have any ideas to investigate the cause, but since your NAS seems to have much memory, could you try doubling the value of `target_value` with the `/var/packages/aqc111/scripts/apply-memory-setting`, although...

> Since you have the same Synology model, have you not encountered any of these issues yourself? I have experienced a few times a year when I did not have...

I created drivers for the DSM 7.2 BETA, but I think it is unlikely that the DSM update will improve symptoms. https://github.com/bb-qq/aqc111/releases/tag/1.3.3.0-11 I wish I could at least find the...

What will the speed be if I use the same configuration of Hub and cables but change only the QNA-UC5G1T to connect to a Windows PC?

I have already updated the firmware in my environment and the performance is fine. I also have low power mode enabled. When you measure the speed on a Windows PC,...

Since then I have tried to find out where the stock firmware is, but unfortunately I could not find it. This adapter is inherently capable of more than 4Gbps, we...

Currently, this driver does not handle the two interfaces well. Also, even if the driver is modified, it may not work properly at the hardware level due to bandwidth issues...

For Realtek adapters, it works in the following way I think the same method will work, so please try it. However, it may not have enough power. https://github.com/bb-qq/r8152/wiki/Troubleshooting#multiple-identical-devices-do-not-work Since this...

From the output of `lsusb` it appears that the device is not recognized at the hardware level and driver loading is skipped. Perhaps the USB port is not getting enough...

> If QNA-UC5G1T is not recognized, will the driver not start? Indeed, the driver package itself should boot. If you post the entire dmesg output here I might be able...