bb-qq
bb-qq
Did you run ``ifconfig eth2 up`` and is it succeeded? Please confirm the result of ``ifconfig -a``.
Hmm, it's weird. VID/PID shown in the result of ``lsusb`` is certainly supported by the driver. So could you let me know the result of ``dmesg``? The required part is...
Can you assign an IP address after that?
It's my pleasure. > Do you have a donation page anywhere? I have created a donation page for the experiment. Please take a look if you feel like it. https://www.patreon.com/bb_qq
You may want to try the standard Gigabit Ethernet connection first. If it works, there seems to be a problem with the NBASE-T environment or thermal issue. If it doesn't...
Hmm, it is a difficult situation... What is your MTU value? Because of USB based ethernet drivers consume more CPU and the USB protocol has a large amount of overhead,...
Do you have another PC? Confirming PC to PC communication should help to isolate the problem. Also, I noticed that Connectx-2 does not support NBASE-T because the device was released...
> I have a laptop with GbE and USB 3.0 ports, but nothing I can plug the Mellanox card into. I connected the laptops GbE port into the RTL (Syno)...
Did it go well? Also please make sure using the front port because some users reported instability issues when they use rear ports.
I concluded Synology devices have a signal quality issue on rear USB ports from the fact while the front USB port is soldered on the main PCB, the rear USB...