bb-qq

I am glad to hear that it worked successfully. Is the problem now that throughput is affected when static routes are configured? I am not sure about the configuration of...

I wrote the previous comment in the hope that by creating an independent subnet for the desired route, it would be possible to communicate over the desired route without explicitly...

>The result started with 231 megabytes per second and then gradually fell and rose 180-190-200, later it began to fall to 128 megabytes per second. Curve in the direction of...

> Is it better to connect two clients via a cable or is it possible via wifi 5 and 6? I have only 1 2.5 G port in my router...

Since simultaneous transfer rates of nearly 2 Gbps are achieved using an Ethernet cable, there appears to be no problem with the WL-NWU330GCA or the driver. So to address the...

Since the disk transfer rate is the bottleneck in the 2bay model, the 2.5 bps speed would be valuable only if the operation is completed on the memory cache. It...

``` r8152 8-2:1.0 eth2: get_registers -71 ``` This line indicates that errors often occur in the interaction between the driver and the hardware. This may prevent adequate performance. It is...

This is the first time I have heard of the symptoms of having to change the server name. Wouldn't restarting the Windows PC solve the problem? Information such as what...

When IP addresses of the same subnet are assigned to multiple interfaces, detailed settings are required to make the interfaces communicate as desired. Therefore, I recommend avoiding such a configuration...

To clean everything, clear your `@appconf` directory after uninstallation. ``` $ ls -l /var/packages/r8152/ total 96 drwxr-xr-x 2 root root 4096 Aug 6 21:06 conf -rw-r--r-- 1 root root 0...