bb-qq

I still can't figure out why 1.3.3.0-5 works but the newer version doesn't work at all. Perhaps the behavior is the same when DSM is upgraded. Until I figure out...

> It appears data inbound to the DS718+ is peaking at 1.1Gbps. I would guess that disk write speed is the bottleneck. Measuring pure communication speed using iperf would help...

FYI: Changing the version of SMB or some configurations in smb.conf might help improving performance. https://www.synology.com/en-us/knowledgebase/DSM/help/DSM/AdminCenter/file_winmacnfs_win I appreciate it if you share the solution to the issue with other people...

I forgot to reply to [your previous comment](https://github.com/bb-qq/aqc111/issues/32#issuecomment-735442096).... > Want me to swap to the back? No, I just wanted to confirm you are using the front port. > dmesg...

Hmm, can you test under direct connection using a cross cable without the switch to isolate the problem? And I would like to know the output of `Get-SmbConnection` that indicates...

What happens if the QNA-UC5G1T dongle is attached to the PC without changing the environment such as switches and cables?

Some transceivers are not compatible with NBASE-T, which makes communication unstable, so I suspected that case. However, since you are getting correct performance in some setups, that seems unlikely.

Have you tried Jumbo-Frame? It may help to increase throughput for platforms with poor CPU.

From the pictures on [this page](https://www.servethehome.com/synology-ds1812-hardware-teardown/), the USB 2.0 ports are soldered on the main PCB directly, whereas USB 3.0 ports seem to be implemented on a different board. I...

Currently, I am suspecting the cause of instability/performance issues is the driver of the USB host controller comes from the old kernel because this kind of issue is reported with...