Bas Stottelaar

Hi @buehler, I'm not working on the project anymore (switched jobs). However, what I would have expected, is that the properties under `metadata` are specified the same way as the...

I'm in the middle of a moving, so I won't be able to test this soon.

I was able to dump a firmware, overwrite it with something else and load it again using the steps mentioned [here](https://github.com/basilfx/TRADFRI-Hacking#software-used). Like @oliv3r, you need to have a dump of...

The strings file is just a dump of all the strings that can be found (using `strings `). It's of no use, apart from hacking the firmware. You probably need...

Hi @OleUrgast, There are two possibilities: either the serial number is depends on the MCU, or it is embedded in the SPI flash. If it's the first, than every module...

@spacesloth0x I did not have read the flash contents yet. I only read the flash ID, to identify the chip used. But I presume it is just a standard flash...

I removed the copper fill below the antenna. I'm quite certain that it will affect performance, but since the ZLL module is also tightly soldered into a light bulb, I...

Thanks for the information! Can you confirm its part number? The [E1524](https://github.com/basilfx/TRADFRI-Hacking/blob/master/PRODUCTS.md#e1524-remote-controller) remote is already in the overview, but it seems that ikea now sells it as the E1810 (not...

Emulation would mean that you would create some piece of hardware that behaves exactly as the IKEA blinds. It would be much easier to see how the IKEA blinds work,...

Not that I am aware of, but that looks promising. I'll keep this issue open if anyone is working on this.