omarchy icon indicating copy to clipboard operation
omarchy copied to clipboard

Omarchy Steam Game very low FPS

Open CAI991108 opened this issue 3 months ago • 4 comments

System details

Intel i9-7980XE - Dual NVIDIA RTX 2080 Ti - Omarchy v3.0.2

What's wrong?

tech spec goes first 🤓: Image

CUDA Runtime Version: 13000  # CUDA 13.0
CUDA Driver Version: 13000   # 驱动版本匹配
Driver Version: 580.95.05    # NVIDIA驱动版本
Device 0: NVIDIA GeForce RTX 2080 Ti  # 识别到两块RTX 2080 Ti
Device 1: NVIDIA GeForce RTX 2080 Ti

My nv-driver was automatically co-installed when I setting up the omarchy, and I check the https://www.nvidia.cn/drivers/lookup/ that the 580.95.05 is a supported version for RTX2080Ti.

I assumes that gaming goes nothing with CUDA version? (through I check anyway :), so I run the nvBanditTesthttps://github.com/NVIDIA/nvbandwidth and here's the result:

主机-设备传输 (PCIe带宽):​​
- CPU→GPU: ~6-13 GB/s (单卡) / ~18 GB/s (总和)
- GPU→CPU: ~6-13 GB/s (单卡) / ~19 GB/s (总和)
这些数值对于PCIe 3.0 x16来说是​​正常范围​​(理论最大值约16GB/s)。
​​设备间传输 (NVLink带宽):​​
- GPU↔GPU: ~47 GB/s (单方向) / ~94 GB/s (总和)
- 双向总带宽: ~188 GB/s
这些数值表明您的两张RTX 2080 Ti之间​​NVLink连接正常工作​​,达到了预期的性能水平。
​​设备本地拷贝:​​
- 单卡内部: ~250-260 GB/s
这是显卡内部内存带宽的测试结果,对于RTX 2080 Ti来说是合理的数值。

... I pretty sure there's no Hardware Mistakes nor PCIE Bandit Mistakes? 🙂‍↔ And during the nvBanditTest, both GPU can go up to 100% usage (which is normal). However, when it comes to Steam games, the GPU 1 (which is my prime GPU runs on PCIE 3.0 x 16, GPU 0 runs on x8) can only utilize around 30%, and the game is stuttering like with only 12FPS

I guess it's due to something with hyprland tiling windows management .,etc? And I have no ideas on how to fix it yet 😥 I tried to setup windowrules to immedate the steam windows from tiling, but I end up broken my wifi module... : (

Other than omarchy is smooth in all ways of sense

CAI991108 avatar Oct 12 '25 07:10 CAI991108

I would suggest you download nvtop, and check whether steam is running on either of your discrete gpus. If not, then you can try nvidia-prime, or envycontrol to switch gpu profiles. While your effort is appreciable, next time do consider visiting the help section in Omarchy discord.

https://github.com/Syllo/nvtop

https://github.com/bayasdev/envycontrol

https://wiki.archlinux.org/title/PRIME

sa-dd avatar Oct 13 '25 05:10 sa-dd

@sa-dd

Image

The game is running on my discrete GPU (but not utilized).

I have two more laptops runing omarchy, one 8745H with Radeon 780M, another 13980HX with 4080 Laptop. They run games just really "out-of-box", I change nothing on settings 😥

No idea what''s wrong with my Intel i9-7980XE - Dual NVIDIA RTX 2080 Ti - Omarchy v3.0.2

CAI991108 avatar Oct 16 '25 17:10 CAI991108

Change power profile to performance

Artem1k avatar Nov 08 '25 02:11 Artem1k

I've ran into the same issue and disabling VSync in the game helped.

mhnowak avatar Dec 01 '25 22:12 mhnowak