basbruss
Maximum/Minimum Position can't be unchecked
What version of Adaptive Cover are you using?
1.4.5
What version of Home Assistant are you using?
2025.5.1
Checklist
- [x] I have filled out the issue template to the best of my ability.
- [x] This issue only contains 1 issue (if you have multiple issues, open one issue for each issue).
- [x] This issue is not a duplicate issue of currently previous issues..
Describe the issue
I added the Maximum Position and now when I remove it and click on okay, the changes are not saved.
Reproduction steps
- Add Maximum Position
- save
- try to remove it.
Diagnostics dump
No response
Hi,
Your Default Position must be less than your Maximum Position and greater than the Minimum position!
Take a look at this tutorial I wrote to help.
Regards, patrickp78
The Problem is, that when I uncheck the Maximum Position, it shouldn't matter?
The screenshot which I have posted is what is set now. When I try to change it to this
It's not saved.
I click twice on "ok" and when I go into the configuration again, I see this again:
I can change the values, but I can not deactivate the maximum and minimum postition:
Maybe the roller shutter settings are corrupted. This happened to me once or twice at first. Delete the shutter service and recreate one…
Me too I'm having the same problem. If I set min or max values I can't uncheck it anymore (it doesn't save the settings).
And I also have a strange behaviour, with the roller that goes up while the sun goes up in front of the window, until fully open, and then goes to default position when the sun is not anymore in front of the window
What you're describing sounds like a summer setting in climate mode. Look at the Vertical (or Tilt) Control Method sensor. It has three modes: Winter, Detected, and Summer. You need to check the temperature set in Summer mode against the minimum and maximum temperatures.