Barry Jackson
Barry Jackson
> I tested again in a Pi4B today using a recording of a RADE signal on the system to avoid the load of a browser. It decodes fine but only...
> @barjac, I was testing on another Windows 10 machine and it turned out to have the issue you were describing. I was able to fix it by installing the...
Thanks, that looks really useful. I will study it carefully :)
I finally got this working really well - making it repeatable was more difficult. I have added a bandpass to the TX audio output to clean up the spectrum 'whiskers'....
Other users are using different implementations of filtering to achieve the same results and there have been no RX issues reported but if V2 fixes the problem then nothing extra...
I now have a similar but slightly different issue. I am adding a Loudness Compensation Module between the Mic and FreeDV. The lv2 loudness module (mono) is in a pipewire-filter-chain...
OK all resolved now.
Not sure if this is related but testing with this patch: If FreeDV is run and the modem started without the radio switched on there is oddly no complaint from...
> I'm honestly not sure how the timeout stuff interacts with Hamlib exactly. What version of the latter are you running? Current git master @ #8d5256533 using rigctld. I was...
> Can you try running `rigctl` separately, once with `-C timeout=1000 -C retry=1 -C timeout_retry=1 ` and once without those arguments for comparison? Does it still take 10 seconds to...