v2ray自建失败

[chen510260x]

无论是[一键搭建]还是脚本，一开始ip能ping上，但是翻不了 debian 11/10都试过了

一键搭建是显示成功的，但实际翻不了

脚本显示V2RAY运行状态FAIL，具体如下 ● v2ray.service - V2Ray Service Loaded: loaded (/etc/systemd/system/v2ray.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Fri 2022-09-09 16:28:52 UTC; 25s ago Process: 3268 ExecStart=/usr/bin/v2ray/v2ray -config /etc/v2ray/config.json (code=e> Main PID: 3268 (code=exited, status=2) CPU: 13ms

Sep 09 16:28:52 vultr systemd[1]: v2ray.service: Main process exited, code=exited, stat> Sep 09 16:28:52 vultr systemd[1]: v2ray.service: Failed with result 'exit-code'. Sep 09 16:28:52 vultr systemd[1]: v2ray.service: Scheduled restart job, restart counter> Sep 09 16:28:52 vultr systemd[1]: Stopped V2Ray Service. Sep 09 16:28:52 vultr systemd[1]: v2ray.service: Start request repeated too quickly. Sep 09 16:28:52 vultr systemd[1]: v2ray.service: Failed with result 'exit-code'. Sep 09 16:28:52 vultr systemd[1]: Failed to start V2Ray Service.

这怎么解决？？

[Alvin9999]

输入以下3条命令：

sed -i "s/v2ray -config/v2ray run -config/g" /etc/systemd/system/v2ray.service.d/10-donot_touch_single_conf.conf

systemctl daemon-reload

systemctl restart v2ray

[chen510260x]

root@vultr:~# sed -i "s/v2ray -config/v2ray run -config/g" /etc/systemd/system/v2ray.service.d/10-donot_touch_single_conf.conf sed: can't read /etc/systemd/system/v2ray.service.d/10-donot_touch_single_conf.conf: No such file or directory root@vultr:~# root@vultr:~# systemctl daemon-reload root@vultr:~# root@vultr:~# systemctl restart v2ray root@vultr:~#

No such file or directory?再看了下运行状态，还是FAIL

[Alvin9999]

试试先用这个脚本来安装。 Ubuntu 16+ / Debian 8+ 系统 v2ray一键部署管理脚本：

安装命令：

source <(curl -sL https://multi.netlify.app/v2ray.sh) --zh

升级命令(保留配置文件更新)：

source <(curl -sL https://multi.netlify.app/v2ray.sh) -k

卸载命令：

source <(curl -sL https://multi.netlify.app/v2ray.sh) --remove

如果输入安装命令没反应，那是因为服务器系统没有自带curl命令，安装一下curl。

CentOS系统安装curl命令：yum install -y curl

Debian/Ubuntu系统安装curl命令：apt-get install -y curl

[Alvin9999]

把之前的v2ray卸载了，先安装v2ray后，再运行上面的3条命令。

[chen510260x]

我重新开了个新ip，脚本安装后，只是看了运行状态，就执行那3条命令了，还是一模一样的情况

[Alvin9999]

要配置账号哦

[chen510260x]

.....脚本安装完，不是直接配了一个账号了吗？而且无论我如何改动配置，V2RAY都是FAIL，启动不了

[Alvin9999]

v2ray update v4.45.2 执行这条命令，把v2ray版本降低到5以下。

[chen510260x]

好了，这次显示Active: active (running) ，具体是什么原因？

具体如下： v2ray.service - V2Ray Service Loaded: loaded (/etc/systemd/system/v2ray.service; enabled; vendor preset: enabled) Active: active (running) since Sat 2022-09-10 07:11:02 UTC; 7s ago Main PID: 4511 (v2ray) Tasks: 7 (limit: 1148) Memory: 9.5M CGroup: /system.slice/v2ray.service └─4511 /usr/bin/v2ray/v2ray -config /etc/v2ray/config.json

[Alvin9999]

v2ray升级到5后，很多脚本都报错，无法启动。