Brett

Keensy, Great to hear that you worked out the answer to your problem. If you are happy to share, it would be good to hear what you worked our in...

Maomao54922 & Syerad, I am using the same appkey. When I look at the GoSungrow logs, I see similar information where there is lots of "U" etc. However I am...

In the Addin Documentation, right at the bottom it has; Electricity grid sensor.gosungrow_virtual_XXXXXXXXXXXXXX_grid_to_load_energy sensor.gosungrow_virtual_XXXXXXXXXXXXXX_pv_to_grid_energy Solar Panels sensor.gosungrow_virtual_XXXXXXXXXXXXXX_pv_energy Home Battery Storage sensor.gosungrow_virtual_XXXXXXXXXXXXXX_battery_discharge_energy sensor.gosungrow_virtual_XXXXXXXXXXXXXX_battery_charge_energy I have not been able to find these...

Hello EGiZBYwq, Which version of GoSungrow are you using 3.0.7? I tried those settings but they did not work. The values for those entities do increase in total but at...

Hello EGiZBYwq, Thank you. I did have the "state_class" as "total" only. I see that the "state_class" of "total_increasing" should address this. I have made the change and will see...

@gjohansson-ST Thank you for the advice to check firewall rules. First up I did confirm that my Synology NAS where the Home Assistant Docker container is running was allowing port...

@hiagocosta Sorry, it is not clear to me what you are trying to do and what is not working. However I do not know too much about this. Have you...

Hello GrumpyMeow, Thank you for your information. See below what I see for my System > Network page in Home Assistant. On my NAS (where Home Assistant is running in...

@gjohansson-ST are you able to clarify if the DNS IP integration have any known issues when working with carrier grade NAT? Also does the DNS IP integration, have any known...