balena-os-device-support icon indicating copy to clipboard operation
balena-os-device-support copied to clipboard

Published 20 hours ago • verified publisher icon balena-os

Sapphire FS-FP5V

Open arafey opened this issue 5 years ago • 5 comments

  • CPU:
    AMD Ryzen™ Embedded V1000 Series (V1807B, V1756B, V1605B, or V1202B)

  • GPU: AMD Radeon™ Vega (11, 8, or 3) Graphics

  • Memory: 2x DDR4-3200 ECC SO-DIMMs

  • Storage:

    • 1x SATA III
    • M.2 M Key slot (PCIe x 4 or SATA III)

  • Features: see links below

  • Link: Official Product Page Detailed Specifications

arafey avatar Mar 21 '19 19:03 arafey

I have the hardware.

arafey avatar Mar 21 '19 19:03 arafey

Did you try to use the Intel NUC OS image on this hardware?

floion avatar Mar 23 '19 15:03 floion

I will try that today and report on the results.

arafey avatar Mar 25 '19 21:03 arafey

My initial impression is that it works! I haven't yet looked into all the relevant kernel modules but I suspect this will be a good starting point for making something more specific to this device. My biggest concern is getting the GPU to work because there were issues with the Arch Linux kernel (I suspect it was lacking Vega firmware blobs maybe?).

I couldn't get it to flash properly on an M.2 NVMe drive, although M.2 SATA was fine. It kept causing issues with the partition table and would not properly create EFI entries. There were also some recurring kernel messages that only occurred with the NVMe drive. I still have to do more tests with that.

arafey avatar Mar 27 '19 19:03 arafey

@arafey did you made any progress on this. I have a udoo bolt and was wondering on how to get the gpu working. Flashing the NIC OS Image worked fine.

steffenmllr avatar Dec 11 '19 11:12 steffenmllr