balena-os-device-support icon indicating copy to clipboard operation
balena-os-device-support copied to clipboard

Orange Pi Plus2

Open TechnoDexx opened this issue 8 years ago • 5 comments

Hardware specification

CPU H3 Quad-core Cortex-A7 H.265/HEVC 4K

GPU ·Mali400MP2 GPU @600MHz ·Supports OpenGL ES 2.0

Memory (SDRAM) 2GB DDR3 (shared with GPU)

Onboard Storage TF card (Max. 64GB) / MMC card slot , up to 2T on 2.5 SATA disk 16GB EMMC Flash

Features:

  • 10/100/1000M Ethernet RJ45
  • Realtek RTL8189ETV, IEEE 802.11 b/g/n
  • A CSI input connector Camera:

Supports 8-bit YUV422 CMOS sensor interface

Supports CCIR656 protocol for NTSC and PAL

Supports SM pixel camera sensor

Supports video capture solution up to 1080p@30fps

  • MIC
  • Supports HDMI output with HDCP
  • Supports HDMI CEC
  • Supports HDMI 30 function
  • Integrated CVBS
  • Supports simultaneous output of HDMI and CVBS
  • Audio Output 3.5 mm Jack and HDMI
  • DC input can supply power, but USB OTG input don’t supply power
  • Four USB 2.0 HOST, one USB 2.0 OTG
  • Power Button(SW4), Recovery Button(SW3), Uboot Button(SW2)
  • Low-level peripherals 40 Pins Header,compatible with Raspberry Pi B+
  • GPIO(1x3) pin UART, ground.
  • Power led & Status led
  • IR input

Supported OS

Android, Ubuntu, Debian, Rasberry Pi Image

Link: http://www.orangepi.org/orangepiplus2/

TechnoDexx avatar Jun 28 '16 10:06 TechnoDexx

+1

Temeteron avatar May 15 '17 10:05 Temeteron

+1

jcramer avatar Aug 01 '17 02:08 jcramer

+1

erangaj avatar Aug 21 '17 08:08 erangaj

+1

stelio avatar Feb 07 '18 11:02 stelio

+1

leech001 avatar Feb 23 '18 11:02 leech001