Some displays freeze after setup

[arifainchtein]

Hello, I have made a custom board that has 6 tm1637 displays connected to an esp32.
The board uses the same pin for CLK for all displays and a unique pin for each display's DAT pin I have verified that the board works ok because the following code executes correctly: #include <Arduino.h> #include <TM1637Display.h> #include <FastLED.h> uint8_t counter=0; // The amount of time (in milliseconds) between tests #define TEST_DELAY 2000

const uint8_t SEG_DONE[] = { SEG_B | SEG_C | SEG_D | SEG_E | SEG_G, // d SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, // O SEG_C | SEG_E | SEG_G, // n SEG_A | SEG_D | SEG_E | SEG_F | SEG_G // E }; #define UI_CLK 33 #define UI2_DAT 25 #define UI3_DAT 26 #define UI4_DAT 5 #define UI5_DAT 18 #define UI6_DAT 23 #define UI7_DAT 32

TM1637Display display1(UI_CLK, UI2_DAT); TM1637Display display2(UI_CLK, UI5_DAT); TM1637Display display3(UI_CLK, UI3_DAT); TM1637Display display4(UI_CLK, UI6_DAT); TM1637Display display5(UI_CLK, UI4_DAT); TM1637Display display6(UI_CLK, UI7_DAT);

long lastUpdateTime=0; long lastUpdateLed=0;

#define LED_PIN 19 #define NUM_LEDS 8 CRGB leds[NUM_LEDS]; #define MODE_PIN 34 int modePinState=1; void setup() { Serial.begin(9600); Serial.println("h"); FastLED.addLeds<WS2812, LED_PIN, GRB>(leds, NUM_LEDS); for(int i=0;i<8;i++){ leds[i] = CRGB(255, 255, 0); } FastLED.show(); pinMode(MODE_PIN, INPUT); digitalWrite(MODE_PIN, HIGH);

display1.setBrightness(0x0f); display2.setBrightness(0x0f); display3.setBrightness(0x0f); display4.setBrightness(0x0f); display5.setBrightness(0x0f); display6.setBrightness(0x0f);

display1.showNumberDec(0, false); display2.showNumberDec(0, false); display3.showNumberDec(0, false); display4.showNumberDec(9999, false); display5.showNumberDec(9999, false); display6.showNumberDec(9999, false); }

void loop() { long now = millis(); if(now-lastUpdateTime>999){ lastUpdateTime=now; display1.showNumberDec(counter, false); counter++; }else{ lastUpdateTime=0; int n2=counter+300; display2.showNumberDec(n2, false); int n3=counter+3000; display3.showNumberDec(n3, false); int n4=counter+5300; display4.showNumberDec(n4, false); display5.showNumberDec(n2, false); display6.showNumberDec(n4, false); modePinState = digitalRead(MODE_PIN); if(modePinState==HIGH){ Serial.println("Run mode"); for(int i=0;i<8;i++){ leds[i] = CRGB(0, 255, 0); } }else{ Serial.println("Program mode"); for(int i=0;i<8;i++){ leds[i] = CRGB(255, 0, 0); } } FastLED.show(); } if(now-lastUpdateLed>255){ lastUpdateLed=now; }else{ lastUpdateLed=0; if(counter>252){ counter=0; } int c=0; if(counter<125){ c=counter*2; }else{ c=(252-counter)*2; } FastLED.setBrightness(c ); display3.showNumberDec(c, false); FastLED.show(); } counter++; } All the displays update rapidly.

The issue that i have is that when I try to run the real code, in the setup function I display values in display 1 through 6 and they all work fine, however once it goes into the loop function, display 4,5 and 6 stop responding, they stay stuck in the original value, but displays 1,2 and 3 do change. I have tried putting delay(100) between display 3 and 4 ,5,6 but it does not help.display 4,5,6 dont respond to clear() or setting values.

In the simple tests all the displays were changing every second without an issue while in the real code the updates are more like every 10 seconds.

Any ideas? Thanks