runtime error: not running on a Rpi

[djk300]

I am continuing to get the Runtime error: Not running on a RPi. I am using a Raspberry pi 4B with Ubuntu Mate 20.04. I was using the same simple code on my old 3B+ and it worked fine. I have tried adding the username to the gpio group and it did not fix the issue. I have tried gpiozero and get the same error. Not sure what to do now as I read a lot of other people with the same issue but have not yet found a solution that works for me. Thanks.

code is below: import RPi.GPIO as GPIO from hx711 import HX711

#set the pin numbers for the weight sensor on raspberry pi hx = HX711(5, 6)

hx.set_reading_format("MSB", "MSB")

#set calibration factor aka reference unit hx.set_reference_unit(105) hx.reset() hx.tare() abc=input("scale is tared, press enter to start ->") #print("Tare done! Add weight now...")

#begin weight count and export to google sheet #cellcounter = 2 endloop = 10 #number of times to run the code for k in range(endloop): total = 0 endrange = 10 #number of readings to average for i in range(endrange): val = hx.get_weight(5) total = val + total #set time delay between readings hx.power_down() hx.power_up() time.sleep(0.1)

here is the error:

runfile('/home/4di/.config/spyder-py3/weightgpio.py', wdir='/home/4di/.config/spyder-py3') /usr/lib/python3/dist-packages/gpiozero/pins/pi.py:129: SPISoftwareFallback: failed to initialize hardware SPI, falling back to software (error was: failed to import spidev) warnings.warn( Traceback (most recent call last):

File "/usr/lib/python3/dist-packages/gpiozero/devices.py", line 69, in call self = cls._instances[key]

KeyError: (8,)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):

File "/usr/lib/python3/dist-packages/gpiozero/pins/pi.py", line 71, in pin pin = self.pins[n]

KeyError: 8

During handling of the above exception, another exception occurred:

Traceback (most recent call last):

File "", line 1, in runfile('/home/4di/.config/spyder-py3/weightgpio.py', wdir='/home/4di/.config/spyder-py3')

File "/usr/lib/python3/dist-packages/spyder_kernels/customize/spydercustomize.py", line 827, in runfile execfile(filename, namespace)

File "/usr/lib/python3/dist-packages/spyder_kernels/customize/spydercustomize.py", line 110, in execfile exec(compile(f.read(), filename, 'exec'), namespace)

File "/home/4di/.config/spyder-py3/weightgpio.py", line 4, in spi = HX711()

File "/usr/lib/python3/dist-packages/gpiozero/devices.py", line 95, in call self = super(GPIOMeta, cls).call(*args, **kwargs)

File "/home/4di/.local/lib/python3.8/site-packages/hx711_gpiozero/init.py", line 19, in init super().init(bits, max_voltage, **spi_args)

File "/usr/lib/python3/dist-packages/gpiozero/spi_devices.py", line 128, in init super(AnalogInputDevice, self).init(shared=True, **spi_args)

File "/usr/lib/python3/dist-packages/gpiozero/spi_devices.py", line 34, in init self._spi = self.pin_factory.spi(**spi_args)

File "/usr/lib/python3/dist-packages/gpiozero/pins/pi.py", line 142, in spi return self.spi_classes[('software', shared)](self, **spi_args)

File "/usr/lib/python3/dist-packages/gpiozero/devices.py", line 72, in call self = super(GPIOMeta, cls).call(*args, **kwargs)

File "/usr/lib/python3/dist-packages/gpiozero/pins/local.py", line 152, in init super(LocalPiSoftwareSPI, self).init(select_pin, active_high=False)

File "/usr/lib/python3/dist-packages/gpiozero/output_devices.py", line 47, in init super(OutputDevice, self).init(pin, pin_factory=pin_factory)

File "/usr/lib/python3/dist-packages/gpiozero/mixins.py", line 69, in init super(SourceMixin, self).init(*args, **kwargs)

File "/usr/lib/python3/dist-packages/gpiozero/devices.py", line 375, in init pin = self.pin_factory.pin(pin)

File "/usr/lib/python3/dist-packages/gpiozero/pins/pi.py", line 73, in pin pin = self.pin_class(self, n)

File "/usr/lib/python3/dist-packages/gpiozero/pins/rpigpio.py", line 101, in init GPIO.setup(self.number, GPIO.IN, self.GPIO_PULL_UPS[self._pull])

[avafinger]

failed to initialize hardware SPI,

You have to enable spi (0 or 1) or spidev0 or spidev1 for your need. It is "disabled" by default in DTB.

Steps:

1. install dtc

   sudo apt-get install device-tree-compiler
   

2. Decompile the currently DTB file in use, find it with:

    cd /boot
    ls -la bpi-m2-zero.dtb
   

3. If the file is (for example, you did not specify): bpi-m2-zero-v4.dtb_5.7.10, decompile it

    sudo dtc -O dts -o m2z.dts bpi-m2-zero-v4.dtb
   

4 . Edit the file (use jed or any other text editor) , change the spi you need (and the one that can work on M2Z)

	spi@1c68000 {
		compatible = "allwinner,sun8i-h3-spi";
		reg = <0x1c68000 0x1000>;
		interrupts = <0x0 0x41 0x4>;
		clocks = <0x3 0x1e 0x3 0x52>;
		clock-names = "ahb", "mod";
		dmas = <0x15 0x17 0x15 0x17>;
		dma-names = "rx", "tx";
		pinctrl-names = "default";
		pinctrl-0 = <0x16 0x17>;
		resets = <0x3 0xf>;
		status = "disabled"; <==== change it do "okay"
		#address-cells = <0x1>;
		#size-cells = <0x0>;
		cs-gpios = <0xc 0x2 0x3 0x0 0xc 0x0 0x6 0x0>;

		spi@0 {
			compatible = "nanopi,spidev"; <==== change it to "ge,achc"
			reg = <0x0>;
			status = "okay";
			spi-max-frequency = <0x989680>;
		};

	};

	spi@1c69000 {
		compatible = "allwinner,sun8i-h3-spi";
		reg = <0x1c69000 0x1000>;
		interrupts = <0x0 0x42 0x4>;
		clocks = <0x3 0x1f 0x3 0x53>;
		clock-names = "ahb", "mod";
		dmas = <0x15 0x18 0x15 0x18>;
		dma-names = "rx", "tx";
		pinctrl-names = "default";
		pinctrl-0 = <0x18>;
		resets = <0x3 0x10>;
		status = "disabled"; <==== change it do "okay"
		#address-cells = <0x1>;
		#size-cells = <0x0>;

		spi@0 {
			compatible = "nanopi,spidev"; <==== change it to "ge,achc"
			reg = <0x0>;
			spi-max-frequency = <0x989680>;
		};
	};
   

5. after you enable the correct spi (spidev) you recompile it and make it default

    sudo dtc -I dts -O dtb -o m2z.dtb m2z.dts
    sudo ln -sf m2z.dtb bpi-m2-zero-v4.dtb
    sudo reboot
   

[djk300]

thank you, but during step 2 i get the following: /boot$ ls -la bpi-m2-zero.dtb ls: cannot access 'bpi-m2-zero.dtb': No such file or directory

these are what is in the boot dir: config-5.4.0-1015-raspi initrd.img-5.4.0-1015-raspi config-5.4.0-1016-raspi initrd.img-5.4.0-1016-raspi dtb initrd.img.old dtb-5.4.0-1015-raspi System.map-5.4.0-1015-raspi dtb-5.4.0-1016-raspi System.map-5.4.0-1016-raspi dtbs vmlinuz firmware vmlinuz-5.4.0-1015-raspi grub vmlinuz-5.4.0-1016-raspi initrd.img vmlinuz.old

for step 3, which file needs to be specified?

[avafinger]

It should be:

ls -la bpi-m2-zero-v4.dtb

But, but, but wait a minute, i realized you are running raspi on m2z, is that correct? Unfortunately this question must be directed to the raspi creators. :)

Sorry, i can't help you with raspi.