Julien Staub

my esp32-CAM only has seen 3.0. Anyway I tried `[ESP444]RESET` and it did not change anything. edit : I tried ESP103 to change IPs to 192.168.1.1 (my box) instead of...

> why using static IP ? why putting same ip as you box ? No I use DHCP. and my box is on 192.168.1.0 I just tried this because I...

I will check later when coming home. thanks for screencast.

Good news : I suppose I didn't have the right index.html.gz before I tried https://github.com/luc-github/ESP3D/tree/3.0-refactoring and https://github.com/luc-github/ESP3D-WEBUI/tree/3.0-rewrite with the index.html.gz from marlin directory and this seems to work. Questions from...

Thanks for all these explanations. SSID has a _ char but it worked on 2.1 and password is completely normal chars with letters and numbers. I will try the sample...

I don't know what I did wrong but I made everything clean again and this time it worked. I suppose writing the wiki helped me understand what to clean and...

you could put everything in a zip and add it to assets (to have folder to differentiate all files with same names)

Yes but this is additional steps, user must understand the need to go to WEBUI repo (for new user this is NOT immediate) and the search into folders (dist is...

@luc-github sorry to bother you again... So I did several test on my ESP32CAM board. It's [this](https://fr.aliexpress.com/item/32981449079.html) one and picture is accurate with what I got. Notice the logo is...

There is resistor for choosing between connector and F antenna. The F antenna (PCB antenna) is used in my case. Also the client mode works fine and the board is...