Error on ESP32-C3 chip (invalid header: 0xffffffff)

[oltarasenko]

Hi,

I am trying to upload a release for esp32-c3 on the device:

esptool.py \
--chip esp32-c3 \
--port /dev/cu.usbmodem14201 --baud 921600 \
--before default_reset --after hard_reset \
write_flash -u \
--flash_mode dio --flash_freq 40m --flash_size detect \
0x1000 \
/Users/oleg/Downloads/AtomVM-esp32c3-v0.6.5.img

but seeing the following error

invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff
invalid header: 0xffffffff

[pguyot]

I think esp32-c3 should be flashed at offset 0 not 0x1000. Did you try to replace 0x1000 with 0 in your command line?