atlas0fd00m

just pushed the update. please try again. also, be careful when pushing new firmware! SDCCv3.8.0 *does not work with RfCat* and could *possibly corrupt the bootloader*. if you are compiling...

it depends. RfCat does not transmit, to my knowledge, in the "FM Radio" range (88-108MHz). it gets close, but not quite. *but* if it did, the best you could do...

thanks for the headsup, btw. glad to know it was broken, and now that it worked for you.

it can transmit just fine, but only in the defined frequency ranges the radio was created to use. for the most part, this includes the following ISM Bands (for CC1111...

when you put it into bootloader mode, what shows up in /dev? `ls -la /dev/RF*` have you installed the udev rules?

you may have uploaded bad firmware to your YS1 by using SDCC 3.8.0. however, thanks for @argilo 's recent PR, i think you may be able to use modern SDCC's...

@meeas , just got a patch to work around a bug in SDCC >3.5.0. would love to hear your experience. i haven't cut a new release yet, it's just fresh...

thanks @meeas ! the SDCC bug was just confirmed. i look forward to your experiences with compiling with the newer SDCC. yes, RfCat can be flashed with pre-compiled firmware, which...

was this resolved to your satisfaction? do you still need help? (if so, i'm terribly sorry for the delay)

i have to admit, i haven't run CanCat on the UNO in over 4 years. the DUE (ARM-based) is so much more powerful and i had issues with the UNO...