Broken FAN (Dell R320) not showing up.

[kimfr]

I have a Dell R320 with 2 broken system fans - these are not showing up at all in the integration. Output from command line:

ipmitool -I lanplus -H <ip> -U root -P <pwd> sdr list full
Fan1A            | 7560 RPM          | ok
Fan1B            | 7080 RPM          | ok
Fan2A            | 7320 RPM          | ok
Fan2B            | 7080 RPM          | ok
Fan3A            | 7320 RPM          | ok
Fan3B            | 0 RPM             | cr
Fan4A            | 7320 RPM          | ok
Fan4B            | 0 RPM             | cr
Fan5A            | 7320 RPM          | ok
Fan5B            | 7080 RPM          | ok
Inlet Temp       | 32 degrees C      | ok
Current 1        | 0.40 Amps         | ok
Current 2        | 0 Amps            | ok
Voltage 1        | 240 Volts         | ok
Voltage 2        | 240 Volts         | ok
Pwr Consumption  | 84 Watts          | ok
Temp             | 46 degrees C      | ok

I wanted to use HA to monitor the FAN and report if any has failed.