usb-sniffer
usb-sniffer copied to clipboard
ataradov
Low-cost LS/FS/HS USB sniffer with Wireshark interface
Hi, and thanks for this cool project. I have build the hardware and programmed the MCU und FPGA. Everything worked fine until the test procedure. I got 0.00 MB/s at...
It would be useful to have through hole pad options for the on board LEDS, once the PCB is in an enclosure the LED's are no longer visible, I can...
First, thank you for this project, this required a lot of research and work. I see Infineon supports MacOS with the CY7C68013A MCU. You have done the heavy lifting on...
Hi, I captured a device like usb printer with high speed. If I print one page with simple content, it is OK. But if I print one page with complex...
My device is compatible with HS and FS communication. It works in HS by default. When the HS handshake fails, it will automatically switch to the FS handshake. I hope...
DigiKey lists as EOL: https://www.digikey.com/en/products/detail/microchip-technology/DSC6101CI2A-026-0000/8639220 Any reason this won't work: https://www.digikey.com/en/products/detail/microchip-technology/DSC1001CI5-026-0000/5046185 (power down instead of enable)
Hi, I've built two boards and both works fine with low-speed and full-speed devices. However if I try to connect any high-speed device such as a android smartphone, the device...
 The 2.0 USB drive passed the test without any issues, but the 3.0 USB drive encountered errors during testing。Hardware buffer overflow
Hi @ataradov , thanks for great project to analyze USB traffic. I notice the LCMXO2-2000HC-5TG100 component is not part of Kicad libaries. I've modified the component and split it into...
It feels akin to utilizing an external triggering function, similar to the level triggering feature in a logic analyzer.How do I use it?