Alex Taradov

They have been EOL for a while, I just have them in stock, so I'm using them in my designs. There are a lot of compatible parts. The one you...

For this design, I don't really want to do anything with the LEDs. In my case I relied on the gray plastic being transparent, and it works well enough. LEDs...

No, there are not. I don't have any Apple hardware, so I have no way to make a port. Assuming libusb works there, the port should not be too hard,...

I'll try to merge this into the main repo. I won't be able to test it, but at hopefully it will be helpful to some extent. Does -fno-diagnostics-show-caret not work...

I've updated the Makefile. That option is cosmetic, it disables spam on errors, which I hate. And since development is done on Linux, I just moved it under the Linux...

There is no way to automatically switch the speed. First of all, there is no reliable way of doing this. The speed negotiation is a process that can be interpreted...

Maximum theoretical USB HS transfer rate is ~53 MB/s after physical protocol overhead. But with the way practical host schedule transfers, you get 48-49 MB/s as a maximum practical transfer...

Replacing with a different FPGA will not do anything for lost packets. The same JED file will work for all speed grades. In the deleted comments you mention your ID...

This is a strange thing to fake, since it will be discovered right away. Those devices have different bit-stream size, so programming would not work even if you change the...

Try different USB port on the PC and don't use hubs for the target device. Also make sure that the board are clean from flux contamination. Some fluxes are mildly...