asgothian

This is an indication that the siren does not respond. - Do you get status updates from the siren at all ? - Do you get similar messages when the...

No, i was thinking about the separate states mode, level, duration, etc.

please remove the device and pair it again - at the location you use it. It seems there is an issue with the communication to the device, on top of...

The execute_warning state should no longer be active for any of the sirens with the current zigbee-herdsman-converters as that was changed. No communication seems to work as the messages sent...

The relevant components are the zigbee-herdsman and zigbee-herdsman-converters project. There have been a large number of changes in the [zigbee-herdsman-converters](https://github.com/Koenkk/zigbee-herdsman-converters) project as they have been moving towards a system which...

Please check the log for messages when the device does not switch. Note that you need to perform this test without your workaround being active to see what the response...

so the device accepts the command to switch off but ignores it ?

does the device confirm the state change (i.e. does the value turn green in admin) ?

This is an error in the device Firmware then. If the device confirms receipt of the message it should switch. I do not see how this can be fixed in...

> Welcome to the Madness which is TuYa. Seems that the firmware of the device has been updated to use previously unknown data codes, i.e. the code 106 and 107....