Andras Salamon

As far as I remember this should work. Things usually work better in the command line version, so I would check that first. Can you send me the output of...

I added a workaround for the camera max shutter speed field, but it will not really help. One thing I remembered: some of the newer models prefer if you first...

What operating system do you use? First, please set the camera to bulb mode and execute the following command and copy the result here: pktriggercord-cli --debug --status_hex Please also try...

The Bulb mode setting on the camera is correctly recognized, but the camera does not accept the bulb start command. It might be firmware limitation, or the K-50 requires a...

@Blueshawk Thanks, waiting for the pull request. ;)

I've fixed a similar bug for K-70, hopefully the solution will work also for K-50. I need the output of the following command twice. Once when the camera is set...

@Blueshawk Setting the dial to "B" is the best, I'm not sure about the user modes. K-70 has two bulb modes (green button can change between them) one is the...

@Blueshawk Thanks to your 2 debug logs, I've commited a change, now the program is able to read to bulb mode of K-50 (press-press or press-hold). Please try it. It...

I've tried press-press mode and sent a shutter command (pslr_shutter) waited for a few seconds and sent a second pslr_shutter command but it was not working. The second call of...