artisan-roaster-scope
Modbus Issue Coffee Tech Silon Zr7
Hello,
I am trying to figure out a problem I am having with my brand new Silon Roaster, basically I am getting very spotty/laggy temperature readings resulting in my ror spiking all over the place. Its been happing since I got the machine and I am pulling my hair out trying to figure this out. I am getting modbus errors constantly and the problem seems to get worst as the temperature increases, I have attached a profile for example. really at a loss what to do next as I am computer literate but not with modbus unfortunately. Any help would be appreciated .
I initially had Artisan 2.4.4 but updated to 2.6.0 and then 2.6.1 to see if that helped but no change with all versions, also the manufacturer has updated their software on the allen bradley controller.
I am running this on a PC with the latest windows version and connecting directly through cat 6 sheilded ethernet
To understand what is happening here we need your Artisan log file as we do not have access to that machine. Please do the following:
- Install Artisan v2.6.0 or even better the current beta version 2.6.1.
- Hold the ALT+CTRL keys and click on the plus icon in the upper left corner to toggle to the debug logging mode. You should see the message "debug logging ON" in the message line.
- Record some minutes using Artisan as you would for roasting
- Hold the ALT key and click again on the plus icon. An email should open with the Artisan log files attached. Please send this message to [email protected] and will take a look.
If possible attach also the recorded .alog profile to that email.
Thank you Marko!
I will send that through today
On Mon, Sep 5, 2022, 23:02 Marko Luther @.***> wrote:
To understand what is happening here we need your Artisan log file as we do not have access to that machine. Please do the following:
- Install Artisan v2.6.0 or even better the current beta version 2.6.1.
- Hold the ALT+CTRL keys and click on the plus icon in the upper left corner to toggle to the debug logging mode. You should see the message "debug logging ON" in the message line.
- Record some minutes using Artisan as you would for roasting
- Hold the ALT key and click again on the plus icon. An email should open with the Artisan log files attached. Please send this message to @.*** and will take a look.
— Reply to this email directly, view it on GitHub https://github.com/artisan-roaster-scope/artisan/issues/950#issuecomment-1236851778, or unsubscribe https://github.com/notifications/unsubscribe-auth/A245RKGDOGBJPDOBPXE744DV4XHMNANCNFSM6AAAAAAQEUKLOE . You are receiving this because you authored the thread.Message ID: @.***>
Hi Marko,
No I did, you identified some issues with the MODBUS and instructed me to change some settings.
Unfortunately it didn't help but I appreciate you looking into for me. Coffee Tech are sending out some parts that will hopefully address the issue.
Thanks again
Dion
On Mon, Sep 26, 2022, 05:10 Marko Luther @.***> wrote:
Never received anything from you. Is this case closed?
— Reply to this email directly, view it on GitHub https://github.com/artisan-roaster-scope/artisan/issues/950#issuecomment-1257225800, or unsubscribe https://github.com/notifications/unsubscribe-auth/A245RKF6H4GPJ2BOVABWAMTWAB2PDANCNFSM6AAAAAAQEUKLOE . You are receiving this because you authored the thread.Message ID: @.***>
Hi Dion if you don't mind to share how was it fixed, what parts were replaced ? thank you
Hi Marko,
All I ended up being sent was a wifi modem to connect the roaster to the computer... However this did not solve the problem. My only solution has been to bypass their system entirely using my own probes and have connected to a phidget 1048. I use the control systems on the roaster but ignore all temperature data coming from the machine as it's just not accurate.
Cheers
Dion Milanesi
On Mon, Oct 17, 2022, 03:47 s4reea @.***> wrote:
Hi Dion if you don't mind to share how was it fixed, what parts were replaced ? thank you
— Reply to this email directly, view it on GitHub https://github.com/artisan-roaster-scope/artisan/issues/950#issuecomment-1279984322, or unsubscribe https://github.com/notifications/unsubscribe-auth/A245RKCNZFAKFNAC7TGNZ63WDQIRTANCNFSM6AAAAAAQEUKLOE . You are receiving this because you authored the thread.Message ID: @.***>
Oh is this not Marko?
I'm based in New Zealand... Do you also have a Silon Zr7?
On Tue, Oct 25, 2022, 09:15 s4reea @.***> wrote:
Thanks for sharing How can I contact you ?
— Reply to this email directly, view it on GitHub https://github.com/artisan-roaster-scope/artisan/issues/950#issuecomment-1289556895, or unsubscribe https://github.com/notifications/unsubscribe-auth/A245RKGK7422WAOFUBFJ4TLWE3U5DANCNFSM6AAAAAAQEUKLOE . You are receiving this because you authored the thread.Message ID: @.***>
Oh is this not Marko? I'm based in New Zealand... Do you also have a Silon Zr7? … On Tue, Oct 25, 2022, 09:15 s4reea @.> wrote: Thanks for sharing How can I contact you ? — Reply to this email directly, view it on GitHub <#950 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A245RKGK7422WAOFUBFJ4TLWE3U5DANCNFSM6AAAAAAQEUKLOE . You are receiving this because you authored the thread.Message ID: @.>
I roast on Ghibli R15 :)
Are you also having trouble with artisan integration? I find that my temperature readings from the machines probes are not giving me accurate readings
On Tue, Nov 1, 2022, 09:54 s4reea @.***> wrote:
Oh is this not Marko? I'm based in New Zealand... Do you also have a Silon Zr7? … <#m_7503928824682337058_> On Tue, Oct 25, 2022, 09:15 s4reea @.> wrote: Thanks for sharing How can I contact you ? — Reply to this email directly, view it on GitHub <#950 (comment) https://github.com/artisan-roaster-scope/artisan/issues/950#issuecomment-1289556895>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A245RKGK7422WAOFUBFJ4TLWE3U5DANCNFSM6AAAAAAQEUKLOE https://github.com/notifications/unsubscribe-auth/A245RKGK7422WAOFUBFJ4TLWE3U5DANCNFSM6AAAAAAQEUKLOE . You are receiving this because you authored the thread.Message ID: @.>
I roast on Ghibli R15 :)
— Reply to this email directly, view it on GitHub https://github.com/artisan-roaster-scope/artisan/issues/950#issuecomment-1297673649, or unsubscribe https://github.com/notifications/unsubscribe-auth/A245RKAJFUDMYOP7KXSVKVLWGAW2FANCNFSM6AAAAAAQEUKLOE . You are receiving this because you authored the thread.Message ID: @.***>
Not trouble I figured that you need to use slow sampling rate, 1s is too fast.
Lets talk on Telegram @s4reea