FreeModbus_Slave-Master-RTT-STM32
FreeModbus_Slave-Master-RTT-STM32 copied to clipboard
armink
TCP master port
Does anybody have tcp port for master? Because I want to try modbus with lwip,.... slave is working, and master not.
Does anybody have tcp port for master? Because I want to try modbus with lwip,.... slave is working, and master not.
do you have the tcp port?
No I have not. It is second problem for mě.
I found it at https://github.com/cwalter-at/freemodbus doc dir. Maybe you can find it there too.
If you want to run a TCP Master, chances are you are running it on moře advance Platform such as raspberry pi. In that case consider to use some alternative such as Libmodbus of Pymodbus. Especially the later is super easy to start with.
Regards Petr
Dne po 23. 12. 2019 15:53 uživatel rainbowyu [email protected] napsal:
No I have not. It is second problem for mě.
I found it at https://github.com/cwalter-at/freemodbus doc dir. Maybe you can find it there too.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32/issues/38?email_source=notifications&email_token=ABMUQANQRBKJQRR67LZIIVLQ2DGGDA5CNFSM4GQSUE5KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEHRI6OY#issuecomment-568495931, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABMUQAMUJ2CQ4B27X7GYKUTQ2DGGDANCNFSM4GQSUE5A .
Hi. I have a master tcp port for cwalter-at / freemodbus. It is working fine. And now I try to implement this modbus (from armlink).