LaserGRBL Axis Direction Is Reversed

I have two CNC's. 3040ProVerV2 LightBurn, LaserGRBL, Candle and UGS. When I co connect LaserGRBL it runs the axes the wrong way. The others are correct. When I ran LaserGRBL on a new GRBL board on a Sainsmart 3018, I had to change the settings in its GRBL. My Prover V2 grbl is

$0=10 $1=25 $2=0 $3=1 $4=0 $5=0 $6=0 $10=3 $11=0.010 $12=0.002 $13=0 $20=0 $21=1 $22=1 $23=0 $24=100.000 $25=1000.000 $26=250 $27=3.000 $30=10000 $31=0 $32=0 $100=400.000 $101=400.000 $102=400.000 $110=5000.000 $111=5000.000 $112=5000.000 $120=300.000 $121=300.000 $122=300.000 $130=400.000 $131=300.000 $132=100.000

Thank you

Lawrence

Oct 08 '23 21:10 lawrencek9303

Any news on this comment - Please!

Oct 17 '23 14:10 lawrencek9303

LaserGRBL use cartesian axis convention, x grow from left to right, y grow from near to far. If your laser react diversely, you can simply adjust grbl axis configuration

Oct 17 '23 16:10 arkypita

https://lasergrbl.com/configuration/

Oct 17 '23 16:10 arkypita

Hi there,

I cant change the GRBL, because the machine will not run properly with other SW, like CANDLE. Difficult also to get homing then. Can I change this in LaserGRBL?

Oct 18 '23 11:10 lawrencek9303