Reset Highest received CO2 value

[BlueCase]

Hi, I have a HRU350 and currently try to connect it with HomeAssistant. By this I found few topic's and hope someone can answer my questions.

1. Is it possible to reset the "Highest received CO2 value"?
2. I tried the reset Filter function. Not working (Know a alpha feature but perhaps the information help)
3. What Label Status mean? Currently I have the value 5.

Thanks in advance...

[arjenhiemstra]

As far as I know there is no active way to reset the "Highest received CO2 value".

About the filter reset function; I expect it to work only if: 1- the virtual remote type is set to RFT AUTO (that is the only remote that has this function as far as I know) 2- you have sent the filter reset quick enough, I just looked at this (https://www.youtube.com/watch?v=peKzWCsLyrg) clip and I think it is quite impossible to achieve with the add-on in the current setup. Probable it needs a function like "reset filter on next boot"

What Label Status mean? Currently I have the value 5.

Which status label do you mean? The meaning of labels not only depends on your itho model but also differs between firmware version.

[BlueCase]

Thanks for your answer.

I mean the label "status" in the "itho status" view

[arjenhiemstra]

Could you post a screenshot?

[BlueCase]

[arjenhiemstra]

1	normaal	WTW bedrijf
2	vorstklep	Vorstklep verstellen
3	aanvoerfan	Aanvoer ventilator aftoeren
4	afvoerfan	Afvoer ventilator optoeren
5	aan uit	Aanvoer ventilator stil

This is what I get from the itho tool

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[BlueCase]

@arjenhiemstra Sorry but I had not time to investigate further. What status 5 mean. I translated it with google but the result make no sense. :D I think the meaning is "on off - Supply Fan off". But make no sense because all Fan's running. Checked that. Wrong meassage? Normal? Something broken? No idea..

Also a additional Question: Can I force open the Bypass anyway. Would only check if its work because I currently not understand exactly when the Fan open the bypass.

Thanks for your help!

[BlueCase]

Ok self healing... Seams Status 5 is always the default after a Power unplug and switch to 0 after a while.

Also the bypass need a while to work probably after a power on/off.

Thanks for your help