RoboMowRC
RoboMowRC copied to clipboard
arjanmels
Just curious if you will be developing this any more?
I'd be happy to support with testing if that is the case.
I've got a RS625 (2017 model).
I’m also interested in this project.
Would love to integrate my robomow with home assistant
I am interested as well! And have ordered the board and hope to be able to help a bit on the development.
I would not mind spending some time on it. Does the current version compile for any of you? (I get multiple problems at the moment)
I have to code compiled, deployed, connected and authenticated to my RoboMow RX. I am receiving the relevant updates over mqtt. Does anyone know if control is already implemented? And if yes how to use it?
I want to get going on this also this summer. I've got an RS630 in mind i want tot connect it to.
What hardware/setup did you use @joostwestra ?
Currently using a full esp-wrover-kit, which is a bit of overkill. But you do need an esp32 with psram, otherwise it currently crashes (I tested that)
Quite some time ago i bought a TTGO T-Beam board board just to run this ;-) Its compiling, connecting and publishing to mqtt, but... (basically same questions as joostwestra ;-)
- can anyone tell me how to send commands to it? or maybe made a command page on the esp?
- would anyone already have made a status page (on the esp?)
- it seems that after every reboot all the settings are missing (serial, mqtt server), is this normal?
Hello. Is this project still under development? I am very interested. Thank you
Bonjour. Ce projet est-il encore en cours de développement ? Je suis très intéressé. Merci
I does not appear to be maintained anymore at all. I personally would not mind patches some small glitches. But as far as I can tel the project current does not implement sending any commands to the robot at all.
I'm working on my own MQTT-Robomow interface for some time now. I also use an ESP32 to connect to my RS615u and send him commands. Can't share any code yet, but will keep you updated!
@TheCutter thats interesting! What hardware platform are you using ? I'm interested in testing if you like.
I'm using an ESP-WROOM-32 Devboard. My plan is to start mowing from my Node-Red Installation via MQTT, based on time, weather and other properties.
I would also be interested in this! would it be possible to get status updates as well? For logging how when it leaves and returns, of get a push message when there is a problem (stuck, something in the mowing deck,...)?
Yes sure. Current State is also planed. But it will be a polling update every x minutes with MQTT. At least that's my plan. :)
I created a new repository to discuss further ideas over here: https://github.com/TheCutter/RoboMow2MQTT/issues/1
I stumbled upon this: https://www.skyynet.de/mowgli_connect.php
But it is all in german, so I made my own repo about it and also made a really dirty script to translate the german in the (binary) file. https://github.com/MortenVinding/Robomow-ESP32
Let me know if it's useful and if I should change anything.
Cool, I will check what firmware my Robomow is running and hopefully give this a try!