DLO-138
DLO-138 copied to clipboard
ardyesp
An open source firmware for DSO-138 O-Scope
Hi, is it assembler code problem in "capture.ino" file or should I ignore these warnings? Arduino 1.8.5 and Arduino SAM Boards (32-bits ARM Cortex-M3) 1.6.11. C:\Users\mr-x\AppData\Local\Temp\ccEP3Imt.s: Assembler messages: C:\Users\mr-x\AppData\Local\Temp\ccEP3Imt.s:464: Warning:...
I can't tell that this has any XY 2 channel function is it possible to add an XY function to use this as a vectorscope?
It is not an issue, but a question: is the firmware compatible with DSO138mini ? If not, do you have an idea, what differs DSO138mini from DSO138? (from firmware development...
First of all I want to thank you devs for this project. I'm happy to see that it's still maintained :) Now I found no tool to parse and plot...
Can someone give me a compiled download? I compiled mine with no errors, flashed it but there is only a white screen. I've downgraded the library like it is mentioned...
On DLO-138_switches_1.0.bin from 26 Feb 2017: When the indication is 10 ms/div it is actually 5 ms/div. So a pulse with duration 10 ms shall be displayed in a single...
Can someone provide a link to the Arduino board definition file with which this compiles and uploads with Arduino IDE in the original DSO-13803/04 hardware .
Hi ardyesp. first of all Thanks a lot for this firmware As I said, I confronted this issue, I assumed it should be a problem with negative voltage rail because...
**HW:** brand new DSO138 (most probably not original, but clone. based on assembly manual, it's a Rev.05, 13803k-13804k version). Without "trigger switch" modification, with encoder mod. **SW:** DLO-138_encoder_1.0.bin, DLO-138_switches_1.0.bin, also...
Hi, the software flashing is flawless, thank you :) Can you provide a guide for the dual analog probing and reading data from usb? Thank you
