Ethernet
Ethernet copied to clipboard
arduino-libraries
Ethernet Library for Arduino
_From @jonface on November 7, 2014 23:31_ Arduino v1.5.8 Problem: The source port for a client TCP connection is fixed to start from 1024. If the micro controller is connect...
_From @WildOrangutan on May 14, 2015 22:49_ Hi! Please implement something like this, to avoid w5100 buffer overflow, when constantly sending data as fast as possible: ``` C++ int EthernetClient::free()...
_From @Apollon77 on September 20, 2015 20:53_ _Copied from original issue: arduino/Arduino#3829_ I use a library where the `EthernetClient` instance is created once and then reused. This was not really...
return type is just positive and does not use more than 1 byte
…hile DNS requests and TCP:open/close awaiting for results
In order to use this library as a ESP-IDF component (ESP32), we need these component registration files in place. They are non-intrusive and shouldn't influence other parts of your library,...
For use another than defined SPI "port", you need: 0. Declare an SPI class object with appropriate pins **SPIClass SPI_2(PB15, PB14, PB13);** I have try SPI2 on STM32F103xB also known...
If there is network connectivity and a socket is connected, but there is currently no route to the host or the host isn't responding, a client flush call can wait...
While doing performance tests, I noticed that the special SPI.transfer(writebuf,readbuf,count) is only called for write, but not for read. As this massively speeds up data throughput on supported MCUs, please...
added DNS_TIMEOUT and DNS_RETRIES definition to make possible change it in main program
